Download or read book Geotechnical Hazards written by Z. Lisac and published by CRC Press. This book was released on 2020-12-18 with total page 1765 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions to this volume examine: geotechnical hazard acknowledging the deversity of local ground conditions and environmental factors which play a decisive role in designing engineering structures in Danubian countries.
Download or read book Modern Geotechnical Design Codes of Practice written by Patrick Arnold and published by IOS Press. This book was released on 2013 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ground is one of the most highly variable of engineering materials. It is therefore not surprising that geotechnical designs depend on local site conditions and local engineering experience. Engineering practices, relating to investigation and design methods site understanding and to safety levels acceptable to society, will therefore vary between different regions.The challenge in geotechnical engineering is to make use of worldwide geotechnical experience, established over many years, to aid in the development and harmonization of geotechnical design codes. Given the significant uncertainties involved, empiricism and engineering
Download or read book Foundation Systems for High Rise Structures written by Rolf Katzenbach and published by CRC Press. This book was released on 2016-09-19 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with the geotechnical analysis and design of foundation systems for high-rise buildings and other complex structures with a distinctive soil-structure interaction. The basics of the analysis of stability and serviceability, necessary soil investigations, important technical regulations and quality and safety assurance are explained and possibilities for optimised foundation systems are given. Additionally, special aspects of foundation systems such as geothermal activated foundation systems and the reuse of existing foundations are described and illustrated by examples from engineering practice.
Download or read book Tunnelling Switzerland written by Georgios Anagnostou and published by vdf Hochschulverlag AG. This book was released on 2013 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Schweiz ist das Tunnelland par excellence: Rund 1300 Tunnel und Stollen prägen das Landschaftsbild. Und laufend kommen neue hinzu. "Tunnelling Switzerland" stellt die Errungenschaften der letzten 15 Jahre auf allen Gebieten des Untertagbaus anhand von mehr als 90 Projekten vor. Dazu gehören u.a. Strassentunnel, Eisenbahntunnel, Tunnelsanierungen, Kraftwerksanlagen, Hochwasserschutzbauten und Leitungstunnel zur Energieerzeugung und Wasserversorgung. Die einzelnen Bauwerke werden jeweils auf einer Doppelseite in Wort und Bild vorgestellt. Dazu kommen Informationen zur Geologie, zu Bauherrschaft, Projektierungsbüros und Unternehmerschaft. Die englischsprachigen Beschriebe werden durch Übersetzungen in die Landessprachen ergänzt. Vorgestellte Tunnel (Auswahl): Gotthard-Basistunnel, Ceneri-Basistunnel, Durchmesserlinie Zürich: Weinbergtunnel, Unterfahrung Hauptbahnhof Zürich, Zimmerberg-Basistunnel, PTS-Tunnel am Flughafen Zürich, Tunnel Engelberg, Le métro lausannois, Tunnel Luzernerring, Uetlibergtunnel A3, Überdeckung Entlisberg A3, Islisbergtunnel, Tunnel Flüelen A4, Sicherheitsstollen Tunnel Flüelen, Tunnel Giswil A8, Tunnel Sachseln A8, Projektübersicht Südumfahrung Visp A9, Milchbucktunnel (Zürich), Tunnel Hausmatt (Olten), Umfahrung Bazenheid, Tunnel routier du Grand Saint Bernard, Erneuerung Tunnel San Bernardino A13, SBB Simplontunnel, Hochwasser-Entlastungsstollen Thunersee, Pumpspeicherwerk Limmern, Pumpspeicherwerk Nant de Drance, Ausbau der Grimselkraftwerke, Wasserkraftwerk Cleuson-Dixence, Trinkwasserstollen Üetliberg, Jungfraujoch – Top of Europe
Download or read book Catalogue of Risks written by Dirk Proske and published by Springer Science & Business Media. This book was released on 2008-07-24 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the German edition of this book, the topic of risk has experienced even greater attention, not only in the world of science but also in other fields, such as economics and politics. Therefore, many new publications have evolved. To keep with the idea of an encyclopedia for the topic of risk, this book has been completely reworked. Not only are many updated examples included in chapter “Risks and disasters” but also new chapters have been introduced, such as the chapter “Indetermination and risk”. This new chapter was developed since the question “Is it possible for risks to be completely eliminated, and if not why?” has become a major point of c- cern. Therefore, especially in this chapter, the focus of the book has - tended from a simple mathematical or engineering point of view to include much broader concepts. Here, not only aspects of system theory have to be considered, but also some general philosophical questions start to inf- ence the considerations of the topic of risk. The main goal of this edition, however, is not only the extension and revision of the book, but also the translation into the English language to allow more readers access to the ideas of the book. The author deeply hopes that the success the book made in the German edition continues and that readers experience a major gain from reading the book.
Download or read book Recommendations of the Committee for Waterfront Structures Harbours and Waterways written by HTG and published by John Wiley & Sons. This book was released on 2024-01-09 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recommendations have been completely restructured in this 12th (2020) edition of the EAU (10th English edition), the aim being to provide readers with a better, clearer arrangement of the chapters. In addition, the information published in the annual technical reports of the Waterfront Structures Committee since the publication of the 11th German edition have been incorporated in this new edition. The recommendations also take into account the new generation of standards consisting of Eurocode 7, the associated National Application Documents and supplementary national publications (DIN 1054:2010). In isolated instances, partial safety factors differing from those in the codes are specified on the basis of practical experience. Safety standards for ports, harbours and marine structures are therefore upheld. The recommendations satisfy the need for international acceptance in the planning, design, tendering, award of contract, construction, site supervision, acceptance and settlement of accounts for port, harbour and waterway facilities based on uniform approaches.
Download or read book Finite Elements in Structural Analysis written by Horst Werkle and published by Springer Nature. This book was released on 2021-05-27 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the basic concepts of the finite element method in the static and dynamic analysis of beam, plate, shell and solid structures, discussing how the method works, the characteristics of a finite element approximation and how to avoid the pitfalls of finite element modeling. Presenting the finite element theory as simply as possible, the book allows readers to gain the knowledge required when applying powerful FEA software tools. Further, it describes modeling procedures, especially for reinforced concrete structures, as well as structural dynamics methods, with a particular focus on the seismic analysis of buildings, and explores the modeling of dynamic systems. Featuring numerous illustrative examples, the book allows readers to easily grasp the fundamentals of the finite element theory and to apply the finite element method proficiently.
Download or read book Recommendations on Piling EA Pf hle written by Geotechnik and published by John Wiley & Sons. This book was released on 2013-12-09 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a complete and detailed overview of piling systems and their application. The design and construction of piled foundations is based on Eurocode 7 and DIN 1054 edition 2010 as well as the European construction codes DIN EN 1536 (Bored piles), DIN EN 12699 (Displacement piles) and DIN EN 14199 (Micropiles). These recommendations also deal with - categorisation of piling systems, - actions on piles from structural loading, negative skin friction and side pressure, - pile resistances from static and dynamic pile test loading as well as extensive tables with the pile load-bearing capacity of nearly all piling systems based on values from practical experience, - pile groups, - performance of static and dynamic test loading and integrity tests, - load-bearing behaviour and verifications for piles under cyclical, dynamic and impact actions - quality assurance for construction. An appendix with numerous calculation examples completes the work. As part of the approval procedure for offshore wind energy structures, the Federal Office for Shipping and Hydrography (BSH) demands verifications according to the new Chapter 13 ("Load-bearing behaviour and verifications for piles under cyclical, dynamical and impact actions") of the EA Pfähle (the recommendations of the Piling working group - 2nd edition), which deals with external pile resistance for the foundations of offshore wind energy structures and the types of verifications to be provided under cyclical actions. The publication of the EA-Pfähle recommendations by the Piling working group of the German Society for Geotechnics (DGGT), which works with the same members as the piling standards committee NA 00-05-07, is intended to provide assistance for engineers active in the design, calculation and construction of piled foundations. The recommendations can thus be considered as rules of the technology and as a supplement to the available codes and standards.
Download or read book Excavations and Foundations in Soft Soils written by Hans-Georg Kempfert and published by Springer Science & Business Media. This book was released on 2006-07-01 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reviews recent developments and research results on excavations and foundations found in and on soft soil deposits. It gives an overview of the material properties of soft soils and offers new foundation improvement techniques in road and railways. It also examines different types of foundations and stabilization methods. The book will serve both practicing and research engineers in the field of geotechnical engineering.
Download or read book On the Variability of Squeezing Behaviour in Tunnelling written by Florence Mezger and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommendations on Excavations written by Deutsche Gesellschaft für Geotechnik and published by John Wiley & Sons. This book was released on 2009-02-05 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of these recommendations is to harmonize and further develop the methods, according to which excavations are prepared, calculated and carried out. Since 1980, these have been drawn up by the working group "Excavations" at the German Geotechnical Society (Deutsche Gesellschaft fur Geotechnik DGGT) and are similar to a set of standards. They help to simplify analysis of excavation enclosures, to unify load approaches and analysis procedures, to guarantee the stability and serviceability of the excavation structure and its individual components, and to find out an economic design of the excavation structure. For this new edition, all recommendations have been reworked in accordance with EN 1997-1 (Eurocode 7) and DIN 1054-1. In addition, new recommendations on the use of the modulus of subgrade reaction method and the finite element method (FEM), as well as a new chapter on excavations in soft soils, have been added.
Download or read book Analytical Methods in Petroleum Upstream Applications written by Cesar Ovalles and published by CRC Press. This book was released on 2015-04-02 with total page 1351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective measurement of the composition and properties of petroleum is essential for its exploration, production, and refining; however, new technologies and methodologies are not adequately documented in much of the current literature. Analytical Methods in Petroleum Upstream Applications explores advances in the analytical methods and instrumentation that allow more accurate determination of the components, classes of compounds, properties, and features of petroleum and its fractions. Recognized experts explore a host of topics, including: A petroleum molecular composition continuity model as a context for other analytical measurements A modern modular sampling system for use in the lab or the process area to collect and control samples for subsequent analysis The importance of oil-in-water measurements and monitoring The chemical and physical properties of heavy oils, their fractions, and products from their upgrading Analytical measurements using gas chromatography and nuclear magnetic resonance (NMR) applications Asphaltene and heavy ends analysis Chemometrics and modeling approaches for understanding petroleum composition and properties to improve upstream, midstream, and downstream operations Due to the renaissance of gas and oil production in North America, interest has grown in analytical methods for a wide range of applications. The understanding provided in this text is designed to help chemists, geologists, and chemical and petroleum engineers make more accurate estimates of the crude value to specific refinery configurations, providing insight into optimum development and extraction schemes.
Download or read book HDPE Geomembranes in Geotechnics written by Werner W. Müller and published by Springer Science & Business Media. This book was released on 2006-11-24 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-density Polyethylene (HDPE) geomembranes are widely used for liners and sealings in geotechnical engineering. Common applications include lining of ponds, dams and dykes, landfill underliners and cover systems, remediation of contaminated sites, waterproofing for tunnels, and beneath highways. This handbook covers all aspects of the field: basic materials, geomembrane manufacture, textured geomembranes, long-term performance and testing, installation and welding of geomembranes, quality assurance and control, leak detection, standards, recommendations and regulations.
Download or read book Geotechnical Engineering Handbook Procedures written by Ulrich Smoltczyk and published by John Wiley & Sons. This book was released on 2003-03-14 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of the Handbook covers the geotechnical procedures used in manufacturing anchors and piles as well as for improving or underpinning foundations, securing existing constructions, controlling ground water, excavating rocks and earth works. It also treats such specialist areas as the use of geotextiles and seeding.
Download or read book Engineering Geology written by Dieter D. Genske and published by Springer Nature. This book was released on with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Engineering for Transportation Infrastructure written by F. B. J. Barends and published by CRC Press. This book was released on 1999 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comptes rendus du quatorzi me conf rence internationale de M canique des sols et des travaux de fondation Hambourg 6 12 septembre 1997 written by and published by CRC Press. This book was released on 1997 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt:
