Download or read book A Guide to Wear Problems and Testing for Industry written by Michael Neale and published by William Andrew. This book was released on 2001-12-31 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine component wear is one of the costliest problems within industry. In fact, a 1997 survey in the UK placed wear costs at 25% of turnover, or approximately $1 billion. In many cases, making design and or material changes can reduce this cost by 50% or more! This handbook reviews component wear, and guides the reader through solutions to wear problems, testing methods for materials and wear mechanisms, and information on wear performance of different materials for components. The bottom line is that it helps to reduce ""the bottom line"" removing risks associated with changes to machinery.This book is based on practical use. It outlines the following practices: reviews of wear mechanisms that occur in various types of machinery and solutions to industrial wear problems; guides to relative wear performance of different component materials; comparison of the wear performance of those materials; reviews of laboratory tests to simulate wear, and selection of appropriate tests; identification of improved materials, and; examination of worn surfaces.
Download or read book Surface Wear written by R. Chattopadhyay and published by ASM International. This book was released on 2001-01-01 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Describes the surface properties controlling the wear processes in different environments, and presents techniques for reducing specific type of wear through modification of surface properties. The author characterizes the energy, morphology, and composition of surfaces, then identifies the mechanisms of wear caused by adhesion, abrasion, erosion, corrosion, and heat. The main section of the book discusses the various surface protection technologies: strain hardening, thermally assisted diffusion processes, hardening by thermal treatment, thin film coatings, and thick film overlays. The final chapters address metal, plastic and ceramic composites that resist wear, and provide a wear diagnosis methodology. Annotation copyrighted by Book News Inc., Portland, OR
Download or read book Wear written by Gwidon W. Stachowiak and published by John Wiley & Sons. This book was released on 2006-08-14 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is emerging from the realm of steam engines and crank-case lubricants and becoming key to vital new technologies such as nanotechnology and MEMS. Wear is an integral part of tribology, and an effective understanding and appreciation of wear is essential in order to achieve the reliable and efficient operation of almost any machine or device. Knowledge in the field has increased considerably over recent years, and continues to expand: this book is intended to stimulate its readers to contribute towards the progress of this fascinating subject that relates to most of the known disciplines in physical science. Wear – Materials, Mechanisms and Practice provides the reader with a unique insight into our current understanding of wear, based on the contributions of numerous internationally acclaimed specialists in the field. Offers a comprehensive review of current knowledge in the field of wear. Discusses latest topics in wear mechanism classification. Includes coverage of a wide variety of materials such as metals, polymers, polymer composites, diamonds, and diamond-like films and ceramics. Discusses the chemo-mechanical linkages that control tribology, providing a more complete treatment of the subject than just the conventional mechanical treatments. Illustrated throughout with carefully compiled diagrams that provide a unique insight into the controlling mechanisms of tribology. The state of the art research on wear and the mechanisms of wear featured will be of interest to post-graduate students and lecturers in engineering, materials science and chemistry. The practical applications discussed will appeal to practitioners across virtually all sectors of engineering and industry including electronic, mechanical and electrical, quality and reliability and design.
Download or read book Wear Analysis for Engineers written by Raymond George Bayer and published by Hnb Publishing. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tribology for Engineers written by J. Paulo Davim and published by Elsevier. This book was released on 2011-01-24 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology for engineers discusses recent research and applications of principles of friction, wear and lubrication, and provides the fundamentals and advances in tribology for modern industry. The book examines tribology with special emphasis on surface topography, wear of materials and lubrication, and includes dedicated coverage on the fundamentals of micro and nanotribology. The book serves as a valuable reference for academics, tribology and materials researchers, mechanical, physics and materials engineers and professionals in related industries with tribology. - Edited and written by highly knowledgeable and well-respected researchers in the field - Examines recent research and applications of friction, wear and lubrication - Highlights advances and future trends in the industry
Download or read book Metals for Biomedical Devices written by Mitsuo Niinomi and published by Elsevier. This book was released on 2010-03-31 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite recent advances in medical devices using other materials, metallic implants are still one of the most commercially significant sectors of the industry. Given the widespread use of metals in medical devices, it is vital that the fundamentals and behaviour of this material are understood. Metals in biomedical devices reviews the latest techniques in metal processing methods and the behaviour of this important material.Initial chapters review the current status and selection of metals for biomedical devices. Chapters in part two discuss the mechanical behaviour, degradation and testing of metals with specific chapters on corrosion, wear testing and biocompatibility of biomaterials. Part three covers the processing of metals for biomedical applications with chapters on such topics as forging metals and alloys, surface treatment, coatings and sterilisation. Chapters in the final section discuss clinical applications of metals such as cardiovascular, orthopaedic and new generation biomaterials.With its distinguished editor and team of expert contributors, Metals for biomedical devices is a standard reference for materials scientists, researchers and engineers working in the medical devices industry and academia. - Reviews the latest techniques in metal processing methods including surface treatment and sterilisation - Examines metal selection for biomedical devices considering biocompatibility of various metals - Assesses mechanical behaviour and testing of metals featuring corrosion, fatigue and wear
Download or read book Plastics Reinforcement and Industrial Applications written by T.R. Crompton and published by CRC Press. This book was released on 2015-08-18 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: When combined with reinforcing agents, plastics can be used for a number of high-temperature applications. Plastics Reinforcement and Industrial Applications provides a detailed discussion on plastics, polymers, and reinforcing agents (including organic and natural biomaterials). Focused specifically on improving the mechanical, thermal, and electr
Download or read book Polymer Tribology written by Sujeet K. Sinha and published by World Scientific. This book was released on 2009 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the new and now-expanding field of friction, wear, and other surface-related mechanical phenomena for polymers. Polymers have been used in various forms such as bulk, films, and composites in applications where their friction, wear resistance, and other surface-related properties have been effectively utilized. There are also many examples in which polymers have performed extremely well, such as in tyres, shoes, brakes, gears, bearings, small moving parts in electronics and MEMS, cosmetics/hair products, and artificial human joints. Around the world, much research is currently being undertaken to develop new polymers, in different forms, for further enhancing tribological performance and for finding novel applications. Keeping in view the importance of tribology of polymers for research and technology as well as the vast literature that is now available in research papers and review articles, this timely book brings together a wealth of research data for an understanding of the basic principles of the subject.
Download or read book Fuels and Lubricants Handbook written by and published by ASTM International. This book was released on with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluoropolymer Additives written by Sina Ebnesajjad and published by William Andrew. This book was released on 2019-04-15 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoropolymer Additives, Second Edition provides practical information on this group of additives, along with their applications and proper and safe handling. Chapters cover how commercial additives have been updated, providing a starting point where readers can begin the process of selection of additives for their own applications. Fully updated sections on applications provide the readers with a step-by-step description of the techniques necessary to select and incorporate these additives in various products. This book is the only practical guide available on the selection and use of fluoropolymer additives. It will help readers optimize existing fluoropolymer applications and implement new initiatives. In recent years, the application of fluoropolymer additives has expanded significantly, with even the meaning of 'fluoropolymer additives' expanding from the relatively narrow definition of PTFE powder fillers to a wide variety of fluoropolymer elastomers used as processing aids for plastics processing techniques in extrusion, injection molding, and film blowing. In addition, fluropolymer additives are being increasingly used in inks, lubricants, and coatings. - Includes essential information and data that enables engineers and materials scientists to realize the full benefits of fluoropolymer additives as processing aids - Written by authors Ebnesajjad and Morgan who take a highly practical approach to the subject that is based on real-world experience and case studies - Updated to include the latest commercial additives and applications information for practicing engineers
Download or read book Engineering Plastics written by T. R Crompton and published by Smithers Rapra. This book was released on 2014-05-28 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generally speaking, engineering plastics are those which are replacing conventional materials such as metals and alloys in general engineering. In addition, the term 'engineering plastic' covers materials that have superior properties which were not particularly available in conventional polymeric materials such as the exceptionally high heat resistance of polyimides and polysulfides. In addition to conventional materials engineering polymers include materials as diverse as polyether ether ketone, polyimide, polyetherimide and polysulfides and polysulfides. Engineering polymers can be reinforced by the inclusion in their formulations of glass fibres, carbon fibres and nanotubes which produce appreciable improvements in mechanical and thermal properties. The book aims to provide a complete coverage of the types of plastics which are now increasingly being used in engineering, in applications as diverse as gears, aircraft body construction, micro-electronics and extreme high temperature applications, steel replacement and artificial hip joints. The book also intends to provide a complete review of the use of polymers in engineering. The mechanical, electrical and thermal properties of polymers are discussed as are other diverse applications such as solvent and detergent resistance, frictional and hardness properties, food packaging applications and gas barrier properties. In addition a very important application is discussed of the resistance of plastics to gamma and other forms of radiation namely their use in nuclear industry, medical applications and food sterilisation. The book will be of interest to those at all levels who are concerned with general engineering, building, automotive, aerospace, electronics, mechanical and nuclear industries. It will also be of interest as a source book to materials scientists, those concerned with the development of new materials and students of engineering and related studies.
Download or read book Performance Characterization of Lubricants written by Abhishek Kumar and published by CRC Press. This book was released on 2024-11-14 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text discusses the fundamentals of lubrication science and technology linking the science concepts to engineering practices. It further explores the performance characterization of lubrication systems by utilizing sophisticated experiments and tests and motivates the readers to develop their conclusions and reach solutions based on modern tools and techniques. This book: Presents the principles of surface and lubricant chemistry, and its implementation to devise engineering solutions for various application-based systems. Discusses viscosity index improvers, tribology of green lubricants, and biolubricants from non-edible oils. Highlights 2D nanomaterials lubricants, biogreases, hydrogel and lubricants for extreme temperature and pressure conditions. Explains lubrication for electrical, biomedical, automobile, marine, turbine and aerospace applications. Covers design considerations, formulations, and compositions of lubricants for high-temperature applications in diverse areas. Explores the simulation, computational, and empirical models to characterize, quantify and mitigate the adverse effects of friction. It is primarily written for senior undergraduate and graduate students, and academic researchers in the fields of mechanical engineering, production engineering, industrial engineering, aerospace engineering, and manufacturing engineering.
Download or read book Materials Characterization written by Naryanaswami (Mohan) Ranganathan and published by CRC Press. This book was released on 2016-01-05 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, which is a result of a coordinated effort by 22 researchers from five different countries, addresses the methods of determining the local and global mechanical properties of a variety of materials: metals, plastics, rubber, and ceramics. The first chapter treats nanoindentation techniques comprehensively. Chapter 2 concerns polymer surfa
Download or read book Shreir s Corrosion written by and published by Elsevier. This book was released on 2009-02-27 with total page 3652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume reference work builds upon the success of past editions of Elsevier’s Corrosion title (by Shreir, Jarman, and Burstein), covering the range of innovations and applications that have emerged in the years since its publication. Developed in partnership with experts from the Corrosion and Protection Centre at the University of Manchester, Shreir’s Corrosion meets the research and productivity needs of engineers, consultants, and researchers alike. Incorporates coverage of all aspects of the corrosion phenomenon, from the science behind corrosion of metallic and non-metallic materials in liquids and gases to the management of corrosion in specific industries and applications Features cutting-edge topics such as medical applications, metal matrix composites, and corrosion modeling Covers the benefits and limitations of techniques from scanning probes to electrochemical noise and impedance spectroscopy
Download or read book Joint EPRI 123HiMAT International Conference on Advances in High Temperature Materials written by J. Shingledecker and published by ASM International. This book was released on 2019-10-01 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings from: EPRI’s 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials
Download or read book Synthesis and Tribological Applications of Hybrid Materials written by Mohammad Jawaid and published by John Wiley & Sons. This book was released on 2018-08-30 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-depth knowledge on tribological applications of hybrid composites Synthesis and Tribological Applications of Hybrid Materials provides a comprehensive overview of tribological properties of hybrid composites. The book offers an understanding of the processes, materials, techniques and mechanisms related to the tribological concepts and includes information on the most recent developments in the field. With contributions from an international panel of experts, the book discusses the synthesis and characterization of hybrid materials, as well as their applications in biotechnological and biomedical fields. The book covers a wide-range of versatile topics such as: Tribological assessment on accelerated aging bones in polymeric condition; Nano fracture and wear testing on natural bones; Tribological behaviour of glass fiber with fillers reinforced hybrid polymer composites and jute/glass hybrid composites; Wear properties of glass fiber hybrid, and acid- and silane-modified CNT filled hybrid glass/kenaf epoxy composites; Hybrid natural fibre composites as a friction material; and much more. This important resource: -Discusses recent advancements in the field of tribology and hybrid materials -Offers a guide for professionals in the fields of materials science, mechanical engineering, biomaterials, chemistry, physics and nanotechnology -Integrates theory, synthesis and properties of nybrid materals as well as their applications -Offers an outlook to the future of this burgeoning technology Written for materials scientists, surface chemists, bioengineers, mechanical engineers, engineering scientists and chemical industry professionals, Synthesis and Tribological Applications of Hybrid Materials is a comprehensive resource that explores the most recent developments in the field.
Download or read book Advances in Materials Technology for Fossil Power Plants written by D. Gandy and J. Shingledecker and published by ASM International. This book was released on 2014-01-01 with total page 1520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference proceedings covering the latest technology developments for fossil fuel power plants, including nickel-based alloys for advanced ultrasupercritical power plants, materials for turbines, oxidation and corrosion, welding and weld performance, new alloys concepts, and creep and general topics.
