Download or read book Graphene for Flexible Lighting and Displays written by Tae Woo Lee and published by Woodhead Publishing. This book was released on 2019-11-16 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene for Next Generation Lighting and Displays provides readers with a comprehensive overview of graphene, flexible graphene electrodes, and graphene-based next-generation display and lighting. The book covers a wide range of information, including the basic physics of graphene and recent trends in technical developments for graphene-based flexible and stretchable light-emitting devices. In addition, it discusses future prospects and suggests further directions for research on graphene-based next-generation displays and lightings. In addition, the book includes sections on the fundamental properties of graphene, synthetic methods of graphene, preparation of graphene electrodes and composite electrodes, and doping methods for graphene electrodes. Potential applications are also addressed including graphene-based flexible electrodes, buffer layer, emitters, and graphene-based stretchable electrodes. Reviews the most promising applications, including OLEDs, graphene-based buffer layers for LEDs, quantum dot emitters, and stretchable graphene electrodes Describes practical approaches in modifying the properties of graphene for the purpose of optoelectronic applications
Download or read book Advances in Carbon Nanostructures written by Adrián Silva and published by BoD – Books on Demand. This book was released on 2016-10-05 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon atoms have the amazing ability to bond in remarkable different manners that can assume distinct astonishing dimensional arrangements from which absolutely diverse and interesting nanostructured carbon materials are obtained. This book aims to cover the most recent advances in (i) Graphene and derivatives, including graphene-based magnetic composites, membranes, wafer devices, and nanofibers for several applications, as well as some particular properties, such as light emission from graphene; (ii) Carbon nanotubes heaters and fibers for reinforcement of cement and diamond-based thin films; and (iii) Nanofluids consisting of both graphene and carbon nanotubes, apart from reporting some important case studies dealing with carbon nanostructures and their use in sensors, coatings, or electromagnetic wave absorbers.
Download or read book The Fundamentals and Applications of Light Emitting Diodes written by Govind B. Nair and published by Woodhead Publishing. This book was released on 2020-07-09 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fundamentals and Applications of Light-Emitting Diodes: The Revolution in the Lighting Industry examines the evolution of LEDs, including a review of the luminescence process and background on solid state lighting. The book emphasizes phosphor-converted LEDs that are based on inorganic phosphors but explores different types of LEDs based on inorganic, organic, quantum dots, perovskite-structured materials, and biomaterials. A detailed description is included about the diverse applications of LEDs in fields such as lighting, displays, horticulture, biomedicine, and digital communication, as well as challenges that must be solved before using LEDs in commercial applications. Traditional light sources are fast being replaced by light-emitting diodes (LEDs). The fourth generation of lighting is completely dominated by LED luminaires. Apart from lighting, LEDs have extended their hold on other fields, such as digital communications, horticulture, medicine, space research, art and culture, display devices, and entertainment. The technological promises offered by LEDs have elevated them as front-runners in the lighting industry. Presents a concise overview of different types of light-emitting diodes (LEDs) based on inorganic phosphors, organic materials, quantum dots, perovskite-structured materials, and biomaterials Includes a discussion of current and emerging applications in lighting, communications, horticulture, and medical fields Addresses fundamentals, luminescence mechanisms, and key optical materials, including synthesis methods
Download or read book Organic Light Emitting Diode OLED Toward Smart Lighting and Displays Technologies written by Laxman Singh and published by CRC Press. This book was released on 2023-09-29 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Organic Light Emitting Diode (OLED) Toward Smart Lighting and Displays Technologies, edited by Laxman Singh, Rituraj Dubey, and Prof. R. N. Rai, strives to address the multiple aspects of OLEDs and their applications in developing smart lightings and displays. OLEDs have been used in almost all kinds of digital displays like those of mobile phones, laptops, tablets, phablets, TVs, etc., due to their outstanding features, including superior color quality, low cost, wide viewing angle, easy fabrication, mercury-free manufacture, tenability, stretchability, flexibility, etc. Investigations related to the synthesis of new organic materials and fabrication techniques have inspired us to write this book, which will fulfil the desire and thirst of OLEDs-based researchers. Features Nanolithographic techniques used and the challenges involved Printing technology for fabrication Designing of hybrid perovskites Stretchable and flexible materials used Metal–dielectric composites and efficiency of organic semiconductor via molecular doping for OLEDs applications Organic small molecule materials and display technologies involved New generation of organic materials with respect to photophysical approach Mixed valence π-conjugated coordination polymers used Electroluminescent polymer used Blue fluorescent and phosphorescent organic materials used In comparison to other books available related to similar topics, this book aims at those audiences who are looking for a single source for a comprehensive understanding of strategies and their challenges with respect to material fabrication of OLEDs. This book covers the pace and productivity at a uniform level in each chapter with respect to the audiences, from doctoral student to postdoctoral researchers or from postdoctoral researchers to multidisciplinary field researchers with a background in physics, chemistry, materials science, and engineering, who are already working with organic materials and their applications.
Download or read book Dielectrics in Nanosystems and Graphene Ge III V Nanowires and Emerging Materials for Post CMOS Applications 3 written by Zia Karim and published by The Electrochemical Society. This book was released on 2011-04-25 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions will cover the following topics in (a) Graphene Material Properties, Preparation, Synthesis and Growth; (b) Metrology and Characterization of Graphene; (c) Graphene Devices and Integration; (d) Graphene Transport and mobility enhancement; (e) Thermal Behavior of Graphene and Graphene Based Devices; (f) Ge & III-V devices for CMOS mobility enhancement; (g) III.V Heterostructures on Si substrates; (h) Nano-wires devices and modeling; (i) Simulation of devices based on Ge, III-V, nano-wires and Graphene; (j) Nanotechnology applications in information technology, biotechnology and renewable energy (k) Beyond CMOS device structures and properties of semiconductor nano-devices such as nanowires; (l) Nanosystem fabrication and processing; (m) nanostructures in chemical and biological sensing system for healthcare and security; and (n) Characterization of nanosystems; (f) Nanosystem modeling.
Download or read book Flexible Carbon based Electronics written by Paolo Samorì and published by John Wiley & Sons. This book was released on 2019-02-11 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third volume in the Advanced Nanocarbon Materials series covers the topic of flexible electronics both from a materials and an applications perspective. Comprehensive in its scope, the monograph examines organic, inorganic and composite materials with a section devoted to carbon-based materials with a special focus on the generation and properties of 2D materials. It also presents carbon modifications and derivatives, such as carbon nanotubes, graphene oxide and diamonds. In terms of the topical applications covered these include, but are not limited to, flexible displays, organic electronics, transistors, integrated circuits, semiconductors and solar cells. These offer perspectives for today?s energy and healthcare challenges, such as electrochemical energy storage and wearable devices. Finally, a section on fundamental properties and characterization approaches of flexible electronics rounds off the book. Each contribution points out the importance of the structure-function relationship for the target-oriented fabrication of electronic devices, enabling the design of complex components.
Download or read book Micro Light Emitting Diode Fabrication and Devices written by Jong-Hyun Ahn and published by Springer Nature. This book was released on 2022-01-04 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on basic fundamental and applied aspects of micro-LED, ranging from chip fabrication to transfer technology, panel integration, and various applications in fields ranging from optics to electronics to and biomedicine. The focus includes the most recent developments, including the uses in large large-area display, VR/AR display, and biomedical applications. The book is intended as a reference for advanced students and researchers with backgrounds in optoelectronics and display technology. Micro-LEDs are thin, light-emitting diodes, which have attracted considerable research interest in the last few years. They exhibit a set of exceptional properties and unique optical, electrical, and mechanical behaviors of fundamental interest, with the capability to support a range of important exciting applications that cannot be easily addressed with other technologies. The content is divided into two parts to make the book approachable to readers of various backgrounds and interests. The first provides a detailed description with fundamental materials and production approaches and assembly/manufacturing strategies designed to target readers who seek an understanding ofof essential materials and production approaches and assembly/manufacturing strategies designed to target readers who want to understand the foundational aspects. The second provides detailed, comprehensive coverage of the wide range of device applications that have been achieved. This second part targets readers who seek a detailed account of the various applications that are enabled by micro-LEDs.
Download or read book Graphene for Transparent Conductors written by Qingbin Zheng and published by Springer. This book was released on 2015-07-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic presentation of the principles and practices behind the synthesis and functionalization of graphene and grapheme oxide (GO), as well as the fabrication techniques for transparent conductors from these materials. Transparent conductors are used in a wide variety of photoelectronic and photovoltaic devices, such as liquid crystal displays (LCDs), solar cells, optical communication devices, and solid-state lighting. Thin films made from indium tin oxide (ITO) have thus far been the dominant source of transparent conductors, and now account for 50% of indium consumption. However, the price of Indium has increased 1000% in the last 10 years. Graphene, a two-dimensional monolayer of sp2-bonded carbon atoms, has attracted significant interest because of its unique transport properties. Because of their high optical transmittance and electrical conductivity, thin film electrodes made from graphene nanosheets have been considered an ideal candidate to replace expensive ITO films. Graphene for Transparent Conductors offers a systematic presentation of the principles, theories and technical practices behind the structure–property relationship of the thin films, which are the key to the successful development of high-performance transparent conductors. At the same time, the unique perspectives provided in the applications of graphene and GO as transparent conductors will serve as a general guide to the design and fabrication of thin film materials for specific applications.
Download or read book Low Power Designs in Nanodevices and Circuits for Emerging Applications written by Shilpi Birla and published by CRC Press. This book was released on 2023-11-14 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference textbook discusses low power designs for emerging applications. This book focuses on the research challenges associated with theory, design, and applications towards emerging Microelectronics and VLSI device design and developments, about low power consumptions. The advancements in large-scale integration technologies are principally responsible for the growth of the electronics industry. This book is focused on senior undergraduates, graduate students, and professionals in the field of electrical and electronics engineering, nanotechnology. This book: Discusses various low power techniques and applications for designing efficient circuits Covers advance nanodevices such as FinFETs, TFETs, CNTFETs Covers various emerging areas like Quantum-Dot Cellular Automata Circuits and FPGAs and sensors Discusses applications like memory design for low power applications using nanodevices The number of options for ICs in control applications, telecommunications, high-performance computing, and consumer electronics continues to grow with the emergence of VLSI designs. Nanodevices have revolutionized the electronics market and human life; it has impacted individual life to make it more convenient. They are ruling every sector such as electronics, energy, biomedicine, food, environment, and communication. This book discusses various emerging low power applications using CMOS and other emerging nanodevices.
Download or read book Stretchable Electronics written by Takao Someya and published by John Wiley & Sons. This book was released on 2013-01-29 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: On a daily basis, our requirements for technology become more innovative and creative and the field of electronics is helping to lead the way to more advanced appliances. This book gathers and evaluates the materials, designs, models, and technologies that enable the fabrication of fully elastic electronic devices that can tolerate high strain. Written by some of the most outstanding scientists in the field, it lays down the undisputed knowledge on how to make electronics withstand stretching. This monograph provides a review of the specific applications that directly benefit from highly compliant electronics, including transistors, photonic devices, and sensors. In addition to stretchable devices, the topic of ultraflexible electronics is treated, highlighting its upcoming significance for the industrial-scale production of electronic goods for the consumer. Divided into four parts covering: * Theory * Materials and Processes * Circuit Boards * Devices and Applications An unprecedented overview of this thriving area of research that nobody in the field - or intending to enter it - can afford to miss.
Download or read book Fabrication Techniques and Applications of Flexible Graphene based Electronic Devices Project Supported by the National Natural Science Foundation of China Nos 60936002 61025021 61434001 61574083 the State Key Development Program for Basic Research of China No 2015CB352100 the National Key Project of Science and Technology No 2011ZX02403 002 and the Special Fund for Agroscientific Research in the Public Interest of China No 201303107 M A M is Additionally Supported by the Postdoctoral Fellowship PDF Program of the Natural Sciences and Engineering Research Council NSERC of Canada and China s Postdoctoral Science Foundation CPSF written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: In recent years, flexible electronic devices have become a hot topic of scientific research. These flexible devices are the basis of flexible circuits, flexible batteries, flexible displays and electronic skins. Graphene-based materials are very promising for flexible electronic devices, due to their high mobility, high elasticity, a tunable band gap, quantum electronic transport and high mechanical strength. In this article, we review the recent progress of the fabrication process and the applications of graphene-based electronic devices, including thermal acoustic devices, thermal rectifiers, graphene-based nanogenerators, pressure sensors and graphene-based light-emitting diodes. In summary, although there are still a lot of challenges needing to be solved, graphene-based materials are very promising for various flexible device applications in the future.
Download or read book The Digitalisation of Science Technology and Innovation Key Developments and Policies written by OECD and published by OECD Publishing. This book was released on 2020-02-11 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines digitalisation’s effects on science, technology and innovation and the associated consequences for policy. In varied and far-reaching ways, digital technologies are changing how scientists work, collaborate and publish.
Download or read book 15th European Workshop on Metalorganic Vapour Phase Epitaxy EWMOVPE XV written by and published by Forschungszentrum Jülich. This book was released on 2013 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book LED Lighting written by Malvin Carl Teich and published by Google Books/Teich Consultants. This book was released on 2024-02-28 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: LED Lighting is a self-contained and introductory-level book featuring a blend of theory and applications that thoroughly covers this important interdisciplinary area. Building on the underlying fields of optics, photonics, and vision science, it comprises four parts. PART I is devoted to fundamentals. The behavior of light is described in terms of rays, waves, and photons. Each of these approaches is best suited to a particular set of applications. The properties of blackbody radiation, thermal light, and incandescent light are derived and explained. The essentials of semiconductor physics are set forth, including the operation of junctions and heterojunctions, quantum wells and quantum dots, and organic and perovskite semiconductors. PART II deals with the generation of light in semiconductors, and details the operation and properties of III-V semiconductor devices (MQWLEDs and μLEDs), quantum-dot devices (QLEDs & WOLEDs), organic semiconductor devices (OLEDs, SMOLEDs, PLEDs, & WOLEDs), and perovskite devices (PeLEDs, PPeLEDs, QPeLEDs, & PeWLEDs). PART III focuses on vision and the perception of color, as well as on colorimetry. It delineates radiometric and photometric quantities as well as efficacy and efficiency measures. It relays the significance of metrics often encountered in LED lighting, including the color rendering index (CRI), color temperature (CT), correlated color temperature (CCT), and chromaticity diagram. PART IV is devoted to LED lighting, focusing on its history and salutary features, and on how this modern form of illumination is deployed. It describes the principal components used in LED lighting, including white phosphor-conversion LEDs, chip-on-board (COB) devices, color-mixing LEDs, hybrid devices, LED filaments, retrofit LED lamps, LED luminaires, and OLED light panels. It concludes with a discussion of smart lighting and connected lighting. Each chapter contains highlighted equations, color-coded figures, practical examples, and reading lists.
Download or read book Non Metal Catalyzed Synthesis written by Yunfei Du and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-12-04 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-metal catalysis may provide new and green methods for obtaining bioactive heterocycles. Many catalysts contain metals, which can be toxic, energy intensive to remove, and require mining of the source materials. By utilizing metal-free catalysts we avoid these issues. This book explores the use of non-metal catalysts when synthesizing various heterocyclic structures with bioactivity.
Download or read book Flexible Flat Panel Displays written by Darran R. Cairns and published by John Wiley & Sons. This book was released on 2023-05-08 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible Flat Panel Displays A complete treatment of the entire lifecycle of flexible flat panel displays, from raw material selection to commercialization In the newly revised Second Edition of Flexible Flat Panel Displays, a distinguished team of researchers delivers a completely restructured and comprehensive treatment of the field of flexible flat panel displays. With material covering the end-to-end process that includes commercial and technical aspects of the technology, the editors have included contributions that introduce the business, marketing, entrepreneurship, and intellectual property content relevant to flexible flat panel displays. This edited volume contains a brand-new section on case studies using the Harvard Business School format that discusses current and emerging markets in flexible displays, such as an examination of the use of electronic ink and QD Vision in commercial devices. From raw material selection to device prototyping, manufacturing, and commercialization, each stage of the flexible display business is discussed in this insightful new edition. The book also includes: Thorough introductions to engineered films for display technology and liquid crystal optical coatings for flexible displays Comprehensive explorations of organic TFT foils, metallic nanowires, adhesives, and self-healing polymer substrates Practical discussions of flexible glass, AMOLEDs, cholesteric displays, and electronic paper In-depth examinations of the encapsulation of flexible displays, flexible batteries, flexible flat panel photodetectors, and flexible touch screens Perfect for professionals working in the field of display technology with backgrounds in science and engineering, Flexible Flat Panel Displays is also an indispensable resource for professionals with marketing, sales, and technology backgrounds, as well as senior undergraduates and graduate students in engineering and materials science.
Download or read book OLED Fundamentals written by Daniel J. Gaspar and published by CRC Press. This book was released on 2015-05-15 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Source for Taking on the Next Stage of OLED R&DOLED Fundamentals: Materials, Devices, and Processing of Organic Light-Emitting Diodes brings together key topics across the field of organic light-emitting diodes (OLEDs), from fundamental chemistry and physics to practical materials science and engineering aspects to design and ma