Download or read book Ground Anchors and Anchored Structures written by Petros P. Xanthakos and published by John Wiley & Sons. This book was released on 1991-09-03 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treating anchorages as a direct application of the laws of statics and the theories governing the transfer of load, this book focuses on designs that are safe and reasonably priced. It is divided into two parts. Following a general introduction in the first chapter, Part One goes on to explore anchor systems, components, installation and construction details. Presents special anchor systems such as extractable, compression-type, multibell, and regroutable anchors. Analyzes the transfer of load and its relation to failure modes and anchor load capacity; deals with design considerations; covers mechanisms and types of corrosion; and details anchor stressing, testing programs, and evaluation standards. Part Two considers uses and applications and design aspects of anchored structures; presents design examples of practical value and reasonable simplicity; and incorporates examples and case histories.
Download or read book Ground Anchors and Anchored Structures written by and published by . This book was released on 1991 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ground Anchorages and Anchored Structures written by Institution of Civil Engineers (Great Britain) and published by Thomas Telford. This book was released on 1997-04-10 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of the first major international conference for over twenty years on the state-of-the-art of ground anchorage technology. Practical issues relating to construction and installation of anchorages are considered in a series of examples of engineering projects from around the world.
Download or read book Ground Anchors and Anchored Systems written by Federal Highway Administration and published by . This book was released on 2006-08-01 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-practice information on the design and installation of cement-grouted ground anchors and anchored systems for highway applications. The anchored systems discussed include flexible anchored walls, slopes supported using ground anchors, landslide stabilization systems, and structures that incorporate tiedown anchors. This book draws extensively in describing issues such as subsurface investigation and laboratory testing, basic anchoring principles, ground anchor load testing, and inspection of construction materials and methods used for anchored systems. This book provides detailed information on design analyses for ground anchored systems. Topics discussed include selection of design earth pressures, ground anchor design, design of corrosion protection system for ground anchors, design of wall components to resist lateral and vertical loads, evaluation of overall anchored system stability, and seismic design of anchored systems. Also included in this book are two detailed design examples and technical specifications for ground anchors and for anchored walls.
Download or read book Design and Construction of Soil Anchor Plates written by Hamed Niroumand and published by Butterworth-Heinemann. This book was released on 2016-08-11 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primarily designed and constructed to resist outwardly directed loads imposed on the foundation of a structure, anchor plates play an important role in the design of structures (including seawalls, transmission towers, tunnels, buried pipelines, and retaining walls). Design and Construction of Soil Anchor Plates focuses on the various theories based on the design and construction techniques of anchor plates in soil mechanics. The focus of this reference is on design methods, theories, and procedures for constructing permanent or temporary ground anchors and anchored systems. Topics include: General Requirements of Vertical Anchor Plates and Design Criteria, Estimation of Ultimate Capacity in Vertical Anchor Plates, General Requirements of Vertical Anchor Plates and Design Criteria, Type and Length of Inclined Anchor Plates, Early Theories on Anchor Plates in Multi-Layers Soil, and Basic Theories on Passive Pressure in Vertical Anchor Plates. With this reference, researchers and designers will find a valuable guide to the various theories, techniques, and equations for anchor design. Basic theories on passive pressure in vertical anchor plates Estimation of ultimate capacity in vertical anchor plates Uplift capacity for shallow anchor plates Requirements of vertical anchor plates and design criteria Type and length of inclined anchor plates
Download or read book Foundations in Tension written by Thomas H. Hanna and published by . This book was released on 1982 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthquake Induced Landslides written by Keizo Ugai and published by Springer Science & Business Media. This book was released on 2012-10-25 with total page 955 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismicity is a major trigger for landslides with often devastating effects. The Japan Landslide Society (JLS) therefore organized a meeting fully dedicated to the research area of earthquake induced landslides. The symposium covers all aspects of earthquake-induced landslides including the phenomena occurred in manmade embankments as well as in natural slopes in mountainous areas. In this comprehensive volume on landslide science the JLS presents the Proceedings of this First International Symposium on Earthquake-Induced Landslides, held in November 2012 in Kiryu, Japan.
Download or read book Foundation Engineering Handbook written by Hsai-Yang Fang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than ten years have passed since the first edition was published. During that period there have been a substantial number of changes in geotechnical engineering, especially in the applications of foundation engineering. As the world population increases, more land is needed and many soil deposits previously deemed unsuitable for residential housing or other construction projects are now being used. Such areas include problematic soil regions, mining subsidence areas, and sanitary landfills. To overcome the problems associated with these natural or man-made soil deposits, new and improved methods of analysis, design, and implementation are needed in foundation construction. As society develops and living standards rise, tall buildings, transportation facilities, and industrial complexes are increasingly being built. Because of the heavy design loads and the complicated environments, the traditional design concepts, construction materials, methods, and equipment also need improvement. Further, recent energy and material shortages have caused additional burdens on the engineering profession and brought about the need to seek alternative or cost-saving methods for foundation design and construction.
Download or read book Soil and Rock Anchors for Mobile Homes written by William D. Kovacs and published by . This book was released on 1979 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earth Anchors written by B.M. Das and published by Elsevier. This book was released on 2012-12-02 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anchors are primarily used in the construction of foundations of earth-supported and earth-retaining structures. The anchors are used in construction to transmit the outwardly-directed load to soil at a greater depth and/or farther from the structure. Although earth anchors have been used in practice for several hundred years, proper theoretical developments for purposes of modern engineering design have taken place only during the past twenty years or so. This book summarizes most of the theoretical and experimental works directed toward the ultimate and allowable holding capacity of earth anchors. The book contains six chapters with detailed discussions on horizontal, vertical and inclined anchor plates, helical anchors, and anchor piles. Discussions on the failure mechanism in soil located around the anchor, as well as various theories to calculate the ultimate and allowable loads, are presented. Laboratory and field test results which are required to supplement and verify the theories have also been included. This book is of interest to consulting engineers in geotechnical engineering, as well as geotechnical engineering researchers and engineering libraries.
Download or read book Earth Anchors written by Braja M. Das and published by J. Ross Publishing. This book was released on 2013-05-22 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anchors are primarily used in the construction of foundations of earth-supported and earth-retaining structures. The fundamental reason for using earth anchors in construction is to transmit the outwardly directed load to the soil at a greater depth and/or farther away from the structure. Although earth anchors have been used in practice for several hundred years, proper theoretical developments for purposes of modern engineering designs have taken place only during the past 40 to 45 years. This book summarizes most theoretical and experimental works directed toward the development of proper relationships for ultimate and allowable holding capacity of earth anchors. J. Ross Publishing offers a supplemental download — A customizable PowerPoint instructional slide presentation prepared by the authors that complements the material covered in the book, chapter-by-chapter.
Download or read book Recommendations for the design and construction of prestressed concrete ground anchors written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1982-05-01 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Engineering Handbook Procedures written by Ulrich Smoltczyk and published by John Wiley & Sons. This book was released on 2003-03-14 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of the Handbook covers the geotechnical procedures used in manufacturing anchors and piles as well as for improving or underpinning foundations, securing existing constructions, controlling ground water, excavating rocks and earth works. It also treats such specialist areas as the use of geotextiles and seeding.
Download or read book Design and construction of prestressed ground anchorages written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1996-04-01 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Instrumentation for Monitoring Field Performance written by John Dunnicliff and published by John Wiley & Sons. This book was released on 1993-10-06 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on the subject written by a practitioner forpractitioners. Geotechnical Instrumentation for Monitoring FieldPerformance Geotechnical Instrumentation for Monitoring FieldPerformance goes far beyond a mere summary of the technicalliterature and manufacturers’ brochures: it guides readersthrough the entire geotechnical instrumentation process, showingthem when to monitor safety and performance, and how to do it well.This comprehensive guide: * Describes the critical steps of planning monitoring programsusing geotechnical instrumentation, including what benefits can beachieved and how construction specifications should bewritten * Describes and evaluates monitoring methods and recommendsinstruments for monitoring groundwater pressure, deformations,total stress in soil, stress change in rock, temperature, and loadand strain in structural members * Offers detailed practical guidelines on instrument calibrations,installation and maintenance, and on the collection, processing,and interpretation of instrumentation data * Describes the role of geotechnical instrumentation during theconstruction and operation phases of civil engineering projects,including braced excavations, embankments on soft ground,embankment dams, excavated and natural slopes, undergroundexcavations, driving piles, and drilled shafts * Provides guidelines throughout the book on the best practices
Download or read book Proceedings of the 15th European Conference on Soil Mechanics and Geotechnical Engineering written by A. Anagnostopoulos and published by IOS Press. This book was released on 2013-03-21 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication contains the papers presented at the 15th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE), held in Athens, Greece. Considerable progress has been made in recent decades in understanding the engineering behavior of those hard soils and weak rocks that clearly fall into either the field of soil or of rock mechanics, and there have been important developments in design and construction methods to cope with them. Progress would be even more desirable, however, for those materials which fall into the ‘grey’ area between soils and rocks. They present particular challenges due to their diversity, the difficulties and problems arising in their identification and classification, their sampling and testing and in the establishment of suitable models to adequately describe their behavior. The publication aims to provide an updated overview of the existing worldwide knowledge of the geological features, engineering properties and behavior of such hard soils and weak rocks, with particular reference to the design and construction methods and problems associated with these materials. Part 4 was published post-conference and includes Conference Reports.
Download or read book Recommendations on Excavations written by Deutsche Gesellschaft für Geotechnik and published by John Wiley & Sons. This book was released on 2009-02-05 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of these recommendations is to harmonize and further develop the methods, according to which excavations are prepared, calculated and carried out. Since 1980, these have been drawn up by the working group "Excavations" at the German Geotechnical Society (Deutsche Gesellschaft fur Geotechnik DGGT) and are similar to a set of standards. They help to simplify analysis of excavation enclosures, to unify load approaches and analysis procedures, to guarantee the stability and serviceability of the excavation structure and its individual components, and to find out an economic design of the excavation structure. For this new edition, all recommendations have been reworked in accordance with EN 1997-1 (Eurocode 7) and DIN 1054-1. In addition, new recommendations on the use of the modulus of subgrade reaction method and the finite element method (FEM), as well as a new chapter on excavations in soft soils, have been added.
