Download or read book Evolution of Thin Film and Surface Structure and Morphology Volume 355 written by B. G. Demczyk and published by . This book was released on 1995-07-18 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EMC 2008 written by Silvia Richter and published by Springer Science & Business Media. This book was released on 2008-09-20 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the14th European Microscopy Congress, held in Aachen, Germany, 1-5 September 2008. Jointly organised by the European Microscopy Society (EMS), the German Society for Electron Microscopy (DGE) and the local microscopists from RWTH Aachen University and the Research Centre Jülich, the congress brings together scientists from Europe and from all over the world. The scientific programme covers all recent developments in the three major areas of instrumentation and methods, materials science and life science.
Download or read book Advances in Superconductivity X written by Kozo Osamura and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 1478 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium on Superconductivity, which has been held annu ally since 1988, is a forum for presenting the most up-to-date information about a broad range of research and development in superconductivity, from funda mental aspects to applications. More than 10 years have passed since the discovery of oxide superconductors and since various developments of applications began. It may be said that the prospects for application of oxide superconductors recently have opened up. Great progress has been made toward practical use, for example, of the flywheel, which uses bulk materials, and the high-performance cryo-cooled magnet made of bismuth wire. These were the results of persistent efforts to develop materials from the viewpoint of materials science and engineering. Also important is the progress in comprehensive understanding of high temperature superconductivity. Unique electronic properties of cuprates such as the non-Fermi liquid normal state, spin-charge separation, spin gap, and d-wave symmetry were discussed at the symposium, as were the unique electromagnetic properties resulting from the low dimensionality of cuprates. In the field of new superconductors, many exotic materials have been discovered since 1986. A decade of work with cuprate superconductors is reviewed in this proceedings, and several of the newest materials are presented. These papers will be instructive for many researchers and for students who are to enter this field.
Download or read book High Temperature Superconductor Thin Films growth Mechanisms interfaces multilayers written by H.-U. Habermeier and published by Elsevier Science & Technology. This book was released on 1997 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The four day EMRS Spring Meeting in Strasbourg, France (June 4 -7 1996) Symposium on High Temperature Superconductor Thin Films: Growth Mechanisms - Interfaces - Multilayers was held in conjunction with the Third Workshop in Europe. The benefit of including the Workshop into the Symposium was the advantage of bringing in an additional far larger and disciplinarily more diverse audience and through the organization of the workshop receiving invited and contributed lectures as well as posters which was supplemental to the main Symposium. The Symposium focused on the specific topics of growth interfaces and multilayers and highlighted the continuing need for there to be active interplay between chemists designing new precursor molecules and depositing thin films, and engineers applying HTS materials with deficiencies and limitations to commercially oriented devices.The majority of papers presented at the Symposium are included in these pro
Download or read book Polycrystalline Thin Films Structure Texture Properties and Applications written by and published by . This book was released on 1994 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Thin Films and Nanostructures with Ion Beams written by Emile Knystautas and published by CRC Press. This book was released on 2018-10-03 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: While ion-beam techniques have been used to create thin films in the semiconductor industry for several decades, these methods have been too costly for other surface treatment applications. However, as manufacturing devices become increasingly smaller, the use of a directed-energy ion beam is finding novel industrial applications that require the custom tailoring of new materials and devices, including magnetic storage devices, photonics, opto-electronics, and molecular transport. Engineering Thin Films and Nanostructures with Ion Beams offers a thorough narrative of the recent advances that make this technology relevant to current and future applications. Featuring internationally recognized researchers, the book compiles their expertise in a multidimensional source that: Highlights the mechanisms and visual evidence of the effects of single-ion impacts on metallic surfaces Considers how ion-beam techniques can help achieve higher disk-drive densities Introduces gas-cluster ion-beam technology and reviews its precedents Explains how ion beams are used to aggregate metals and semiconductors into nanoclusters with nonlinear optical properties Addresses current challenges in building equipment needed to produce nanostructures in an industrial setting Examines the combination of ion-beam techniques, particularly with physical vapor deposition Delineates the fabrication of nanopillars, nanoflowers, and interconnected nanochannels in three dimensions by using atomic shadowing techniques Illustrates the production of nanopores of varying dimensions in polymer films, alloys, and superconductors using ion-beam irradiation Shows how fingerprints can be made more reliable as forensic evidence by recoil-mixing them into the substrate using ion beams From the basics of the ion-beam modification of materials to state-of-the-art applications, Engineering Th
Download or read book Ceramic Abstracts written by and published by . This book was released on 1999 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser assisted Fabrication of Thin Films and Microstructures written by Ian W. Boyd and published by . This book was released on 1994 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Superconducting Materials written by David A. Cardwell and published by CRC Press. This book was released on 2003 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of High Temperature Superconductivity and the increasing reliability of fabrication techniques, superconductor technology has moved firmly into the mainstream of academic and industrial research. There is currently no single source of practical information giving guidance on which technique to use for any particular category of superconductor. An increasing number of materials scientists and electrical engineers require easy access to practical information, sensible advice and guidance on 'best-practice' and reliable, proven fabrication and characterisation techniques.The Handbook will be the definitive collection of material describing techniques for the fabrication and analysis of superconducting materials. In addition to the descriptions of techniques, authoritative discussions written by leading researchers will give guidance on the most appropriate technique for a particular situation.Characterisation and measurement techniques will form an important part of the Handbook, providing researchers with a standard reference for experimental techniques. The tutorial style description of these techniques makes the Handbook particularly suitable for use by graduate students.The Handbook will be supported by a comprehensive web site which will be updated with new data as it emerges.The Handbook has six main sections: -- Fundamentals of Superconductivity - characteristic properties, elementary theory, critical current of type II superconductors-- Processing - bulk materials, wires and tapes, thick and think films, contact techniques-- Characterisation Techniques - structure/microstructure, measurement and interpretation of electromagnetic properties,measurement of physics properties-- Materials - characteristic properties of low and high Tc materials-- Applications - high current applications, trapped flux devices, high frequency devices, josephson junction devic
Download or read book Multiferroic Materials written by Junling Wang and published by CRC Press. This book was released on 2016-10-14 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: "a very detailed book on multiferroics that will be useful for PhD students and researchers interested in this emerging field of materials science" —Dr. Wilfrid Prellier, Research Director, CNRS, Caen, France Multiferroics has emerged as one of the hottest topics in solid state physics in this millennium. The coexistence of multiple ferroic/antiferroic properties makes them useful both for fundamental studies and practical applications such as revolutionary new memory technologies and next-generation spintronics devices. This book provides an historical introduction to the field, followed by a summary of recent progress in single-phase multiferroics (type-I and type-II), multiferroic composites (bulk and nano composites), and emerging areas such as domain walls and vortices. Each chapter addresses potential technological implications. There is also a section dedicated to theoretical approaches, both phenomenological and first-principles calculations.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1993-04 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Beam Solid Interactions for Materials Synthesis and Characterization Volume 354 written by Dale C. Jacobson and published by . This book was released on 1995-11-20 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the title symposium, held at the 1994 MRS Fall Meeting in Boston, 28 November-2 December 1994. Selected papers that were presented in both oral and poster sessions are divided into six topical groups: ion beam processing; defects and diffusion; ion-beam modification of polymers; analysis and characterization; sputtering; and laser-assisted and induced processes. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2006 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Development in Energy Conversion Systems written by Sunday Olayinka Oyedepo and published by Frontiers Media SA. This book was released on 2024-03-15 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this industrial and technological age, energy plays a principal role in sustainable development. This is connected to issues regarding availability, production processes, utilization, and environmental impact. Due to the increased rate of population growth, the energy demand in the entire world is getting to the level that it may not be sustained in the nearest future if drastic action is not taken to address the situation, especially from research and development perspectives. "None of the millennium development goals (MDGs) can be completed without considerable improvements in the quality and quantity of energy services in developing countries," according to the United Nations Development Programme (UNDP). Based on this fact, UNDP is making efforts, especially in developing countries to ensure that people have access to sustainable sources of clean, reliable, and affordable energy since every aspect of human development is highly impacted by this vital resource.
