Download or read book Quantum Mechanics for Nanostructures written by Vladimir Vasilʹevich Mitin and published by Cambridge University Press. This book was released on 2010-05-20 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook introducing engineers to quantum mechanics and nanostructures, covering the fundamentals and applications to nanoscale materials and nanodevices.
Download or read book Evidence Based Public Health written by Ross C. Brownson and published by Oxford University Press. This book was released on 2010-12-03 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are at least three ways in which a public health program or policy may not reach stated goals for success: 1) Choosing an intervention approach whose effectiveness is not established in the scientific literature; 2) Selecting a potentially effective program or policy yet achieving only weak, incomplete implementation or "reach," thereby failing to attain objectives; 3) Conducting an inadequate or incorrect evaluation that results in a lack of generalizable knowledge on the effectiveness of a program or policy; and 4) Paying inadequate attention to adapting an intervention to the population and context of interest To enhance evidence-based practice, this book addresses all four possibilities and attempts to provide practical guidance on how to choose, carry out, and evaluate evidence-based programs and policies in public health settings. It also begins to address a fifth, overarching need for a highly trained public health workforce. This book deals not only with finding and using scientific evidence, but also with implementation and evaluation of interventions that generate new evidence on effectiveness. Because all these topics are broad and require multi-disciplinary skills and perspectives, each chapter covers the basic issues and provides multiple examples to illustrate important concepts. In addition, each chapter provides links to the diverse literature and selected websites for readers wanting more detailed information. An indispensable volume for professionals, students, and researchers in the public health sciences and preventative medicine, this new and updated edition of Evidence-Based Public Health aims to bridge research and evidence with policies and the practice of public health.
Download or read book Da Capo written by Graziana Lazzarino and published by Heinle & Heinle Publishers. This book was released on 2010 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Seventh Edition of the best-selling intermediate Italian text, DA CAPO, International Edition, reviews and expands upon all aspects of Italian grammar while providing authentic learning experiences (including new song and video activities) that provide students with engaging ways to connect with Italians and Italian culture. Following the guidelines established by the National Standards for Foreign Language Learning, DA CAPO develops Italian language proficiency through varied features that accommodate a variety of teaching styles and goals. The Seventh Edition emphasizes a well-rounded approach to intermediate Italian, focusing on balanced acquisition of the four language skills within an updated cultural framework.
Download or read book Principles of Bioinorganic Chemistry written by Stephen J. Lippard and published by University Science Books. This book was released on 1994 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of unnatural metals - which have been introduced into human biology as diagnostic probes and drugs - is another active area of tremendous medical significance.
Download or read book Nanotechnology Principles and Practices written by Sulabha K. Kulkarni and published by Springer. This book was released on 2014-11-03 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the rapid advances in the field, this book offers an up-to-date introduction to nanomaterials and nanotechnology. Though condensed into a relatively small volume, it spans the whole range of multidisciplinary topics related to nanotechnology. Starting with the basic concepts of quantum mechanics and solid state physics, it presents both physical and chemical synthetic methods, as well as analytical techniques for studying nanostructures. The size-specific properties of nanomaterials, such as their thermal, mechanical, optical and magnetic characteristics, are discussed in detail. The book goes on to illustrate the various applications of nanomaterials in electronics, optoelectronics, cosmetics, energy, textiles and the medical field and discusses the environmental impact of these technologies. Many new areas, materials and effects are then introduced, including spintronics, soft lithography, metamaterials, the lotus effect, the Gecko effect and graphene. The book also explains the functional principles of essential techniques, such as scanning tunneling microscopy (STM), atomic force microscopy (AFM), scanning near field optical microscopy (SNOM), Raman spectroscopy and photoelectron microscopy. In closing, Chapter 14, ‘Practicals’, provides a helpful guide to setting up and conducting inexpensive nanotechnology experiments in teaching laboratories.
Download or read book Advanced Respiratory Care written by Robert M. Kacmarek and published by . This book was released on 2000-08-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A continuation of the Advanced Ventilator Management program, these cutting-edge programs combine tutorial and simulation-style questions on advanced respiratory therapy topics. Answers with rationales are included. Self-assessment tests provide randomly generated questions so users can test what they've learned. Also included is a glossary of hyperlinked terms and a bibliography with current references and suggested readings.
Download or read book The Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared as a textbook complete with problems after each chapter, specifically intended for classroom use in universities.
Download or read book Nanofabrication written by Zheng Cui and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the most up-to-date information and development in the Nanofabrication area. It presents a one-stop description at the introduction level on most of the technologies that have been developed which are capable of making structures below 100nm. Principles of each technology are introduced and illustrated with minimum mathematics involved. The book serves as a practical guide and first hand reference for those working in nanostructure fabrication.
Download or read book Laser Cladding of Metals written by Pasquale Cavaliere and published by Springer Nature. This book was released on 2020-11-05 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser cladding is an additive manufacturing technology capable of producing coatings due to the surface fusion of metals. The selected powder is fed into a focused laser beam to be melted and deposited as coating. This allows to apply material in a selected way onto those required sections of complex components. The process main properties are the production of a perfect metallurgically bonded and fully dense coatings; the minimal heat affected zone and low dilution between the substrate and filler material resulting in functional coatings that perform at reduced thickness, so fewer layers are applied; fine, homogeneous microstructure resulting from the rapid solidification rate that promotes wear resistance of carbide coatings; near net-shape weld build-up requires little finishing effort; extended weldability of sensitive materials like carbon-rich steels or nickel-based superalloys that are difficult or even impossible to weld using conventional welding processes; post-weld heat treatment is often eliminated as the small heat affected zone minimizes component stress; excellent process stability and reproducibility because it is numerical controlled welding process. The typical applications are the dimensional restoration; the wear and corrosion protection; additive manufacturing. The wide range of materials that can be deposited and its suitability for treating small areas make laser cladding particularly appropriate to tailor surface properties to local service requirements and it opens up a new perspective for surface engineered materials. The main key aspect to be scientifically and technologically explored are the type of laser; the powders properties; the processing parameters; the consequent microstructural and mechanical properties of the processed material; the capability of fabrication of prototypes to rapid tooling and rapid manufacturing. Distills critical concepts, methods, and applications from leading full-length chapters, along with the authors’s own deep understanding of the material taught, into a concise yet rigorous graduate and advanced undergraduate text; Reinforces concepts covered with detailed solutions to illuminating and challenging industrial applications; Discusses current and future applications of laser cladding in additive manufacturing.
Download or read book Nanochemistry written by Geoffrey A Ozin and published by Royal Society of Chemistry. This book was released on 2023-01-17 with total page 875 pages. Available in PDF, EPUB and Kindle. Book excerpt: International interest in nanoscience research has flourished in recent years, as it becomes an integral part in the development of future technologies. The diverse, interdisciplinary nature of nanoscience means effective communication between disciplines is pivotal in the successful utilization of the science. Nanochemistry: A Chemical Approach to Nanomaterials is the first textbook for teaching nanochemistry and adopts an interdisciplinary and comprehensive approach to the subject. It presents a basic chemical strategy for making nanomaterials and describes some of the principles of materials self-assembly over 'all' scales. It demonstrates how nanometre and micrometre scale building blocks (with a wide range of shapes, compositions and surface functionalities) can be coerced through chemistry to organize spontaneously into unprecedented structures, which can serve as tailored functional materials. Suggestions of new ways to tackle research problems and speculations on how to think about assembling the future of nanotechnology are given. Primarily designed for teaching, this book will appeal to graduate and advanced undergraduate students. It is well illustrated with graphical representations of the structure and form of nanomaterials and contains problem sets as well as other pedagogical features such as further reading, case studies and a comprehensive bibliography.
Download or read book PMP Exam Prep written by Rita Mulcahy and published by Rmc Publications Incorporated. This book was released on 2013 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biometry written by Robert R. Sokal and published by Macmillan. This book was released on 1995 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers students with little background in statistical analysis an introduction to a variety of statistical concepts and methods. In addition to the incorporation of computer calculation, this new edition expands on a number of important topics, including the revised Kolmogrov-Smirnov test.
Download or read book Handbook of Online Learning written by Kjell Erik Rudestam and published by SAGE. This book was released on 2002-02-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for academic coursework and corporate training programs using the Internet and computer-mediated communication networks increases daily. The development and implementation of these new programs requires that traditional teaching techniques and course work be significantly reworked. This handbook consists of 20 chapters authored by experts in the field of teaching in the online environment to adult students enrolled in graduate university degree programs, corporate training programs, and continuing education courses. The book is organized to first lay a conceptual and theoretical foundation for implementing any online learning program. Topics such as psychological and group dynamics, ethical issues, and curriculum design are covered in this section. Following the establishment of this essential framework are separate sections devoted to the practical issues specific to developing a program in either an academic or corporate environment. Whether building an online learning program from the ground up or making adjustments to improve the effectiveness of an existing program, this book is an invaluable resource.--From Amazon.
Download or read book Fabrication Engineering at the Micro and Nanoscale written by Stephen A. Campbell and published by OUP USA. This book was released on 2008-01-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for advanced undergraduate or first-year graduate courses in semiconductor or microelectronic fabrication, the third edition of Fabrication Engineering at the Micro and Nanoscale provides a thorough and accessible introduction to all fields of micro and nano fabrication.
Download or read book Pseudo English written by Cristiano Furiassi and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-03-10 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on how English, through false Anglicisms, influences several European languages, including Italian, Spanish, French, German, Danish and Norwegian. Studies on false Gallicisms are also included, thus showing how English may be affected by false borrowings.
Download or read book Coastal Plankton written by Otto Larink and published by . This book was released on 2011-01 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Libraries Serving Dialogue written by Odile Dupont and published by Walter de Gruyter GmbH & Co KG. This book was released on 2014-08-25 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IFLA Religious Libraries in Dialogue Special Interest Group is dedicated to libraries serving as places of dialogue between cultures through a better knowledge of religions. This book based on experiences of libraries serving interreligious dialogue, presents themes like library tools serving dialogue between cultures, collections dialoguing, children and young adults dialoguing beyond borders, story telling as dialog, librarians serving interreligious dialogue.
