Download or read book Geosynthetics written by David I. Cook and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geosynthetics often play critical roles in civil engineering and it is important that the materials in use can withstand the physical and chemical pressures of the environment. These range from resistance to leachates from landfill to resistance to root damage in soil liners, as well as standard properties such as resistance to creep, oxidation and UV light, and tensile strength. This Rapra Review Report discusses the polymers used in each category of geosynthetics, production methods, test methods and applications. The review is accompanied by around 400 abstracts from papers and books in the Rapra Polymer Library database, to facilitate further reading on this subject.

Download or read book The Application of Geosynthetics in Waterfront Areas written by and published by PIANC. This book was released on 2011 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This report is intended to give public and port authorities, designers and contractors insight in the applications and the limitations of geosynthetics in waterfront structures. It is not a design book, but it should allow the users to quickly evaluate the possible use of a geotextile and to decide if a more detailed design is useful."--Introduction

Download or read book Geotechnical Engineering Handbook Procedures written by Ulrich Smoltczyk and published by John Wiley & Sons. This book was released on 2003-03-14 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of the Handbook covers the geotechnical procedures used in manufacturing anchors and piles as well as for improving or underpinning foundations, securing existing constructions, controlling ground water, excavating rocks and earth works. It also treats such specialist areas as the use of geotextiles and seeding.

Download or read book Geosystems Design Rules and Applications written by Adam Bezuijen and published by CRC Press. This book was released on 2012-11-14 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotextile encapsulated sand elements are three-dimensional systems manufactured from textile materials, non-woven materials or combinations of textile and non-woven materials that are filled with sand on-site. These systems are relatively new and the number of applications is growing in river and coastal engineering. Quite often Geosystems are men

Download or read book Geosynthetics in Civil Engineering written by R W Sarsby and published by Woodhead Publishing. This book was released on 2006-12-22 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geosynthetics are man-made polymer-based materials which facilitate cost effective building, environmental, transportation and other construction projects. Given their versatility, geosynthetics are a vital material in all aspects of civil engineering.The first section of the book covers the fundamentals of geosynthetics. Chapters discuss the design and durability of geosynthetics together with their material properties and international standards governing their use. Building on these foundations, part two examines the various applications of geosynthetics in areas such as filters, separators, landfills, barriers and foundation materials. The book concludes by reviewing methods of quality assurance and the service life of geosynthetics.Written by an international team of contributors, Geosynthetics in civil engineering is an essential reference to all those involved in civil engineering. - Discusses the fundamentals of geosynthetics - Examines various applications in areas such as filters, separators, landfills and foundation materials - Reviews quality assurance and the service life of geosynthetics

Download or read book Recommendations of the Committee for Waterfront Structures Harbours and Waterways written by HTG and published by John Wiley & Sons. This book was released on 2024-01-09 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recommendations have been completely restructured in this 12th (2020) edition of the EAU (10th English edition), the aim being to provide readers with a better, clearer arrangement of the chapters. In addition, the information published in the annual technical reports of the Waterfront Structures Committee since the publication of the 11th German edition have been incorporated in this new edition. The recommendations also take into account the new generation of standards consisting of Eurocode 7, the associated National Application Documents and supplementary national publications (DIN 1054:2010). In isolated instances, partial safety factors differing from those in the codes are specified on the basis of practical experience. Safety standards for ports, harbours and marine structures are therefore upheld. The recommendations satisfy the need for international acceptance in the planning, design, tendering, award of contract, construction, site supervision, acceptance and settlement of accounts for port, harbour and waterway facilities based on uniform approaches.

Download or read book Geotextiles and Geotextile Related Products Characteristics Required for Use in Erosion Control Works Coastal Protection Bank Revetments written by British Standards Institute Staff and published by . This book was released on 1914-02-28 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotextiles, Textile products, Textiles, Construction materials, Erosion, Weather resistance, Migration (chemical), Chemical-resistance tests

Download or read book The Rock Manual written by Construction Industry Research and Information Association and published by . This book was released on 2007 with total page 1312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a summary of good practice on the use of rock in engineering works for rivers, coasts and seas. It has incorporated all the significant advances in knowledge that have occured over the past 10-15 years.

Download or read book Products and Services Catalogue written by and published by . This book was released on 2001 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Textile Advances in the Automotive Industry written by Roshan Shishoo and published by Elsevier. This book was released on 2008-10-20 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive textiles represent one of the most valuable international markets for technical textiles. Textile advances in the automotive industry provides an in-depth review of the design and development of automotive textiles and the recent advances made in technical textiles for a variety of automotive applications.Part one discusses issues such as automotive textile requirements from a car producer's perspective, mapping the automotive textile supply chain, advances in textile fabrics including nonwoven fabrics, and recycling issues. Part two focuses on automotive interiors with chapters on performance and style of interior textiles, materials and design for car seats, and the reduction of interior noise in vehicles. Part three discusses the important safety applications of automotive textiles, including airbags and tyres. Part four concludes by assessing how textiles can be used in automotive bodywork.With its distinguished editor and a team of contributors from both academia and industry, this book is an essential reference for a broad spectrum of readers, ranging from scientists, designers, product development staff to company strategists. - Provides an in-depth review of recent advances in the design and development of automotive textiles - Comprehensively examines the automotive textile industry covering key requirements, the supply chain, fabrics and recycling - Addresses important safety considerations in automotive textiles including airbags and tyres

Download or read book Soil Erosion and Sedimentation Control written by and published by . This book was released on 1981 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stream Corridor Restoration written by and published by National Technical Info Svc. This book was released on 1998 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is a cooperative effort among fifteen Federal agencies and partners to produce a common reference on stream corridor restoration. It responds to a growing national and international interest in restoring stream corridors.

Download or read book Geosynthetics and Geosystems in Hydraulic and Coastal Engineering written by Krystian Pilarczyk and published by CRC Press. This book was released on 2000-01-01 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of the existing applications of geosynthetics and geosystems in hydraulic and coastal engineering, with an overview on material specifications, structural components, relevant tools during conceptual and detail design, possible applications, and execution aspects. A more detailed description is given of new or lesser-known systems and applications. Additional basic information on design methodology and geosynthetics is included to provide a basic framework of information for design purposes.

Download or read book Durability of Geotextiles written by Rilem and published by CRC Press. This book was released on 2004-03-01 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade, the use of geotextiles has increased significantly in a wide range of civil engineering applications: road construction, coastal engineering, stabilization of slopes and retaining structures, reinforcement of foundations, drainage etc. This work focuses on the factors which determine the level of long-term performance of these materials such as their mechanical and physical properties and physico-chemical ageing processes. (It includes contributions to an international seminar held at Saint-Remy-les-Chevreuse, France, in November 1986)

Download or read book Bioengineering for Streambank Erosion Control written by Hollis H. Allen and published by . This book was released on 1997 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Riprap Design Criteria Recommended Specifications and Quality Control written by Peter Frederick Lagasse and published by Transportation Research Board. This book was released on 2006 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 568: Riprap Design Criteria, Recommended Specifications, and Quality Control examines design guidelines; recommended material specifications and test methods; recommended construction specifications; and construction, inspection, and quality control guidelines for riprap for a range of applications, including revetment on streams and riverbanks, bridge piers and abutments, and bridge scour countermeasures such as guide banks and spurs.

Download or read book Encyclopedia of Coastal Science written by Charles W. Finkl and published by Springer. This book was released on 2019-06-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thoroughly revised and expanded edition of the much acclaimed Encyclopedia of Coastal Science edited by M. Schwarz (Springer 2005), presents an interdisciplinary approach that includes biology, ecology, engineering, geology, geomorphology, oceanography, remote sensing, technological advances, and anthropogenic impacts on coasts. Within its covers the Encyclopedia of Coastal Science, 2nd ed. brings together and coordinates many aspects of coastal and related sciences that are widely dispersed in the scientific literature. The broadly interdisciplinary subject matter of this volume features contributions by over 280 well-known international specialists in their respective fields and provides an abundance of figures in full-color with line drawings and photographs, and other illustrations such as satellite images. Not only does this volume offer a large number of new and revised entries, it also includes an illustrated glossary of coastal geomorphology, extensive bibliographic citations, and cross-references. It provides a comprehensive reference work for students, scientific and technical professionals as well as administrators, managers, and informed lay readers. Reviews from the first edition: Awarded for Excellence in Scholarly and Professional Publishing: “Honorable Mention”, in the category Single Volume/Science from the Association of American Publishers (AAP) 2005. "The contents and approach are interdisciplinary and, under a single cover, one finds subjects normally scattered throughout scientific literature." "The topics cover a broad spectrum, so does the geographic range of the contributors. ... besides geomorphologists, biologists, ecologists, engineers, geographers, geologists, oceanographers and technologists will find information related to their respective fields ... . Inclusion of appendices ... is very useful. The illustrated glossary of geomorphology will prove very useful for many of us ... ." Roger H. Charlier, Journal of Coastal Research, Volume 21, Issue 4, Page 866, July 2005. "It is an excellent work that should be included in any carefully selected list of best science reference books of the year "Summing Up: Highly recommended. " M.L. Larsgaard, Choice, Volume 43, Issue 6, Page 989, February 2006. "This volume is a comprehensive collection of articles covering all aspects of the subject: social and economic, engineering, coastal processes, habitats, erosion, geological features, research and observation." ... "As with similar works reviewed, I chose to read articles on familiar topics to see if they covered the expected, and some on unfamiliar topics to see if they could be readily understood. The book passed both tests, but the style is denser and more fact-filled than most of the encyclopedias I have reviewed." John Goodier, Reference Reviews, Volume 20, Issue 2, pages 35-36, 2006