Download or read book Global Roadmap for Ceramic and Glass Technology written by Stephen W. Freiman and published by John Wiley & Sons. This book was released on 2007-06-29 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only global roadmap that identifies the technical and manufacturing challenges associated with the development and expansion of commercial markets for ceramics and glass. Featuring presentations by industry leaders at the 1st International Congress on Ceramics (ICC) held in 2006, it suggests positive, proactive ways to address these challenges. The ICC Global Roadmap contains the following content: 1) Summary papers prepared by the invited speakers before the meeting 2) A detailed account of the presentation of each invited speaker written by an editor who attends the presentation 3) A summary account and future recommendations for the industry on each topic covered written by the board and the president of this meeting, Dr. Stephen Freiman (National Institutes of Standards and Technology) 4) The CDRom accompanying the book contains all of the above as well as pdfs of the presentations for non-invited speakers, including posters presented and discussed.
Download or read book Global roadmap for ceramics written by Alida Bellosi and published by CNR Edizioni. This book was released on 2008 with total page 833 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Global Roadmap for Ceramic and Glass Technology Cd rom written by Mrityunjay Singh and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 1st International Congress on Ceramics written by Stephen Freiman and published by Wiley-American Ceramic Society. This book was released on 2006-11-20 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only global roadmap that identifies the technical and manufacturing challenges associated with the development and expansion of commercial markets for ceramics and glass. Featuring presentations by industry leaders at the 1st International Congress on Ceramics (ICC) held in 2006, it suggests positive, proactive ways to address these challenges. The ICC Global Roadmap contains the following content: 1) Summary papers prepared by the invited speakers before the meeting 2) A detailed account of the presentation of each invited speaker written by an editor who attends the presentation 3) A summary account and future recommendations for the industry on each topic covered written by the board and the president of this meeting, Dr. Stephen Freiman (National Institutes of Standards and Technology) 4) The CDRom accompanying the book contains all of the above as well as pdfs of the presentations for non-invited speakers, including posters presented and discussed.
Download or read book Ceramics Science and Technology Volume 3 written by Ralf Riedel and published by John Wiley & Sons. This book was released on 2011-12-15 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although ceramics have been known to mankind literally for millennia, research has never ceased. Apart from the classic uses as a bulk material in pottery, construction, and decoration, the latter half of the twentieth century saw an explosive growth of application fields, such as electrical and thermal insulators, wear-resistant bearings, surface coatings, lightweight armour, or aerospace materials. In addition to plain, hard solids, modern ceramics come in many new guises such as fabrics, ultrathin films, microstructures and hybrid composites. Built on the solid foundations laid down by the 20-volume series Materials Science and Technology, Ceramics Science and Technology picks out this exciting material class and illuminates it from all sides. Materials scientists, engineers, chemists, biochemists, physicists and medical researchers alike will find this work a treasure trove for a wide range of ceramics knowledge from theory and fundamentals to practical approaches and problem solutions.
Download or read book Engineered Ceramics written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2016-02-01 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book project, all the American Ceramic Society's Engineering Ceramics Division Mueller and Bridge Building Award Winners, the ICACC Plenary Speakers and the past Engineering Ceramics Division Chairs have been invited to write book chapters on a topic that is compatible with their technical interests and consistent with the scope of the book, which is to focus on the current status and future prospects of various technical topics related to engineering ceramics, advanced ceramics and composite materials. Topics include: Mechanical Behavior and Performance of Ceramics & Composites Non-Destructive Evaluation and Mechanical Testing of Engineering Ceramics Brittle and Composite Material Design Modern Fracture Mechanics of Ceramics Thermal/Environmental Barrier Coatings Advanced Ceramic Coatings for Functional Applications Advanced Ceramic Joining Technologies Ceramics for Machining, Friction, Wear, and Other Tribological Applications Ceramic Composites for High-Temperature Aerospace Structures and Propulsion Systems Thermal Protection Materials: From Retrospect to Foresight Carbon/Carbon Composites Ceramic-Matrix Composites for Lightweight Construction Ultra High-Temperature Ceramics (UHTC) Nanolaminated Ternary Carbides and Nitrides (MAX Phases) Ceramics for Heat Engine and Other Energy Related Applications Solid Oxide Fuel Cells (SOFC) Armor Ceramics Next Generation Bioceramics Ceramics for Innovative Energy and Storage Systems Designing Ceramics for Electrochemical Energy Storage Devices Nanostructured Materials and Nanotechnology Advanced Ceramic Processing and Manufacturing Technologies Engineering Porous Ceramics Thermal Management Materials and Technologies Geopolymers Advanced Ceramic Sensor Technology Advanced Ceramics and Composites for Nuclear and Fusion Applications Advanced Ceramic Technologies for Rechargeable Batteries
Download or read book Ceramics Science and Technology Volume 4 written by Ralf Riedel and published by John Wiley & Sons. This book was released on 2013-08-05 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although ceramics have been known to mankind literally for millennia, research has never ceased. Apart from the classic uses as a bulk material in pottery, construction, and decoration, the latter half of the twentieth century saw an explosive growth of application fields, such as electrical and thermal insulators, wear-resistant bearings, surface coatings, lightweight armour, and aerospace materials. In addition to plain, hard solids, modern ceramics come in many new guises such as fabrics, ultrathin films, microstructures and hybrid composites. Built on the solid foundations laid down by the 20-volume series Materials Science and Technology, Ceramics Science and Technology picks out this exciting material class and illuminates it from all sides. Materials scientists, engineers, chemists, biochemists, physicists and medical researchers alike will fi nd this work a treasure trove for a wide range of ceramics knowledge from theory and fundamentals to practical approaches and problem solutions.
Download or read book Sintering Technology written by Randall M. German and published by CRC Press. This book was released on 2020-09-30 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the sintering conference held at the Pennsylvania State University, USA, this text presents advances in the application of sintering to the most important industrial materials. It offers results on both solid-state and microphase sintering as well as microstructure evolution, and introduces new applications, processes, materials and solutions to technical problems.
Download or read book Modern Ceramic Engineering written by David W. Richerson and published by CRC Press. This book was released on 2018-04-27 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of its Third Edition, there have been many notable advances in ceramic engineering. Modern Ceramic Engineering, Fourth Edition serves as an authoritative text and reference for both professionals and students seeking to understand key concepts of ceramics engineering by introducing the interrelationships among the structure, properties, processing, design concepts, and applications of advanced ceramics. Written in the same clear manner that made the previous editions so accessible, this latest edition has been expanded to include new information in almost every chapter, as well as two new chapters that present a variety of relevant case studies. The new edition now includes updated content on nanotechnology, the use of ceramics in integrated circuits, flash drives, and digital cameras, and the role of miniaturization that has made our modern digital devices possible, as well as information on electrochemical ceramics, updated discussions on LEDs, lasers and optical applications, and the role of ceramics in energy and pollution control technologies. It also highlights the increasing importance of modeling and simulation.
Download or read book High Temperature Ceramic Matrix Composites 8 written by Litong Zhang and published by John Wiley & Sons. This book was released on 2014-06-09 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains 78 papers from the 8th International Conference on High Temperature Ceramic Matrix Composites, held September 22-26, 2013 in Xi'an, Shaanxi, China. Chapters include: Ceramic Genome, Computational Modeling, and Design Advanced Ceramic Fibers, Interfaces, and Interphases Nanocomposite Materials and Systems Polymer Derived Ceramics and Composites Fiber Reinforced Ceramic MatrixComposites Carbon-Carbon Composites: Materials, Systems, and Applications Ultra High Temperature Ceramics and MAX Phase Materials Thermal and Environmental Barrier Coatings
Download or read book Modern Gas Turbine Systems written by Peter Jansohn and published by Elsevier. This book was released on 2013-08-31 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern gas turbine power plants represent one of the most efficient and economic conventional power generation technologies suitable for large-scale and smaller scale applications. Alongside this, gas turbine systems operate with low emissions and are more flexible in their operational characteristics than other large-scale generation units such as steam cycle plants. Gas turbines are unrivalled in their superior power density (power-to-weight) and are thus the prime choice for industrial applications where size and weight matter the most. Developments in the field look to improve on this performance, aiming at higher efficiency generation, lower emission systems and more fuel-flexible operation to utilise lower-grade gases, liquid fuels, and gasified solid fuels/biomass. Modern gas turbine systems provides a comprehensive review of gas turbine science and engineering. The first part of the book provides an overview of gas turbine types, applications and cycles. Part two moves on to explore major components of modern gas turbine systems including compressors, combustors and turbogenerators. Finally, the operation and maintenance of modern gas turbine systems is discussed in part three. The section includes chapters on performance issues and modelling, the maintenance and repair of components and fuel flexibility. Modern gas turbine systems is a technical resource for power plant operators, industrial engineers working with gas turbine power plants and researchers, scientists and students interested in the field. Provides a comprehensive review of gas turbine systems and fundamentals of a cycle Examines the major components of modern systems, including compressors, combustors and turbines Discusses the operation and maintenance of component parts
Download or read book Materials for Biomedical Engineering Bioactive Materials for Antimicrobial Anticancer and Gene Therapy written by Alexandru Grumezescu and published by Elsevier. This book was released on 2019-06-28 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Biomedical Engineering: Bioactive Materials for Antimicrobial, Anticancer, and Gene Therapy offers an up-to-date perspective on recent research findings regarding the application and use of these materials for disease treatment and prevention. Various types of currently investigated bioactive materials, including therapeutic nanostructures and antimicrobial hydrogels are discussed, as are their properties, impact and future role in therapeutic applications. The book will be extremely useful for new researchers who want to explore more information on the use of bioactive materials or for more experienced researchers who are interested in new trends and specific applications. Provides knowledge on the range of bioactive materials available, enabling the reader to make optimal materials selection decisions Contains detailed information on current and proposed applications of the latest bioactive materials to empower readers to design innovative products and processes Presents a strong emphasis on chemistry and the physico-chemical characterization of these materials and their application in antimicrobial, anticancer and gene therapy
Download or read book Handbook of Recycled Concrete and Demolition Waste written by F. Pacheco-Torgal and published by Elsevier. This book was released on 2013-09-30 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The civil engineering sector accounts for a significant percentage of global material and energy consumption and is a major contributor of waste material. The ability to recycle and reuse concrete and demolition waste is critical to reducing environmental impacts in meeting national, regional and global environmental targets. Handbook of recycled concrete and demolition waste summarises key recent research in achieving these goals. Part one considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants and the economics of managing construction and demolition waste. Part two reviews key steps in handling construction and demolition waste. It begins with a comparison between conventional demolition and construction techniques before going on to discuss the preparation, refinement and quality control of concrete aggregates produced from waste. It concludes by assessing the mechanical properties, strength and durability of concrete made using recycled aggregates. Part three includes examples of the use of recycled aggregates in applications such as roads, pavements, high-performance concrete and alkali-activated or geopolymer cements. Finally, the book discusses environmental and safety issues such as the removal of gypsum, asbestos and alkali-silica reaction (ASR) concrete, as well as life-cycle analysis of concrete with recycled aggregates. Handbook of recycled concrete and demolition waste is a standard reference for all those involved in the civil engineering sector, as well as academic researchers in the field. Summarises key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts and meet national, regional and global environmental targets Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants Reviews key steps in handling construction and demolition waste
Download or read book Advances in brazing written by R. Asthana and published by Elsevier Inc. Chapters. This book was released on 2013-03-04 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced ceramic-matrix composites (CMCs) outperform traditional ceramics in many ways and have shown potential for demanding applications. Net-shape manufacture of CMC parts is challenging, and many advanced applications demand robust and reliable integration technologies such as brazing. Brazing of CMC/metal joints is reviewed, highlighting scientific issues together with a discussion of some of the challenges that brazing of CMCs presents. Brazing practices for SiC–SiC, C–SiC, C–C, ZrB2-based ultra-high-temperature composites, and oxide, nitride and silicate-based composites are presented. Recent research results on interface microstructure, composition and properties are discussed. Scaling effects, time–temperature–environment dependent thermomechanical properties, design guidelines and life-prediction analyses, and tools for CMC/metal joints to be used in structures constitute future research imperatives.
Download or read book Surgery of the Hip E Book written by Daniel J. Berry and published by Elsevier Health Sciences. This book was released on 2012-12-07 with total page 1355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surgery of the Hip is your definitive, comprehensive reference for hip surgery, offering coverage of state-of-the-art procedures for both adults and children. Modelled after Insall & Scott Surgery of the Knee, it presents detailed guidance on the latest approaches and techniques, so you can offer your patients - both young and old - the best possible outcomes. Consult this title on your favorite e-reader, conduct rapid searches, and adjust font sizes for optimal readability. Compatible with Kindle®, nook®, and other popular devices. Master the latest methods such as the use of fixation devices for proximal femoral fractures, hip preservation surgery, and problems with metal on metal-bearing implants. Make optimal use of the latest imaging techniques, surgical procedures, equipment, and implants available. Navigate your toughest clinical challenges with vital information on total hip arthroplasty, pediatric hip surgery, trauma, and hip tumor surgery. Browse the complete contents online, view videos of select procedures, and download all the images at www.expertconsult.com!
Download or read book Frattura ed Integrit Strutturale Annals 2013 written by AA.VV. and published by Gruppo Italiano Frattura. This book was released on 2013-12-31 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frattura ed Integrità Strutturale (Fracture and Structural Integrity) is the official Journal of the Italian Group of Fracture (ISSN 1971-8993). It is an open-access Journal published on-line every three months (July, October, January, April). Frattura ed Integrità Strutturale encompasses the broad topic of structural integrity, which is based on the mechanics of fatigue and fracture, and is concerned with the reliability and effectiveness of structural components. The aim of the Journal is to promote works and researches on fracture phenomena, as well as the development of new materials and new standards for structural integrity assessment. The Journal is interdisciplinary and accepts contributions from engineers, metallurgists, materials scientists, physicists, chemists, and mathematicians.
Download or read book Nanostructured Materials and Systems written by Sanjay Mathur and published by John Wiley & Sons. This book was released on 2010-09-21 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium on Nanostructured Materials and Systems was held during the 8th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM 8) from May 31-June 5, 2009 in Vancouver, Canada. This symposium aimed to review the progress in the state-of-the-art of nanoscience and nanotechnology including synthesis, processing, modeling, applications and assessment of toxicological potential of nanomatter. More than 55 contributions (invited talks, oral presentations, and posters), were presented by participants, from all over the world, representing universities, research institutions, and industry which made this symposium an attractive forum for interdisciplinary presentations and discussions and to elaborate their functional diversity. This issue contains 16 peer-reviewed papers (invited and contributed) incorporating the latest developments related to synthesis, processing and manufacturing technologies of nanoscaled materials and systems including one-dimensional nanostructures, nanoparticle-based composites, electrospinning of nanofibers, functional thin films, ceramic membranes, bioactive materials and self-assembled functional nanostructures and nanodevices. These papers discuss several important aspects related to fabrication and engineering issues necessary for understanding and further development of processing and manufacturing of nanostructured materials and systems.