Download or read book Guidelines for Testing Large Seismic Isolator and Energy Dissipation Devices written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2002-01-01 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report outlines the HITEC Technical Evaluation Plan for large seismic isolator and energy dissipation devices. The plan is designed to characterize the fundamental properties and performance characteritics of a wide range of devices produced by U.S. and overseas manufacturers. It describes a program of full-scale dynamic tests, the results of which should provide guidance to the transportation-engineering community regarding the performance of large seismic devices.
Download or read book Guide Specifications for Seismic Isolation Design written by and published by AASHTO. This book was released on 2010 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.
Download or read book Summary of Evaluation Findings for the Testing of Seismic Isolation and Energy Dissipating Devices written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1999-01-01 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. his report summarizes the results of an evaluation that was designed to test the performance of 11 seismic isolators and dampers. The devices were tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Environmental Technology Verification Report for the Plasma Enhanced Melter written by and published by ASCE Publications. This book was released on 2003-01-01 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Environmental Technology Evaluation Center (EvTEC), a service center of CERF/IIEC. This Technology Verification report describes the nature and scope of the environmental evaluation of the performance of the Plasma Enhanced Melter? (PEM?) system for waste treatment. The evaluation was conducted through a cooperative program established in 1998 between the Washington State Department of Ecology, Integrated Environmental Technology Inc., Allied Technology Group, and the Civil Engineering Research Foundation. The goal of this report is to provide potential users and purchasers of the PEM? system with information they need to make more informed decisions regarding the performance of PEM? as an equivalent or alternative to incineration for treating hazardous waste.
Download or read book Evaluation of the Tricon Retained Soil Wall System written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2002-01-01 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center, a CERF/IIEC Innovation Center. This report describes a HITEC evaluation designed to determine the basic capabilities and limitations of the Tricon System for use as a technically viable, precast, mechanically stabilized earth-retaining wall system. The evaluation considered material, design, construction, performance, and quality assurance information outlined in the HITEC Protocol.
Download or read book Evaluation of the Geo Con VERT Wall System written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2002-01-01 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF/IIEC Innovation Center This report describes a HITEC evaluation designed to determine the basic capabilites and limitations of the Geo-Con VERT Wall for use as a technically viable permanent excavation support retaining wall system. The evaluation was conducted based on design, construction, performance, and quality assurance information outlined in the HITEC Protocol. The Geo-Con VERT Wall System is an in-situ retaining wall system intended as an alternative to other types of cut walls such as soldier pile and anchored retaining walls. Geo-Con VERT Wall System is comprised of: deep soil mix columns consisting of overlapping or tangent soil-cement columns along the front face backed up by tangent rows of overlapping soil-cement columns; a soil-cement relieving platform overtop the columns; steel beams embedded in the front face soil-cement columns for support of the permanent facing; and permanent facing consisting of precast, reinforced concrete panels or reinforced cast-in-place concrete. The relieving platform is intended to provide internal stability by typing the soil-mix columns together and transferring the load to the bottom of the columns.
Download or read book Guidelines for the Testing of Seismic Isolation and Energy Dissipating Devices written by Civil Engineering Research Foundation and published by . This book was released on 1996 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from the June 1995 symposium describe recent discoveries in the genetics, biochemistry, biology, pharmacology, and clinical aspects of neuropeptide research. After a history of the field, coverage includes the use of transgenic and knockout mice in neuropeptide research; CRF- receptor subtypes; individual differences in responses to the behavioral actions of peptides; new peptide-processing enzymes; neuropeptidase gene regulation; interactions and coexistance of neuropeptides and serotonin in spinal autonomic systems; and peptide modulators of serotonin pathways. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Evaluation Findings for Oiles Multiple Viscous Shear Damper written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1999-01-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of Multiple Viscous Shear Damper (MS Damper),Ømanufactured by Oiles. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Evaluation Findings for R J Watson Inc Sliding Isolation Bearings written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1998-01-01 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of sliding isolation bearings,Ømanufactured by R.J. Watson, Inc. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Evaluation Findings for Tekton Inc Steel Rubber Bearings written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1998-01-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of steel rubber bearings,Ømanufactured by Tekton, Inc. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Evaluation Findings for Seismic Energy Products L P Elastomeric Isolation Bearing written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2001-01-01 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report presents the results of a detailed evaluation for one seismic isolator supplied by Seismic Energy Products, L.P. The evaluation is designed to test the performance of seismic isolators and dampers.
Download or read book Evaluation Findings for Tekton Inc Roller Bearings written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1998-01-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of roller bearings,Ømanufactured by Tekton, Inc. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subjec
Download or read book Bridge Engineering Handbook Five Volume Set written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 3042 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection provides detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject, and also highlights bridges from around the world. This second edition of the bestselling Bridge Engineering Handbook covers virtually all the information an engineer would need to know about any type of bridge-from planning to construction to maintenance. It contains more than 2,500 tables, charts, and illustrations in a practical, ready-to-use format. An abundance of worked-out examples gives readers numerous practical step-by-step design procedures. Special attention is given to rehabilitation, retrofit, and maintenance. Coverage also includes seismic design and building materials. Thoroughly revised and updated, this second edition contains 26 new chapters.
Download or read book Evaluation Findings for Skellerup Base Isolation Elastomeric Bearings written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1998-01-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of base isolation elastomeric bearings,Ømanufactured by Skellerup. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Evaluation Findings for Scougal Rubber Corporation High Damping Rubber Bearings written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1998-01-01 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of high-damping rubber bearings,Ømanufactured by Scougal Rubber Corporation. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Seismic Isolation Energy Dissipation and Active Vibration Control of Structures written by Gian Paolo Cimellaro and published by Springer Nature. This book was released on 2023-01-06 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the proceedings of the 17th World Conference on Seismic Isolation (17WCSI), held in Turin, Italy on September 11-15, 2022. Endorsed by ASSISi Association (Anti-Seismic Systems International Society), the conference discussed state-of-the-art information as well as emerging concepts and innovative applications related to seismic isolation, energy dissipation and active vibration control of structures, resilience and sustainability. The volume covers highly diverse topics, including earthquake-resistant construction, protection from natural and man-made impacts, safety of structures, vulnerability, international standards on structures with seismic isolation, seismic isolation in existing structures and cultural heritage, seismic isolation in high rise buildings, seismic protection of non-structural elements, equipment and statues. The contributions, which are published after a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different specialists.