Download or read book Graphene written by Mujtaba Ikram and published by BoD – Books on Demand. This book was released on 2023-02-15 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is considered as a miracle material for scientists and engineers owing to its outstanding physical properties. Graphene and its nanocomposites are promising multifunctional materials with improved tensile strength and elastic modulus. graphene nanocomposites may have a wide range of potential applications due to their outstanding properties and the low cost of graphene. Because graphene composites have a controllable porous structure, a large surface area, high conductivity, high-temperature stability, excellent anti-corrosion properties, and composite compatibility, they can be used in energy storage as electrocatalysts, electro-conductive additives, intercalation hosts, and an ideal substrate for active materials. Shortly, graphene will be a base for the next generation’s scientific revolution.
Download or read book Graphene Oxide in Environmental Remediation Process written by Flavio Pendolino and published by Springer. This book was released on 2017-06-24 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the remediation process using graphene oxide as removal agent from a chemical point of view. State of the art, properties of graphene oxide and its preparation methods are reported in the introduction. Environmental issues and regulations are presented in view of applying graphene oxide dispersion to the purification of aqueous medium, especially for industrial wastewater. The remediation process, for removal organic molecules, inorganic/metallic ions, covers the last part of the book. Future prospective for graphene oxide in the environmental remediation approach is commented.
Download or read book Deterioration and Protection of Sustainable Biomaterials written by Tor P. Schultz and published by ACS Symposium. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood and other structural lignocellulose biomaterials are renewable resources that provide sustainable products that require considerably less energy to manufacture into useable products than other alternatives produced from nonrenewable resources. However, these materials are readily biodegradable and as such must be protected if they are to be used in adverse environments. Consequently, their protection through chemical and nonchemical means plays a vital role in the satisfactory utilization of many products. This publication represents the third ACS book by the three co-editors in a series addressing scientific and practical aspects of biodeterioration and protection of lignocellulose materials. The objective of this third book diverges to some extent from the prior texts, in that it provides an overall view of our current understanding of the microbial and thermal degradation of plant biomass along with new developments in the rapidly changing field of wood protection. The latter is particularly important in light of dramatic changes in copper-based wood preservative systems that are used extensively to treat wood for residential construction, and in the commercial development of lignocellulose modification processes that protect bio-based materials without the addition of biocides. These changes, along with an update on new organic wood preservative systems, factors influencing wood biodeterioration above ground and in soil contact, wood treatment processes, registration and approval processes, applications of molecular biology in wood protection research, and the conversion of biomass into high value carbon products and worldwide trends in wood protection, are covered in this latest ACS book. The individual chapters were authored by a world-class group of academic and industrial scientists in order to provide a state-of-the-art review and global perspective of this rapidly changing field and reviewed by internationally recognized scientist
Download or read book Handbook of Advanced Biomass Materials for Environmental Remediation written by Sabu Thomas and published by Springer Nature. This book was released on with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Agri Waste and Microbes for Production of Sustainable Nanomaterials written by Kamel A. Abd-Elsalam and published by Elsevier. This book was released on 2021-10-10 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agri-Waste and Microbes for Production of Sustainable Nanomaterials assesses the most recent trends used to produce bionanomaterials from agricultural waste and microorganisms. The book covers the green synthesis of various nanomaterials using microorganisms and agricultural waste, including the synthesis and characterization of green nanomaterials, the production of nanomaterials from agri-waste, including metallic, copper, silica, cellulose, nanopolymers and nano/micro plastics, and biological methods such as agricultural and microbial synthesis of metallic/metal oxide, magnetic, silver, copper, nanomaterials and nanonutrients. This is an important reference source for plant scientists, materials scientists and environmental scientists who want to understand this new generation of sustainable nanomaterials. The synthesis of nanocellulose materials from agri-wastes is an emerging alternative for waste treatment methods, developing new biosensors and antimicrobial agents. Silicon nanoparticles are an additional ingredient for the improvement of crop yields. With recent advances in nanomaterials synthesis performance and the discovery of their biomedical, environmental and agricultural applications, it is hoped that the implementation of these methods will be used at large-scale for industrial applications in different sectors. - Highlights recent methods to produce bionanomaterials from agricultural waste and microorganisms - Explores the use of agri-waste in environmental and agricultural applications - Assesses the major challenges for using agri-waste to create eco-friendly nanomaterials at large scale
Download or read book Solid Waste Based Materials for Environmental Remediation written by Guanyi Chen and published by CRC Press. This book was released on 2024-11-21 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a multifaceted examination of solid waste management methods, the preparation, properties, and application of solid waste materials in the remediation of various environmental media, as well as the combination of solid waste materials and artificial intelligence. Based on the latest research results and cutting-edge technologies from around the world, the contributors combine the design principles of solid waste materials with application examples, including a complete system, clear routes, and illustrations. They integrate the idea of ecological civilization, the concept of sustainable development, and engineering innovation thinking, providing a reliable reference for resource recycling and contributing to global low-carbon emission. The book is suitable for teachers and students, as well as researchers, industrial technicians, and managers involved in solid waste resources and environmental remediation.
Download or read book Graphene written by Wonbong Choi and published by CRC Press. This book was released on 2016-04-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the late 20th century, graphene-a one-atom-thick planar sheet of sp2-bonded carbon atoms densely packed in a honeycomb crystal lattice-has garnered appreciable attention as a potential next-generation electronic material due to its exceptional properties. These properties include high current density, ballistic transport, chemical inertness,
Download or read book Biomass Based Functional Carbon Nanostructures for Supercapacitors written by Santosh K. Tiwari and published by Springer Nature. This book was released on 2023-04-27 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a widespread description of the synthesis and characterization of biomass-based carbon nanostructures. It also covers the vital applications of these materials in supercapacitors and for next-generation energy storage devices. It describes the common design procedures, advantages and disadvantages of biomass-based carbon nanostructures and offers novel visions into the forthcoming directions. In addition, this book will provide new updates about the effect of doping and structural twist on the electrochemical performance of electrode materials derived from biomass sources. The book will be useful for beginners, researchers, and professionals working in the area of carbon nanomaterials and their applications in energy storage devices.
Download or read book Chipless RFID Sensors written by Nemai Chandra Karmakar and published by John Wiley & Sons. This book was released on 2016-02-23 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic treatment of the design and fabrication of chipless RFID sensors This book presents various sensing techniques incorporated into chipless RFID systems. The book is divided into five main sections: Introduction to Chipless RFID Sensors; RFID Sensor Design; Smart Materials; Fabrication, Integration and Testing; and Applications of Chipless RFID Sensors. After a comprehensive review of conventional RFID sensors, the book presents various passive microwave circuit designs to achieve compact, high data density and highly sensitive tag sensors for a number of real-world ubiquitous sensing applications. The book reviews the application of smart materials for microwave sensing and provides an overview of various micro- and nano-fabrication techniques with the potential to be used in the development of chipless RFID sensors. The authors also explore a chipless RFID reader design capable of reading data ID and sensory information from the chipless RFID sensors presented in the book. The unique features of the book are: Evaluating new chipless RFID sensor design that allow non-invasive PD detection and localization, real-time environment monitoring, and temperature threshold detection and humidity Providing a classification of smart materials based on sensing physical parameters (i.e. humidity, temperature, pH, gas, strain, light, etc.) Discussing innovative micro- and nano-fabrication processes including printing suitable for chipless RFID sensors Presenting a detailed case study on various real-world applications including retail, pharmaceutical, logistics, power, and construction industries Chipless RFID Sensors is primarily written for researchers in the field of RF sensors but can serve as supplementary reading for graduate students and professors in electrical engineering and wireless communications.
Download or read book Introduction to Graphene Based Nanomaterials written by Luis E. F. Foa Torres and published by Cambridge University Press. This book was released on 2014-01-23 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed primer describing the most effective theoretical and computational methods and tools for simulating graphene-based systems.
Download or read book Graphene from Natural Sources written by Amir Al-Ahmed and published by CRC Press. This book was released on 2022-07-18 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the synthesis of graphene obtained from different natural raw materials and waste products as a low-cost, environmentally friendly alternative that delivers a quality final product. Expert researchers review potential sources of natural raw materials and waste products, methods or characterization, graphene synthesis considerations, and important applications. FEATURES Explores the different approaches to the synthesis of graphene oxide (GO) and reduced graphene oxide (rGO) from natural and industrial carbonaceous wastes Outlines the modification and characterization methods of GO and rGO Addresses the characterization methods of GO and rGO Details applications of GO and rGO created from natural sources Graphene is a multidisciplinary material with applications in almost every sector of science and engineering. Graphene from Natural Sources: Synthesis, Characterization, and Applications is a noteworthy reference for material scientists and engineers in academia and industry interested in reducing costs and employing green synthesis methods in their work.
Download or read book Graphene Extraction from Waste written by Ajeet Kumar Srivastav and published by Woodhead Publishing. This book was released on 2023-06-17 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene Extraction from Waste: A Sustainable Synthesis Approach for Graphene and its Derivatives introduces readers to strategies of graphene extraction from waste, an important advance in graphene material development to support the low-cost and large-scale production of this valuable material. The book compares the various green synthesis routes for graphene materials and its derivatives, with a view on environmental consequences, cost-effectiveness, scalability, possible health hazards and toxicity. Other sections discuss different categories of waste, such as plastic waste, agricultural waste and household waste and the specific considerations of deriving graphene from these sources.Throughout the book, attention is paid to the potential applications of graphene-derived from waste, including challenges and emerging strategies. The book is suitable for researchers and practitioners in research and development in industry who work in the disciplines of materials science and engineering, green chemistry and sustainability. - Reviews the latest advances in sustainable approaches for the extraction of graphene from common sources of waste - Discusses waste management strategies for plastics, household waste, agricultural waste, and their treatment for graphene extraction - Provides the most relevant green synthesis methods for graphene and its derivatives, considering cost, scalability and environmental and health impact
Download or read book The 2 Dimensional World of Graphene written by Virat Khanna and published by Bentham Science Publishers. This book was released on 2024-08-08 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2-Dimensional World of Graphene explores a wide range of graphene applications, capturing current research and understanding about the material while also offering a glimpse into the exciting possibilities that lie ahead. It compiles 10 edited reviews contributed by experts in chemistry. The book begins with a comparison of short-chain dyad graphene oxide and graphene quantum dot nanocomposites, highlighting their role in renewable energy. The introductory chapter is followed by reviews on graphene applications forensics, water purification, green synthesis from agricultural waste, energy storage and conversion, reliability engineering and advanced material fabrication. Each chapter includes structured sections, detailed references and a summary for a broad readership. Contributors have included information on structures and relevant methodology where appropriate for the range of applications highlighted. The 2-Dimensional World of Graphene is an essential primer on applications of graphene and its derivatives.
Download or read book Unitarian Christianity and Other Essays written by William Ellery Channing and published by . This book was released on 1957 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Biomass Valorization for Industrial Applications written by Shahid ul-Islam and published by John Wiley & Sons. This book was released on 2022-01-05 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: HANDBOOK of BIOMASS VALORIZATION for INDUSTRIAL APPLICATIONS The handbook provides a comprehensive view of cutting-edge research on biomass valorization, from advanced fabrication methodologies through useful derived materials, to current and potential application sectors. Industrial sectors, such as food, textiles, petrochemicals and pharmaceuticals, generate massive amounts of waste each year, the disposal of which has become a major issue worldwide. As a result, implementing a circular economy that employs sustainable practices in waste management is critical for any industry. Moreover, fossil fuels, which are the primary sources of fuel in the transportation sector, are also being rapidly depleted at an alarming rate. Therefore, to combat these global issues without increasing our carbon footprint, we must look for renewable resources to produce chemicals and biomaterials. In that context, agricultural waste materials are gaining popularity as cost-effective and abundantly available alternatives to fossil resources for the production of a variety of value-added products, including renewable fuels, fuel components, and fuel additives. Handbook of Biomass Valorization for Industrial Applications investigates current and emerging feedstocks, as well as provides in-depth technical information on advanced catalytic processes and technologies that enable the development of all possible alternative energy sources. The 22 chapters of this book comprehensively cover the valorization of agricultural wastes and their various uses in value-added applications like energy, biofuels, fertilizers, and wastewater treatment. Audience The book is intended for a very broad audience working in the fields of materials sciences, chemical engineering, nanotechnology, energy, environment, chemistry, etc. This book will be an invaluable reference source for the libraries in universities and industrial institutions, government and independent institutes, individual research groups, and scientists working in the field of valorization of biomass.
Download or read book Understanding Renewable Energy Systems written by Volker Quaschning and published by Routledge. This book was released on 2016-03-31 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: By mid-century, renewable energy must cover all of our energy supply if we are to phase out nuclear and successfully stop climate change. Now updated and expanded, the 2nd edition of this textbook covers the full range of renewable energy systems and now also includes such current trends as solar power storage, power-to-gas technologies, and the technology paths needed for a successful and complete energy transition. The topics are treated in a holistic manner, bringing together maths, engineering, climate studies and economics, and enabling readers to gain a broad understanding of renewable energy technologies and their potential.Numerous examples are provided for calculations, and graphics help visualize the various technologies and mathematical methodologies. Understanding Renewable Energy Systems is an ideal companion for students of renewable energy at universities or technical colleges on courses such as renewable energy, electrical engineering, engineering technology, physics, process engineering, building engineering, environment, applied mechanics and mechanical engineering, as well as scientists and engineers in research and industry.
Download or read book Applications of Nanotechnology for Green Synthesis written by Inamuddin and published by Springer Nature. This book was released on 2020-07-02 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional methods in synthetic chemistry produce chemical waste and byproducts, yield smaller desired products, and generate toxic chemical substances, but the past two centuries have seen consistent, greener improvements in organic synthesis and transformations. These improvements have contributed to substance handling efficiency by using green-engineered forerunners like sustainable techniques, green processes, eco-friendly catalysis, and have minimized energy consumption, reduced potential waste, improved desired product yields, and avoided toxic organic precursors or solvents in organic synthesis. Green synthesis has the potential to have a major ecological and monetary impact on modern pharmaceutical R&D and organic chemistry fields. This book presents a broad scope of green techniques for medicinal, analytical, environmental, and organic chemistry applications. It presents an accessible overview of new innovations in the field, dissecting the highlights and green chemistry attributes of approaches to green synthesis, and provides cases to exhibit applications to pharmaceutical and organic chemistry. Although daily chemical processes are a major part of the sustainable development of pharmaceuticals and industrial products, the resulting environmental pollution of these processes is of worldwide concern. This edition discusses green chemistry techniques and sustainable processes involved in synthetic organic chemistry, natural products, drug syntheses, as well various useful industrial applications.
