Download or read book Getting Started with the Internet of Things written by Cuno Pfister and published by "O'Reilly Media, Inc.". This book was released on 2011-05-24 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This hands-on introductory guide will quickly show how to program embedded devices using the .NET Micro Framework and the Netduino Plus board, and then connect these devices to the Internet using Pachube, a cloud platform for sharing real-time sensor data.

Download or read book Getting Started With The IOT written by Midhun Moorthi C and published by Academic Guru Publishing House. This book was released on 2023-09-01 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term "Internet of Things development" is used to describe the process of developing, deploying, and maintaining IoT systems. The process includes setting up the configurations and writing the code for an IoT solution's software and hardware components. The disciplines of security, hardware device programming, cloud programming, systems engineering, networking, and many more may intersect with the development of the Internet of Things. To effectively build and manage IoT solutions, developers must work closely with a wide range of specialists working under the IoT development umbrella and with the other stakeholders. High-quality, resilient, user-friendly, scalable, and secure IoT solutions are essential. However, there are difficulties in developing the Internet of Things. Cybercriminals may target a far larger number of devices in an IoT network. A single compromised IoT device might leave the whole network vulnerable. The rising number of cyberattacks demonstrates the critical need to protect the Internet of Things. IoT networks are vulnerable due to the absence of reliable security measures for the IoT platforms, unprotected interfaces, including unencrypted data transfer between connected devices.

Download or read book Getting Started for Internet of Things with Launch Pad and ESP8266 written by Rajesh Singh and published by CRC Press. This book was released on 2022-09-01 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Getting Started for Internet of Things with Launch Pad and ESP8266 provides a platform to get started with the Ti launch pad and IoT modules for Internet of Things applications. The book provides the basic knowledge of Ti launch Pad and ESP8266 based customized modules with their interfacing, along with the programming.The book discusses the application of Internet of Things in different areas. Several examples for rapid prototyping are included, this to make the readers understand the concept of IoT.The book comprises of twenty-seven chapters, which are divided into four sections and which focus on the design of various independent prototypes. Section-A gives a brief introduction to Ti launch pad (MSP430) and Internet of Things platforms like GPRS, NodeMCU and NuttyFi (ESP8266 customized board), and it shows steps to program these boards. Examples on how to interface these boards with display units, analog sensors, digital sensors and actuators are also included, this to make reader comfortable with the platforms. Section-B discusses the communication modes to relay the data like serial out, PWM and I2C. Section-C explores the IoT data loggers and shows certain steps to design and interact with the servers. Section-D includes few IoT based case studies in various fields. This book is based on the practical experience of the authors while undergoing projects with students and partners from various industries.

Download or read book Getting Started with Python for the Internet of Things written by Tim Cox and published by Packt Publishing Ltd. This book was released on 2019-02-26 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build clever, collaborative, and powerful automation systems with the Raspberry Pi and Python. Key FeaturesCreate your own Pi-Rover or Pi-Hexipod robotsDevelop practical applications in Python using Raspberry PiBuild your own Jarvis, a highly advanced computerized AIBook Description This Learning Path takes you on a journey in the world of robotics and teaches you all that you can achieve with Raspberry Pi and Python. It teaches you to harness the power of Python with the Raspberry Pi 3 and the Raspberry Pi zero to build superlative automation systems that can transform your business. You will learn to create text classifiers, predict sentiment in words, and develop applications with the Tkinter library. Things will get more interesting when you build a human face detection and recognition system and a home automation system in Python, where different appliances are controlled using the Raspberry Pi. With such diverse robotics projects, you'll grasp the basics of robotics and its functions, and understand the integration of robotics with the IoT environment. By the end of this Learning Path, you will have covered everything from configuring a robotic controller, to creating a self-driven robotic vehicle using Python. Raspberry Pi 3 Cookbook for Python Programmers - Third Edition by Tim Cox, Dr. Steven Lawrence FernandesPython Programming with Raspberry Pi by Sai Yamanoor, Srihari YamanoorPython Robotics Projects by Prof. Diwakar VaishWhat you will learnBuild text classifiers and predict sentiment in words with the Tkinter libraryDevelop human face detection and recognition systemsCreate a neural network module for optical character recognitionBuild a mobile robot using the Raspberry Pi as a controllerUnderstand how to interface sensors, actuators, and LED displays workApply machine learning techniques to your modelsInterface your robots with BluetoothWho this book is for This Learning Path is specially designed for Python developers who want to take their skills to the next level by creating robots that can enhance people’s lives. Familiarity with Python and electronics will aid understanding the concepts in this Learning Path.

Download or read book Getting Started with Secure Embedded Systems written by Alexandru Radovici and published by Apress. This book was released on 2022-01-02 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build secure and reliable IoT applications for micro:bit and Raspberry Pi Pico by using Rust and Tock. One of the first Operating Systems written in Rust, Tock is designed to safely run multiple applications on low power devices, enabling you to build a secure foundation for IoT systems. It is an open-source OS that has recently gained popularity as companies such as Google[1] explore and integrate it into their products. This book guides you through the steps necessary to customize and integrate Tock into your devices. First, you'll explore the characteristics of Tock and how to run it on two of the most popular IoT platforms: micro:bit and Raspberry Pi Pico. You’ll also take a look at Rust and how to use it for building secure applications with Tock. The book focuses on the Tock kernel internals and presents the steps necessary to integrate new features. From simple drivers to the more complex asynchronous ones, you are provided with a detailed description of the Tock kernel API. Next, you'll review the Tock applications framework for C. Starting from simple Tock APIs to the more complex Inter-Process Communication system, this book provides a complete overview of the Tock application ecosystem. By taking a practical approach, Getting Started with Secure Embedded Systems provides a starting point for building a secure IoT foundation using the Tock Operating System. You will: Use Rust for embedded systems development Write applications and drivers for Tock Customize the Tock kernel for specific hardware platforms Set a solid base for building secure and reliable IoT applications Use Tock to ensure the security of your microcontrollers and integrate them into your projects Manage products that rely on Tock Who This Book Is For IoT system designers, developers, and integrators who are familiar with operating systems concepts. The book can also be suitable for people with less experience, who want to gain an overview of the latest hardware and software technologies related to building secure IoT systems.

Download or read book Programming the Internet of Things written by Andy King and published by "O'Reilly Media, Inc.". This book was released on 2021-06-10 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to program the Internet of Things with this hands-on guide. By breaking down IoT programming complexities in step-by-step, building-block fashion, author and educator Andy King shows you how to design and build your own full-stack, end-to-end IoT solution--from device to cloud. This practical book walks you through tooling, development environment setup, solution design, and implementation. You'll learn how a typical IoT ecosystem works, as well as how to tackle integration challenges that crop up when implementing your own IoT solution. Whether you're an engineering student learning the basics of the IoT, a tech-savvy executive looking to better understand the nuances of IoT technology stacks, or a programmer building your own smart house solution, this practical book will help you get started. Design an end-to-end solution that implements an IoT use case Set up an IoT-centric development and testing environment Organize your software design by creating abstractions in Python and Java Use MQTT, CoAP, and other protocols to connect IoT devices and services Create a custom JSON-based data format that's consumable across a range of platforms and services Use cloud services to support your IoT ecosystem and provide business value for stakeholders

Download or read book Getting Started with Python for the Internet of Things written by Tim Cox and published by Packt Publishing Ltd. This book was released on 2019-02-26 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build clever, collaborative, and powerful automation systems with the Raspberry Pi and Python. Key FeaturesCreate your own Pi-Rover or Pi-Hexipod robotsDevelop practical applications in Python using Raspberry PiBuild your own Jarvis, a highly advanced computerized AIBook Description This Learning Path takes you on a journey in the world of robotics and teaches you all that you can achieve with Raspberry Pi and Python. It teaches you to harness the power of Python with the Raspberry Pi 3 and the Raspberry Pi zero to build superlative automation systems that can transform your business. You will learn to create text classifiers, predict sentiment in words, and develop applications with the Tkinter library. Things will get more interesting when you build a human face detection and recognition system and a home automation system in Python, where different appliances are controlled using the Raspberry Pi. With such diverse robotics projects, you'll grasp the basics of robotics and its functions, and understand the integration of robotics with the IoT environment. By the end of this Learning Path, you will have covered everything from configuring a robotic controller, to creating a self-driven robotic vehicle using Python. Raspberry Pi 3 Cookbook for Python Programmers - Third Edition by Tim Cox, Dr. Steven Lawrence FernandesPython Programming with Raspberry Pi by Sai Yamanoor, Srihari YamanoorPython Robotics Projects by Prof. Diwakar VaishWhat you will learnBuild text classifiers and predict sentiment in words with the Tkinter libraryDevelop human face detection and recognition systemsCreate a neural network module for optical character recognitionBuild a mobile robot using the Raspberry Pi as a controllerUnderstand how to interface sensors, actuators, and LED displays workApply machine learning techniques to your modelsInterface your robots with BluetoothWho this book is for This Learning Path is specially designed for Python developers who want to take their skills to the next level by creating robots that can enhance people’s lives. Familiarity with Python and electronics will aid understanding the concepts in this Learning Path.

Download or read book Programming the Photon Getting Started with the Internet of Things written by Christopher Rush and published by McGraw Hill Professional. This book was released on 2016-04-08 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Explore the Internet of Things and build useful, functioning Photon projects Quickly learn to construct your own electronics devices and control them over the Internet with help from this DIY guide. Programming the Photon: Getting Started with the Internet of Things features clear explanations and step-by-step examples that use inexpensive, easy-to-find components. Discover how to connect to Wi-Fi networks, attach hardware to I/O ports, write custom programs, and work from the cloud. You will learn how to troubleshoot and tweak your Photon creations—even interface with social media sites! · Set up your Photon board and connect to the Particle cloud · Start constructing and programming custom IoT projects · Learn the syntax of both the C and Arduino languages · Incorporate switches, sensors, and other input devices · Control hardware through the Photon’s outputs · Control your creations through the Internet · Add functions with Particle shields and add-on boards · Link real-time data to your board via the IFTTT Web Service · Integrate with websites—Facebook, Twitter, Gmail, and more!

Download or read book Practical Python Programming for IoT written by Gary Smart and published by Packt Publishing Ltd. This book was released on 2020-11-12 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leverage Python and Raspberry Pi to create complex IoT applications capable of creating and detecting movement and measuring distance, light, and a host of other environmental conditions Key FeaturesLearn the fundamentals of electronics and how to integrate them with a Raspberry PiUnderstand how to build RESTful APIs, WebSocket APIs, and MQTT-based applicationsExplore alternative approaches to structuring IoT applications with PythonBook Description The age of connected devices is here, be it fitness bands or smart homes. It's now more important than ever to understand how hardware components interact with the internet to collect and analyze user data. The Internet of Things (IoT), combined with the popular open source language Python, can be used to build powerful and intelligent IoT systems with intuitive interfaces. This book consists of three parts, with the first focusing on the "Internet" component of IoT. You'll get to grips with end-to-end IoT app development to control an LED over the internet, before learning how to build RESTful APIs, WebSocket APIs, and MQTT services in Python. The second part delves into the fundamentals behind electronics and GPIO interfacing. As you progress to the last part, you'll focus on the "Things" aspect of IoT, where you will learn how to connect and control a range of electronic sensors and actuators using Python. You'll also explore a variety of topics, such as motor control, ultrasonic sensors, and temperature measurement. Finally, you'll get up to speed with advanced IoT programming techniques in Python, integrate with IoT visualization and automation platforms, and build a comprehensive IoT project. By the end of this book, you'll be well-versed with IoT development and have the knowledge you need to build sophisticated IoT systems using Python. What you will learnUnderstand electronic interfacing with Raspberry Pi from scratchGain knowledge of building sensor and actuator electronic circuitsStructure your code in Python using Async IO, pub/sub models, and moreAutomate real-world IoT projects using sensor and actuator integrationIntegrate electronics with ThingSpeak and IFTTT to enable automationBuild and use RESTful APIs, WebSockets, and MQTT with sensors and actuatorsSet up a Raspberry Pi and Python development environment for IoT projectsWho this book is for This IoT Python book is for application developers, IoT professionals, or anyone interested in building IoT applications using the Python programming language. It will also be particularly helpful for mid to senior-level software engineers who are experienced in desktop, web, and mobile development, but have little to no experience of electronics, physical computing, and IoT.

Download or read book Getting Started with Arduino written by Massimo Banzi and published by "O'Reilly Media, Inc.". This book was released on 2011-09-13 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an introduction to the open-source electronics prototyping platform.

Download or read book Programming the Photon Getting Started with the Internet of Things written by Christopher Rush and published by McGraw Hill Professional. This book was released on 2016-04-08 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Explore the Internet of Things and build useful, functioning Photon projects Quickly learn to construct your own electronics devices and control them over the Internet with help from this DIY guide. Programming the Photon: Getting Started with the Internet of Things features clear explanations and step-by-step examples that use inexpensive, easy-to-find components. Discover how to connect to Wi-Fi networks, attach hardware to I/O ports, write custom programs, and work from the cloud. You will learn how to troubleshoot and tweak your Photon creations—even interface with social media sites! · Set up your Photon board and connect to the Particle cloud · Start constructing and programming custom IoT projects · Learn the syntax of both the C and Arduino languages · Incorporate switches, sensors, and other input devices · Control hardware through the Photon’s outputs · Control your creations through the Internet · Add functions with Particle shields and add-on boards · Link real-time data to your board via the IFTTT Web Service · Integrate with websites—Facebook, Twitter, Gmail, and more!

Download or read book Getting Started for Internet of Things with Launch Pad and ESP8266 written by Rajesh Singh and published by CRC Press. This book was released on 2022-09-01 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Getting Started for Internet of Things with Launch Pad and ESP8266 provides a platform to get started with the Ti launch pad and IoT modules for Internet of Things applications. The book provides the basic knowledge of Ti launch Pad and ESP8266 based customized modules with their interfacing, along with the programming.The book discusses the application of Internet of Things in different areas. Several examples for rapid prototyping are included, this to make the readers understand the concept of IoT.The book comprises of twenty-seven chapters, which are divided into four sections and which focus on the design of various independent prototypes. Section-A gives a brief introduction to Ti launch pad (MSP430) and Internet of Things platforms like GPRS, NodeMCU and NuttyFi (ESP8266 customized board), and it shows steps to program these boards. Examples on how to interface these boards with display units, analog sensors, digital sensors and actuators are also included, this to make reader comfortable with the platforms. Section-B discusses the communication modes to relay the data like serial out, PWM and I2C. Section-C explores the IoT data loggers and shows certain steps to design and interact with the servers. Section-D includes few IoT based case studies in various fields. This book is based on the practical experience of the authors while undergoing projects with students and partners from various industries.

Download or read book Internet of Things Programming Projects written by Colin Dow and published by Packt Publishing Ltd. This book was released on 2018-10-31 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical project-based guide to help you build and control your IoT projects Key FeaturesLeverage the full potential of IoT with the combination of Raspberry Pi 3 and PythonBuild complex Python-based applications with IoTWork on various IoT projects and understand the basics of electronicsBook Description The Internet of Things (IOT) has managed to attract the attention of researchers and tech enthusiasts, since it powerfully combines classical networks with instruments and devices. In Internet of Things Programming Projects, we unleash the power of Raspberry Pi and Python to create engaging projects. In the first part of the book, you’ll be introduced to the Raspberry Pi, learn how to set it up, and then jump right into Python programming. Then, you’ll dive into real-world computing by creating a“Hello World” app using flash LEDs. As you make your way through the chapters, you’ll go back to an age when analog needle meters ruled the world of data display. You’ll learn to retrieve weather data from a web service and display it on an analog needle meter, and build a home security system using the Raspberry Pi. The next project has a modern twist, where we employ the Raspberry Pi to send a signal to a web service that will send you a text when someone is at the door. In the final project, you take what you've learned from the previous two projects and create an IoT robot car that you can use to monitor what your pets are up to when you are away. By the end of this book, you will be well versed in almost every possible way to make your IoT projects stand out. What you will learnInstall and set up a Raspberry Pi for IoT developmentLearn how to use a servo motor as an analog needle meter to read dataBuild a home security dashboard using an infrared motion detectorCommunicate with a web service that sends you a message when the doorbell ringsReceive data and display it with an actuator connected to the Raspberry PiBuild an IoT robot car that is controlled through the internetWho this book is for Internet of Things Programming Projects is for Python developers and programmers who are interested in building their own IoT applications and IoT-based projects. It is also targeted at IoT programmers and developers who are looking to build exciting projects with Python.

Download or read book Internet of Things A to Z written by Qusay F. Hassan and published by John Wiley & Sons. This book was released on 2018-06-13 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the Internet of Things’ core concepts, technologies, and applications Internet of Things A to Z offers a holistic approach to the Internet of Things (IoT) model. The Internet of Things refers to uniquely identifiable objects and their virtual representations in an Internet-like structure. Recently, there has been a rapid growth in research on IoT communications and networks, that confirms the scalability and broad reach of the core concepts. With contributions from a panel of international experts, the text offers insight into the ideas, technologies, and applications of this subject. The authors discuss recent developments in the field and the most current and emerging trends in IoT. In addition, the text is filled with examples of innovative applications and real-world case studies. Internet of Things A to Z fills the need for an up-to-date volume on the topic. This important book: Covers in great detail the core concepts, enabling technologies, and implications of the Internet of Things Addresses the business, social, and legal aspects of the Internet of Things Explores the critical topic of security and privacy challenges for both individuals and organizations Includes a discussion of advanced topics such as the need for standards and interoperability Contains contributions from an international group of experts in academia, industry, and research Written for ICT researchers, industry professionals, and lifetime IT learners as well as academics and students, Internet of Things A to Z provides a much-needed and comprehensive resource to this burgeoning field.

Download or read book Getting Started with Bluetooth Low Energy written by Kevin Townsend and published by "O'Reilly Media, Inc.". This book was released on 2014-04-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: With Bluetooth Low Energy (BLE), smart devices are about to become even smarter. This practical guide demonstrates how this exciting wireless technology helps developers build mobile apps that share data with external hardware, and how hardware engineers can gain easy and reliable access to mobile operating systems. This book provides a solid, high-level overview of how devices use BLE to communicate with each other. You’ll learn useful low-cost tools for developing and testing BLE-enabled mobile apps and embedded firmware and get examples using various development platforms—including iOS and Android for app developers and embedded platforms for product designers and hardware engineers. Understand how data is organized and transferred by BLE devices Explore BLE’s concepts, key limitations, and network topology Dig into the protocol stack to grasp how and why BLE operates Learn how BLE devices discover each other and establish secure connections Set up the tools and infrastructure for BLE application development Get examples for connecting BLE to iPhones, iPads, Android devices, and sensors Develop code for a simple device that transmits heart rate data to a mobile device

Download or read book Getting Started with the Photon written by Simon Monk and published by Maker Media, Inc.. This book was released on 2015-05-14 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Photon is an open source, inexpensive, programmable, WiFi-enabled module for building connected projects and prototypes. Powered by an ARM Cortex-M3 microcontroller and a Broadcom WiFi chip, the Photon is just as happy plugged into a hobbyist's breadboard as it is into a product rolling off of an assembly line. While the Photon--and its accompanying cloud platform--is designed as a ready-to-go foundation for product developers and manufacturers, it's great for Maker projects, as you'll see in this book. You'll learn how to get started with the free development tools, deploy your sketches over WiFi, and build electronic projects that take advantage of the Photon's processing power, cloud platform, and input/output pins. What's more, the Photon is backward-compatible with its predecessor, the Spark Core.

Download or read book IoT Inc How Your Company Can Use the Internet of Things to Win in the Outcome Economy written by Bruce Sinclair and published by McGraw Hill Professional. This book was released on 2017-06-02 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grab the top spot in your industry by seizing the power of IoT Smart products are everywhere. They’re in our companies, in our homes, in our pockets. People love these products. But what they love more is what these products do—and for anyone running a business today, outcomes are the key. The Internet of Things (IoT) is the point of connection between products and the results they deliver—it’s where products become software. IoT Inc. explains everything you need to know to position your company within this powerful new network. And once you do, you’ll leave the competition in the dust. Founder and president of today’s leading IoT business consulting firm, Bruce Sinclair has been helping companies develop IoT strategies for a decade—far longer than the term has even existed. This essential guide provides an in-depth look into IoT—how it works and how it is transforming business; methods for seeing your own business, customers, and competitors through the lens of IoT, and a deep dive into how to develop and implement a powerful IoT strategy. IoT isn’t a new business trend. It’s the new way of business. Period. The IoT wave is heading for your industry. You can either meet it head-on, and ride it to success, or you can turn your back and let it swamp you. This is your playbook for transforming your company into a major player in the IoT Outcome economy.