Download or read book Goodyear GA 28A B Convoy Fighter written by Jared A. Zichek and published by Jared A. Zichek. This book was released on 2015-08-10 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed overview of the Goodyear Aircraft Corporation GA-28A/B, one of the submissions to the US Navy convoy fighter competition of 1950, which ultimately produced the Convair XFY-1 and Lockheed XFV-1 VTOL aircraft. The GA-28A was a three-quarter scale prototype of the convoy fighter, while the GA-28B was the full scale design armed with four 20 mm cannon. Both were VTOL tailsitters powered by turboprop engines and featured a semi-delta, semi-midwing configuration with triple vertical tail surfaces. The aircraft also had unusual landing gear which permitted either conventional or vertical landing and takeoff. Features 40 illustrations, including detailed schematics, artist's impressions, and speculative color profiles of these unorthodox aircraft designs. An ideal book for modelers and enthusiasts of secret aircraft projects.
Download or read book Northrop N 63 Convoy Fighter written by Jared A. Zichek and published by Retromechanix Productions. This book was released on 2015-11-11 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Northrop N-63 was an unconventional VTOL turboprop tailsitter aircraft proposal submitted to the US Navy's convoy fighter competition of 1950, which ultimately produced the Convair XFY-1 Pogo and Lockheed XFV-1 Salmon. It was a single-seat high performance fighter designed to protect convoy vessels from attack by enemy aircraft, and for vertical unassisted takeoff from, and landings on, small platform areas afloat or ashore. The N-63 featured a straight wing with pronounced dihedral and a very large ventral T-tail; armament consisted of four 20 mm cannon mounted in large pods on the wing tips. The aircraft was powered by an Allison XT-40-A-8 turboprop engine driving 15.5 ft six-blade dual-rotation propellers. The Northrop convoy fighter was designed to land vertically on a robust central landing strut in a collapsible tailcone as well as small shock absorbers located on the aft ends of the wing pods and vertical stabilizer; these landing support points were spread far apart to enhance stability on the deck. In addition to the N-63, Northrop also submitted the N-63A scale prototype airplane design, a small technology demonstrator powered by an Armstrong Siddeley Double Mamba turboprop. It featured a swappable tail section and auxiliary landing gear which permitted it to take off and land either conventionally or vertically, depending on the proficiency of the pilot. This ebook features 66 illustrations, including detailed schematics, artist's impressions, photos, and speculative color profiles of these remarkable secret aircraft projects, which are sure to appeal to historical aviation enthusiasts and scale modelers alike. This is the publisher's third book covering the convoy fighter competition, the first two being devoted to the Goodyear GA-28A/B and Martin Model 262, both of which are still available from booksellers worldwide in print and digital formats.
Download or read book Martin Model 262 Convoy Fighter written by Jared A. Zichek and published by Jared A. Zichek. This book was released on 2015-10-03 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Martin Model 262 was an unconventional turboprop VTOL aircraft proposal submitted to the US Navy’s convoy fighter competition of 1950, which ultimately produced the Convair XFY-1 Pogo and Lockheed XFV-1 Salmon. It was a swept-wing aircraft with triple vertical tails powered by an Allison XT-40-A-8 turboprop engine driving 16 ft contra-rotating propellers. The launch and recovery system consisted of a hinged vertical platform mounted on a merchant ship. The pilot approached the platform from the side and hovered vertically just in front of it, attaching the aircraft to the platform with a retractable nosegear spike and landing on two small retractable wing gear. The fighter was armed with four 20 mm cannon and was designed to protect convoy vessels from enemy air attack. In addition to the basic Model 262, Martin also presented Modifications A, B and C, the configurations of which were even more unorthodox than the main proposal. Finally, the book examines the Model 262P, a handsome scale demonstrator designed to verify the basic soundness of the concept. This ebook features a comprehensive text and 56 high resolution illustrations, including detailed schematics, artist’s impressions, and speculative color profiles of these remarkable secret aircraft projects. This is the author’s second book covering the USN convoy fighter competition, the first one being devoted to the Goodyear GA-28A/B, also available in the Google Play store and other bookstores worldwide.
Download or read book Convair Class VF Convoy Fighter written by Jared A Zichek and published by . This book was released on 2017-03-31 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the original proposal for the Convair Class VF Convoy Fighter, which led to the XFY-1 Pogo turboprop tailsitter naval aircraft of the early 1950s. Also included are 2 Army observation VTOL tailsitters from 1955 and the Gamby Vertigo of 1933. This book features 45 images, including rare photos, blueprints, illustrations, and color profiles.
Download or read book The Boeing XF8B 1 Fighter written by Jared A. Zichek and published by Schiffer Pub Limited. This book was released on 2006-11-22 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Boeing XF8B-1 "Five-in-One" fighter was the last piston engine fighter built by Boeing and very nearly the last fighter built by the company until its merger with McDonnell Douglas in 1997. Conceived in 1943, the XF8B-1 was unusual for a naval fighter in having an internal bomb bay, tremendous range, and counter-rotating propellers, the latter necessitated by its huge Pratt & Whitney R-4360 "Wasp Major" engine, a 28-cylinder air-cooled radial that produced a staggering 3,500 hp. An exhaustive account based on extensive research at the National Archives and Boeing Historical Archive, this book contains an authoritative text along with hundreds of rare photos, general arrangement drawings, color profiles, artist's impressions, and extensive extracts from the pilot's and maintenance manuals.
Download or read book American Flying Boats and Amphibious Aircraft written by E.R. Johnson and published by McFarland. This book was released on 2016-03-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a comprehensive, heavily illustrated history of the many flying boats and amphibious aircraft designed and built in the United States. It is divided into three chronological sections: the early era (1912–1928), the golden era (1928–1945), and the post-war era (1945–present), with historical overviews of each period. Within each section, individual aircraft types are listed in alphabetical order by manufacturer or builder, with historical background, technical specifications, drawings, and one or more photographs. Appendices cover lesser known flying boat and amphibian types as well as various design concepts that never achieved the flying stage.
Download or read book Flying Wings and Tailless Aircraft written by Bill Rose and published by Secret Projects. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an exciting new addition to the highly successful Secret Projects series, which examines some extraordinary flying wings and tailless aircraft projects. Designed and developed since the dawn of aviation, these aircraft still hold a great importance today, with many aviation enthusiasts eager to learn more about these remarkable aircraft, which provided the foundations for the modern aviation scene. Beginning with an analysis of the advantages of the flying wing, the author looks at why aerodynamicists have been attracted to this unique configuration since the earliest days of manned flight, highlighting a range of specific aircraft and relevant examples. Many aviation enthusiasts will delight in discovering the more intimate developmental details of familiar aircraft including the famous early glider Junkers and other World War 1 flying wing biplane designs.
Download or read book Aircraft of The Royal Australian Air Force written by Air Force History Branch and published by Simon and Schuster. This book was released on 2021-06-01 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft of The Royal Australian Air Force tells the story of the RAAF’s first one hundred years by describing the acquisition, operation, and service record of the multitude of aircraft types flown by the RAAF. The 176 aircraft types include the flimsy wood and canvas aircraft typical of World War I, through the technological advances during and after World War II, to modern fifth-generation, complex aircraft like the F-35 Lightning II. Even before its formation Sir Richard Williams, the Father of the RAAF, had decided to employ an alpha-numeric numbering system to identify and account for each aircraft in service. This system started with A1, A2, A3 etc as each type of aircraft came into service. Each individual aircraft within each series was identified as A1-1, A1-2 and so on and the aircraft serial became known colloquially as the ‘A-number’. With some exceptions over the century since the A-number system started, aircraft entered RAAF service in broadly the sequence of the A-numbers, and so this book is intended to assist in charting the 100-year history of the RAAF by listing aircraft operated in A-number sequence, rather than by listing them by role (such as Fighter, Bomber, Maritime, Trainer, Transport etc) or alphabetically by name or by manufacturer. The inclusion of a comprehensive Index and the Quick Reference Guide to aircraft by role is intended to facilitate the location of the entry for any specific type of aircraft for those who may not already know its A-number. Aircraft of The Royal Australian Air Force is a must have for all those who have served in the RAAF, those with a passion for military aviation and aircraft in general, and the broader members of the public wishing to gain an appreciation of the Royal Australian Air Force in its centenary year.
Download or read book Introduction to UAV Systems written by Paul G. Fahlstrom and published by John Wiley & Sons. This book was released on 2012-07-11 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned aerial vehicles (UAVs) have been widely adopted in the military world over the last decade and the success of these military applications is increasingly driving efforts to establish unmanned aircraft in non-military roles. Introduction to UAV Systems, 4th edition provides a comprehensive introduction to all of the elements of a complete Unmanned Aircraft System (UAS). It addresses the air vehicle, mission planning and control, several types of mission payloads, data links and how they interact with mission performance, and launch and recovery concepts. This book provides enough information to encourage a student to learn more; to provide a specialist with a basic appreciation of the technical issues that drive other parts of the system and interact with their specialty; or to help a program manager understand system-level tradeoffs and know what questions to ask. Key features: Comprehensive overview of all elements of a UAS and of how they interact. Introduces the underlying concepts of key subsystems. Emphasizes system-integration issues and how they relate to subsystem design choices. Practical discussion of issues informed by lessons learned in UAV programs. Introduction to UAV Systems, 4th edition is written both for newcomers to the subject and for experienced members of the UAV community who desire a comprehensive overview at the system level. As well as being a primary text for an introductory course on UAS or a supplementary text in a course that goes into more depth in one of the individual technologies involved in a UAS, this book is a useful overview for practicing engineers, researchers, managers, and consultants interested in UAV systems.
Download or read book Air Mech Strike written by BG (R) David L. Grange and published by Turner Publishing Company. This book was released on 2002-01-01 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines how to reorganize the U.S. Army into a fully 2 and 3-Dimensional maneuver capable, ground force with terrain-agile, armored fighting vehicles sized to rapidly deploy by fixed-wing and rotary-wing aircraft to the scene of world conflicts and strike at the heart of freedom‚s enemies. The plan to build the Army into Air-Mech-Strike Forces, exploiting emerging information-age technologies, as well as America‚s supremacy in aircraft and helicopter delivery systems---at the lowest cost to the taxpayers, is described in detail. These Army warfighting organizations, using existing and some newly purchased equipment, will shape the battlefield to America‚s advantage, preserving the peace before it is lost; if not, then winning fights that must be fought quickly. The dangerous world we live in moves by the speed of the AIR, and the 21st Century U.S. Army 2D/3D combat team will dominate this medium by Air-Mech-Strike!
Download or read book Lockheed Model L 200 Convoy Fighter written by Jared A Zichek and published by . This book was released on 2017-06-08 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the original proposal for the Lockheed Model L-200 Convoy Fighter of 1950, which led to the experimental XFV-1 Salmon turboprop tailsitter naval aircraft. Covers previously unpublished variants and equipment options in great detail. This book features 70 images, including rare photos, blueprints, illustrations, and color profiles.
Download or read book Trademarks and product names section written by United States. Environmental Protection Agency. Office of Toxic Substances and published by . This book was released on 1979 with total page 1202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aircraft Propulsion and Gas Turbine Engines written by Ahmed F. El-Sayed and published by CRC Press. This book was released on 2017-07-06 with total page 1448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Propulsion and Gas Turbine Engines, Second Edition builds upon the success of the book’s first edition, with the addition of three major topic areas: Piston Engines with integrated propeller coverage; Pump Technologies; and Rocket Propulsion. The rocket propulsion section extends the text’s coverage so that both Aerospace and Aeronautical topics can be studied and compared. Numerous updates have been made to reflect the latest advances in turbine engines, fuels, and combustion. The text is now divided into three parts, the first two devoted to air breathing engines, and the third covering non-air breathing or rocket engines.
Download or read book Official U S Bulletin written by and published by . This book was released on 1917 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Convair XFY 1 Pogo written by Skeets Coleman and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1947, both the U.S. Air Force and the U.S. Navy sponsored VTOL design studies called project Hummingbird. The rapid development of increasingly powerful powerplants had reached the point where a true VTOL aircraft was in the realm of possibility. The U.S. Navy's firsthand experiences with Japan's Kamikaze taught them the vulnerability of their great mobile peacekeepers, the carrier. Because of this experience the Navy felt that the only way to protect any naval presence in enemy waters was to equip all ships with a VTOL fighter.
Download or read book Aircraft Landing Gear Design written by Norman S. Currey and published by AIAA. This book was released on 1988 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only book available today that covers military and commercial aircraft landing gear design. It is a comprehensive text that will lead students and engineers from the initial concepts of landing gear design through final detail design. The book provides a vital link in landing gear design technology from historical practices to modern design trends, and it considers the necessary airfield interface with landing gear design. The text is backed up by calculations, specifications, references, working examples.
Download or read book Understanding Flight written by David W. Anderson and published by McGraw Hill Professional. This book was released on 2000-12-27 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The simplest, most intuitive book on the toughest lessons of flight--addresses the science of flying in terms, explanations, and illustrations that make sense to those who most need to understand: those who fly. Debunks long-rooted misconceptions and offers a clear, minimal-math presentation that starts with how airplanes fly and goes on to clarify a diverse range of topics, such as design, propulsion, performance, high-speed flight, and flight testing. Not-to-be missed insights for pilots, instructors, flight students, aeronautical engineering students, and flight enthusiasts.
