Download or read book Graphene Based Polymer Nanocomposites in Electronics written by Kishor Kumar Sadasivuni and published by Springer. This book was released on 2015-01-19 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers graphene reinforced polymers, which are useful in electronic applications, including electrically conductive thermoplastics composites, thermosets and elastomers. It systematically introduces the reader to fundamental aspects and leads over to actual applications, such as sensor fabrication, electromagnetic interference shielding, optoelectronics, superconductivity, or memory chips. The book also describes dielectric and thermal behaviour of graphene polymer composites - properties which are essential to consider for the fabrication and production of these new electronic materials. The contributions in this book critically discuss the actual questions in the development and applications of graphene polymer composites. It will thus appeal to chemists, physicists, materials scientists as well as nano technologists, who are interested in the properties of graphene polymer composites.
Download or read book Novel Applications of Carbon Based Nano materials written by Swamini Chopra and published by CRC Press. This book was released on 2022-11-03 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: "There’s plenty of room at the bottom" - Richard Feynman’s legendary sentence has practically teleported the world into the age of Nano-technology over the last couple of decades. As nano-materials started drawing extensive attention, the use of nano-technology has opened many possibilities for humans. Carbon based nano-materials are an example of such prominent class of materials, which have an enormous potential to fit a wide range of applications, ranging from the energy sector to aircraft and automotive sector to bio-medical sector, etc. The book Novel Applications of Carbon Based Nano-Materials summarizes state-of-the-art studies focusing on various applications of carbon allotropes, considering the energy and environmental benefits and the socio-economic impact of the developed systems, all at the same time.
Download or read book Chemical Physics of Polymer Nanocomposites written by Vera V. Myasoedova and published by John Wiley & Sons. This book was released on 2024-07-17 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive knowledge on the preparation, characterization, and applications of polymer nanocomposites Chemical Physics of Polymer Nanocomposites examines the state of the art in preparation, processing, characterizing, and applying a wide range of polymer nanocomposites, elucidating nanofiller/polymer interactions, nanofiller dispersion, distribution, filler-filler interactions, and interface properties, with a particular focus on the rheology of this important class of materials. The dependence of the rheological properties on the preparation techniques is discussed in detail, complemented by an overview of the processing approaches using conventional and micro injection molding, extrusion, compression molding, film blowing, pultrusion, and resin transfer molding. The book covers the latest understanding and accomplishments on polymer composites and presents the huge variety of this materials class. Practice-oriented with industry relevance, it also reviews preparation, characterization, morphology, properties, applications, sustainability, and recyclability. The topics covered in Chemical Physics of Polymer Nanocomposites include: Classification of nano fillers, nano-objects, nanomaterials, and polymer nanocomposites based on chemical nature and identity, and synthesis and characterization of nanoparticles General manufacturing methods and processes, including melt and shear mixing manufacturing of polymer nanocomposites 1D nano fillers and polymer nanocomposites, including polymer nanocomposites based on graphite nanoplatelets (GNP) and amphiphilic graphene platelets Polymer nanocomposites based on nano chitin, starch, and lignin, gold nanowires, titanium dioxide, and graphene and graphene oxide Chemical Physics of Polymer Nanocomposites is an essential resource for materials scientists, polymer chemists, chemical engineers, and engineering scientists in industry.
Download or read book Graphene Based Nanomaterials written by Yugal Kishore Mohanta and published by CRC Press. This book was released on 2024-02-08 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a comprehensive overview of the historical, current, and prospective application realms of nanobiotechnological research pertaining to graphene, a carbon-based nanomaterial, and its diverse forms in the fields of food and agriculture, as well as health sciences and technology. Young nanotechnologists and businesses will have access to nanobioanalytical methods. Given the present circumstances, it is crucial to underscore the potential ramifications that diverse forms of graphene nanomaterials could have on the food sector, agricultural methodologies, and healthcare. This book presents an analysis of the potential advantages of graphene-based nanomaterials over traditional materials in the food, agriculture, and health care sectors. This book employs case studies, academic and theoretical literature, technology transfer, innovation, economics, and policy management to underscore the intricate issues associated with graphene nanomaterials. The pioneering text Graphene-Based Nanomaterials: Application in Food, Agriculture, and Healthcare has the potential to serve as a valuable resource for interdisciplinary researchers, academics, practitioners, policymakers, and professionals operating within the fields of science, technology, engineering, innovation, management, and economics. Features · Discusses the different aspects of graphene as a two-dimensional material and its underlying unique physicochemical properties, synthesis methods, and protocols. · Considers the implications of graphene in the food sciences and its different spoilage detection mechanisms have been encompassed in the book. · Explores graphene nanomaterials' medical and biomedical uses. With examples, the unique and tailor-made material's uses and prospects in health sciences, pharmaceutics, and biomedical research are highlighted. · Elaborates on graphene's applications in agriculture and briefs the potential of biocompatible planar conductive nanoscale materials to boost agri-product production, crop development, and crop-infection surveillance.
Download or read book Graphene based Carbocatalysts Synthesis Properties and Applications written by Pinki Bala Punjabi and published by Bentham Science Publishers. This book was released on 2023-05-31 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book informs readers about recent advances in graphene carbocatalysis encapsulating the current developments in the syntheses, properties, characterizations, functionalization and catalytic applications of graphene, its derivatives and composites. It serves as a comprehensive primary reference book for chemistry and engineering students who are required to learn about graphene chemistry in detail. It also serves as an introductory reference for industry professionals and researchers who are interested in graphene research as well as its emerging applications in catalysis and beyond Volume 1 provides an introduction to catalysis and the chemistry of graphene. This is followed by chapters that cover the chemistry of graphene compounds. Next, it covers the functionalization of graphene into catalytic materials and its role in the synthesis of nanocomposites. Finally, the book delves into the complex aspects of graphene carbocatalysis: recent advances in graphene supported palladium catalysts for coupling reactions, applications of graphene-based catalysts in multicomponent, domino reactions, oxidation and reduction reactions, and recent trends in biocatalytic properties of graphene-based composites are all discussed in detail.
Download or read book Nanoelectronics written by Robert Puers and published by John Wiley & Sons. This book was released on 2017-06-19 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering first-hand insights by top scientists and industry experts at the forefront of R&D into nanoelectronics, this book neatly links the underlying technological principles with present and future applications. A brief introduction is followed by an overview of present and emerging logic devices, memories and power technologies. Specific chapters are dedicated to the enabling factors, such as new materials, characterization techniques, smart manufacturing and advanced circuit design. The second part of the book provides detailed coverage of the current state and showcases real future applications in a wide range of fields: safety, transport, medicine, environment, manufacturing, and social life, including an analysis of emerging trends in the internet of things and cyber-physical systems. A survey of main economic factors and trends concludes the book. Highlighting the importance of nanoelectronics in the core fields of communication and information technology, this is essential reading for materials scientists, electronics and electrical engineers, as well as those working in the semiconductor and sensor industries.
Download or read book Graphene Electrolyte Interfaces written by Hualin Zhan and published by CRC Press. This book was released on 2020-04-07 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene–electrolyte systems are commonly found in cutting-edge research on electrochemistry, biotechnology, nanoelectronics, energy storage, materials engineering, and chemical engineering. The electrons in graphene intimately interact with ions from an electrolyte at the graphene–electrolyte interface, where the electrical or chemical properties of both graphene and electrolyte could be affected. The electronic behavior therefore determines the performance of applications in both Faradaic and non-Faradaic processes, which require intensive studies. This book systematically integrates the electronic theory and experimental techniques for both graphene and electrolytes. The theoretical sections detail the classical and quantum description of electron transport in graphene and the modern models for charges in electrolytes. The experimental sections compile common techniques for graphene growth/characterization and electrochemistry. Based on this knowledge, the final chapter reviews a few applications of graphene–electrolyte systems in biosensing, neural recording, and enhanced electronic devices, in order to inspire future developments. This multidisciplinary book is ideal for a wide audience, including physicists, chemists, biologists, electrical engineers, materials engineers, and chemical engineers.
Download or read book Nanoelectronics Physics Materials and Devices written by Angsuman Sarkar and published by Elsevier. This book was released on 2023-01-03 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.528 pagesApprox.528 pages
Download or read book Graphene Materials written by George Kyzas and published by BoD – Books on Demand. This book was released on 2017-05-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is, basically, a single atomic layer of graphite, an abundant mineral that is an allotrope of carbon that is made up of very tightly bonded carbon atoms organized into a hexagonal lattice. What makes graphene so special is its sp2 hybridization and very thin atomic thickness (of 0.345 Nm). These properties are what enable graphene to break so many records in terms of strength, electricity, and heat conduction (as well as many others). This book gathers valuable information about many advanced applications of graphene (electrical, optical, environmental, cells, capacitors, etc).
Download or read book Electronic and Thermal Properties of Graphene written by Kyong Yop Rhee and published by Mdpi AG. This book was released on 2020-07 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue includes recent research articles and extensive reviews on graphene-based next-generation electronics, bringing together perspectives from different branches of science and engineering. The papers presented in this volume cover experimental, computational and theoretical aspects of the electrical and thermal properties of graphene and its applications in batteries, electrodes, sensors and ferromagnetism. In addition, this Special Issue covers many important state-of-the-art technologies and methodologies regarding the synthesis, fabrication, characterization and applications of graphene-based nanocomposites.
Download or read book Microelectronics to Nanoelectronics written by Anupama B. Kaul and published by CRC Press. This book was released on 2017-12-19 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composed of contributions from top experts, Microelectronics to Nanoelectronics: Materials, Devices and Manufacturability offers a detailed overview of important recent scientific and technological developments in the rapidly evolving nanoelectronics arena. Under the editorial guidance and technical expertise of noted materials scientist Anupama B. Kaul of California Institute of Technology’s Jet Propulsion Lab, this book captures the ascent of microelectronics into the nanoscale realm. It addresses a wide variety of important scientific and technological issues in nanoelectronics research and development. The book also showcases some key application areas of micro-electro-mechanical-systems (MEMS) that have reached the commercial realm. Capitalizing on Dr. Kaul’s considerable technical experience with micro- and nanotechnologies and her extensive research in prestigious academic and industrial labs, the book offers a fresh perspective on application-driven research in micro- and nanoelectronics, including MEMS. Chapters explore how rapid developments in this area are transitioning from the lab to the market, where new and exciting materials, devices, and manufacturing technologies are revolutionizing the electronics industry. Although many micro- and nanotechnologies still face major scientific and technological challenges and remain within the realm of academic research labs, rapid advances in this area have led to the recent emergence of new applications and markets. This handbook encapsulates that exciting recent progress by providing high-quality content contributed by international experts from academia, leading industrial institutions—such as Hewlett-Packard—and government laboratories including the U.S. Department of Energy’s Sandia National Laboratory. Offering something for everyone, from students to scientists to entrepreneurs, this book showcases the broad spectrum of cutting-edge technologies that show significant promise for electronics and related applications in which nanotechnology plays a key role.
Download or read book Nanoelectronics Devices Design Materials and Applications Part II written by Gopal Rawat and published by Bentham Science Publishers. This book was released on 2023-11-28 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoelectronics Devices: Design, Materials, and Applications provides information about the progress of nanomaterial and nanoelectronic devices and their applications in diverse fields (including semiconductor electronics, biomedical engineering, energy production and agriculture). The book is divided into two parts. The editors have included a blend of basic and advanced information with references to current research. The book is intended as an update for researchers and industry professionals in the field of electronics and nanotechnology. It can also serve as a reference book for students taking advanced courses in electronics and technology. The editors have included MCQs for evaluating the readers’ understanding of the topics covered in the book. Topics Covered in Part 2 include applications of nanoelectronics for different devices and materials. - Photonic crystal waveguide geometry - 8kW to 80kW power grids with simple energy storage systems - Two-dimensional material and based heterojunctions like MoS2 /graphene, MoS2 /CNT, and MoS2 /WS2, - 5G communication material - Wearable devices like electronic skin, intelligent wound bandages, tattoo-based electrochemical sensors - PEDOT: PSS-based EEG - New materials for medicine
Download or read book Graphene Science Handbook Six Volume Set written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2016-04-26 with total page 3379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is the strongest material ever studied and can be an efficient substitute for silicon. This six-volume handbook focuses on fabrication methods, nanostructure and atomic arrangement, electrical and optical properties, mechanical and chemical properties, size-dependent properties, and applications and industrialization. There is no other major reference work of this scope on the topic of graphene, which is one of the most researched materials of the twenty-first century. The set includes contributions from top researchers in the field and a foreword written by two Nobel laureates in physics. Volumes in the set: K20503 Graphene Science Handbook: Mechanical and Chemical Properties (ISBN: 9781466591233) K20505 Graphene Science Handbook: Fabrication Methods (ISBN: 9781466591271) K20507 Graphene Science Handbook: Electrical and Optical Properties (ISBN: 9781466591318) K20508 Graphene Science Handbook: Applications and Industrialization (ISBN: 9781466591332) K20509 Graphene Science Handbook: Size-Dependent Properties (ISBN: 9781466591356) K20510 Graphene Science Handbook: Nanostructure and Atomic Arrangement (ISBN: 9781466591370)
Download or read book Graphene Science Handbook written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2016-04-27 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the Unique Electron Transport Properties of GrapheneThe Graphene Science Handbook is a six-volume set that describes graphene's special structural, electrical, and chemical properties. The book considers how these properties can be used in different applications (including the development of batteries, fuel cells, photovoltaic cells, and s
Download or read book Emerging Applications of Carbon Nanotubes and Graphene written by Bhanu Pratap Singh and published by CRC Press. This book was released on 2023-02-27 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews recent and emerging applications of carbon nanotubes and graphene materials in a wide range of sectors. Detailed applications include structural materials, ballistic materials, energy storage and conversion, batteries, supercapacitors, smart sensors, environmental protection, nanoelectronics, optoelectronic and photovoltaics, thermoelectric, and conducting wires. It further covers human and structural health monitoring, and thermal management applications. Key selling features: Exclusively takes an application-oriented approach to cover emerging areas in carbon nanotubes and graphene Covers fundamental and applied knowledge related to carbon nanomaterials Includes advanced applications like human and structural health monitoring, smart sensors, ballistic protection and so forth Discusses novel applications such as thermoelectrics along with environmental protection related application Explores aspects of energy storage, generation and conversion including batteries, supercapacitors, and photovoltaics This book is aimed at graduate students and researchers in electrical, nanomaterials, chemistry, and other related areas.
Download or read book Nanoelectronics Devices Design Materials and Applications Part I written by Gopal Rawat and published by Bentham Science Publishers. This book was released on 2023-10-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoelectronics Devices: Design, Materials, and Applications provides information about the progress of nanomaterial and nanoelectronic devices and their applications in diverse fields (including semiconductor electronics, biomedical engineering, energy production and agriculture). The book is divided into two parts. The editors have included a blend of basic and advanced information with references to current research. The book is intended as an update for researchers and industry professionals in the field of electronics and nanotechnology. It can also serve as a reference book for students taking advanced courses in electronics and technology. The editors have included MCQs for evaluating the readers’ understanding of the topics covered in the book. Topics covered in Part 1 include basic knowledge on nanoelectronics with examples of testing different device parameters. - The present, past, and future of nanoelectronics, - An introduction to Nanoelectronics and applicability of Moore's law - Transport of charge carrier, electrode, and measurement of device parameters - Fermi level adjustment in junction less transistor, - Non-polar devices and their simulation - The negative capacitance in MOSFET devices - Effect of electrode in the device operation - Second and Sixth group semiconductors, - FinFET principal and future, Electronics and optics integration for fast processing and data communication - Batteryless photo detectors - Solar cell fabrication and applications - Van der Waals assembled nanomaterials
