Download or read book Geometry of Single point Turning Tools and Drills written by Viktor P. Astakhov and published by Springer Science & Business Media. This book was released on 2010-07-29 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometry of Single-Point Turning Tools and Drills outlines clear objectives of cutting tool geometry selection and optimization, using multiple examples to provide a thorough explanation. It addresses several urgent problems that many present-day tool manufacturers, tool application specialists, and tool users, are facing. It is both a practical guide, offering useful, practical suggestions for the solution of common problems, and a useful reference on the most important aspects of cutting tool design, application, and troubleshooting practices. Covering emerging trends in cutting tool design, cutting tool geometry, machining regimes, and optimization of machining operations, Geometry of Single-Point Turning Tools and Drills is an indispensable source of information for tool designers, manufacturing engineers, research workers, and students.
Download or read book Drills written by Viktor P. Astakhov and published by CRC Press. This book was released on 2014-04-08 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a presentation that balances theory and practice, Drills: Science and Technology of Advanced Operations details the basic concepts, terminology, and essentials of drilling. The book addresses important issues in drilling operations, and provides help with the design of such operations. It debunks many old notions and beliefs while introducing scientifically and technically sound concepts with detailed explanations. The book presents a nine-step drilling tool failure analysis methodology that includes part autopsy and tool reconstruction procedure. A special feature of the book is the presentation of special mechanisms of carbide (e.g. cobalt leaching) and polycrystalline (PCD) tool wear and failure presented and correlated with the tool design, manufacturing, and implementation practice. The author also introduces the system approach to the design of the drilling system formulating the coherency law. Using this law as the guideline, he shows how to formulate the requirement to the components of such a system, pointing out that the drilling tool is the key component to be improved. Teaching how to achieve this improvement, the book provides the comprehensive scientific and engineering foundations for drilling tool design, manufacturing, and applications of high-performance tools. It includes detailed explanations of the design features, tool manufacturing and implementation practices, metrology of drilling and drilling tools, and the tool failure analysis. It gives you the information needed for proper manufacturing and selection of a tool material for any given application.
Download or read book Drilling Technology written by J. Paulo Davim and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-10-22 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide recent information on advances in drilling technology. The use of advanced machines, appropriate strategies and special drilling tools can signifi cantly reduce the machining time required for drilling operations, and consequently the production costs, and improve the quality of the holes produced. For these reasons an improvement of the drilling technology is very important for the modern manufacturing industries. This book can be used as a research book for fi nal undergraduate engineering course or at postgraduate level. It can also serve as a useful reference for academics, researchers, mechanical, industrial, production, manufacturing and materials engineers, professionals in drilling technology and related matters.
Download or read book High Productivity Drilling Tools written by Viktor P. Astakhov and published by CRC Press. This book was released on 2024-05-03 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely updated volume covers the design, manufacturing, and inspection of high‐productivity drilling tools (HPDT) and addresses common issues with drilling system components. It discards old notions and beliefs as it introduces scientifically and technically sound concepts and rules with detailed explanations and multiple practical examples. High‐Productivity Drilling Tools: Design and Geometry introduces the development of the concept of high‐productivity (HP) drill design and its manufacturing and application features. This book continues to develop the concept of a drilling system in the new edition and includes new practical examples. It explains how to properly design and manufacture drilling tools for a specific application and includes a detailed explanation of the design features, tool manufacturing and implementation practices, metrology of drilling and drilling tools, and the tool failure analysis. Using the coherency law as the guidelines introduced in the first edition, the new edition shows how to formulate the requirements for the components of the drilling system, pointing out that the drilling tool is the key component to be improved. This practical book should be on the shelves of all industrial engineers, those working in production and manufacturing, process designers, tool material designers, cutting tool designers, and quality specialists. Researchers, senior undergraduate students, and graduate students will also find this book full of very helpful reference information. This book is also available as a set - Drills: High-Productivity Drilling Tools, 2-Volume Set (9781032203508).
Download or read book Metalworking Fluids MWFs for Cutting and Grinding written by V P Astakhov and published by Elsevier. This book was released on 2012-01-31 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal working fluids (MWFs) provide important functions such as lubrication and cooling in the machining of metals. This book reviews the issues surrounding the use of fluids for cutting and grinding throughout the metal working process, from selection and testing to disposal.The book opens with chapters considering the mechanism and action, selection and delivery of MWFs to the machining zone before moving onto discuss the many issues surrounding MWFs during machining such as selection of the proper MWF, environmental concerns, supply methods, circulation and monitoring. The final chapters discuss the maintenance, replacement and disposal of MWFs.With its distinguished editors and international team of expert contributors, Metalworking fluids (MWFs) for cutting and grinding is an invaluable reference tool for engineers and organizations using metal cutting/machining in the manufacturing process as well as machine designers/manufacturers and machining fluid/chemical suppliers. - Chapters consider the mechanism and action, selection and delivery of MWFs to the machining zone - Environmental concerns, supply methods, circulation and monitoring are also discussed - Written by distinguished editors and international team of expert contributors
Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-14 with total page 1449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Nanofinishing Science and Technology written by Vijay Kumar Jain and published by CRC Press. This book was released on 2016-12-12 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finishing is the final operation after a part is sized and shaped. Currently in high tech industries, there is a demand for nano level surface finishing of components. This process is done to improve the surface finish, to remove the recast layer, or to remove surface and sub-surface defects. The result is low friction, longer product life, and low power requirements. Equally important is the aesthetic aspect of the product. This subject is growing very fast from the technology as well as a science point of view. Books on this subject are very limited, particularly those ones that deal with both the science as well as the technology aspects.
Download or read book Cutting Tool Applications written by George Schneider (Jr.) and published by . This book was released on 2002 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulations for Design and Manufacturing written by Uday S. Dixit and published by Springer. This book was released on 2018-04-19 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on numerical simulations of manufacturing processes, discussing the use of numerical simulation techniques for design and analysis of the components and the manufacturing systems. Experimental studies on manufacturing processes are costly, time consuming and limited to the facilities available. Numerical simulations can help study the process at a faster rate and for a wide range of process conditions. They also provide good prediction accuracy and deeper insights into the process. The simulation models do not require any pre-simulation, experimental or analytical results, making them highly suitable and widely used for the reliable prediction of process outcomes. The book is based on selected proceedings of AIMTDR 2016. The chapters discuss topics relating to various simulation techniques, such as computational fluid dynamics, heat flow, thermo-mechanical analysis, molecular dynamics, multibody dynamic analysis, and operational modal analysis. These simulation techniques are used to: 1) design the components, 2) to investigate the effect of critical process parameters on the process outcome, 3) to explore the physics of the process, 4) to analyse the feasibility of the process or design, and 5) to optimize the process. A wide range of advanced manufacturing processes are covered, including friction stir welding, electro-discharge machining, electro-chemical machining, magnetic pulse welding, milling with MQL (minimum quantity lubrication), electromagnetic cladding, abrasive flow machining, incremental sheet forming, ultrasonic assisted turning, TIG welding, and laser sintering. This book will be useful to researchers and professional engineers alike.
Download or read book Advanced Machining and Finishing written by Kapil Gupta and published by Elsevier. This book was released on 2021-04-17 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining and Finishing explains the background theory, working principles, technical specifications, and latest developments in a wide range of advanced machining and finishing techniques. The book includes valuable technical information, tables of data, and diagrams to assist machinists. Drawing on the work of experts in both academia and industry, coverage addresses theoretical developments as well as practical improvements from R&D. With over 25 important processes, from electro-chemical machining to nano-machining and magnetic field assisted finishing, this is the most complete guide to this subject available. This unique guide will allow readers to compare the characteristics of different processes, understand how they work, and provide parameters for their effective implementation. This is part of a 4 volume set entitled Handbooks in Advanced Manufacturing, with the other 3 addressing Advanced Welding and Deforming, Additive Manufacturing and Surface Treatment, and Sustainable Manufacturing Processes. - Provides the theory, operational parameters, and latest developments in over 25 different machining and finishing processes - Addresses both traditional and non-traditional machining methods - Introduces basic concepts in an introductory chapter, helping readers from a range of backgrounds to engage with the subject matter
Download or read book Machining and Machinability of Fiber Reinforced Polymer Composites written by Mohamed Thariq Hameed Sultan and published by Springer Nature. This book was released on 2020-12-22 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers current advances and practices in machining fibre-reinforced polymer composites under various conventional and nonconventional processes. It presents recent research and practices for effective and efficient machining of difficult-to-cut material, providing the technological ‘know-how’ on delamination-free of drilling, milling, trimming, and other cutting processes on fibre-reinforced polymer composites. It also guides the reader on the selection of optimum machining parameters, tool materials, as well as tool geometry. This book is of interest to academicians, students, researchers, practitioners, and industrialists working in aerospace, automotive, marine, and construction industries.
Download or read book Machining of Hard Materials written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-02-24 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard machining is a relatively recent technology that can be defined as a machining operation, using tools with geometrically defined cutting edges, of a work piece that has hardness values typically in the 45-70HRc range. This operation always presents the challenge of selecting a cutting tool insert that facilitates high-precision machining of the component, but it presents several advantages when compared with the traditional methodology based in finish grinding operations after heat treatment of work pieces. Machining of Hard Materials aims to provide the reader with the fundamentals and recent advances in the field of hard machining of materials. All the chapters are written by international experts in this important field of research. They cover topics such as: • advanced cutting tools for the machining of hard materials; • the mechanics of cutting and chip formation; • surface integrity; • modelling and simulation; and • computational methods and optimization. Machining of Hard Materials can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals in machining and related industries. It can also be used as a text for advanced undergraduate or postgraduate students studying mechanical engineering, manufacturing, or materials.
Download or read book Machining of Hard Materials written by Manjunath Patel G. C. and published by Springer Nature. This book was released on 2020-02-14 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the potential applications of hard materials as well as the latest trends and challenges in machining hard materials. Models for online monitoring to adjust parameters to obtain desired machining characteristics (i.e. reverse modelling) are discussed in this book. The conflicting requirements (i.e. maximize: material removal rate, roundness and minimize: surface roughness, dimensional ovality, co axiality, tool wear) in machining for industry personal is solved using advanced optimization tools. In addition, the framework for experimental modelling, predictive physic-based forward and reverse process models and optimization for better machining characteristics applicable to industry are proposed.
Download or read book Additive and Subtractive Manufacturing written by J. Paulo Davim and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-01-20 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) and subtractive manufacturing (SM) offer numerous advantages in the production of single and multiple components. They provide incomparable design independence and are used to fabricate products in several industries, e.g.: aeronautic, automotive, biomedical, etc. The book presents recent results of processes including 3D printing, SLS (selective laser sintering), EBM (electron beam melting) and Precise Cutting and Drilling.
Download or read book Modern Machining Technology written by J. Paulo Davim and published by Elsevier. This book was released on 2011-10-18 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This forward-thinking, practical book provides essential information on modern machining technology for industry with emphasis on the processes used regularly across several major industries. Machining technology presents great interest for many important industries including automotive, aeronautics, aerospace, renewable energy, moulds and dies, biomedical, and many others. Machining processes are manufacturing processes in which parts are shaped by the removal of unwanted material; these processes cover several stages and are usually divided into the following categories: cutting (involving single point or multipoint cutting tools); abrasive processes (including grinding and advanced machining processes, such as EDM (electrical discharge machining), LBM (laser-beam machining), AWJM (abrasive water jet machining) and USM (ultrasonic machining). - Provides essential information on modern machining technology, with emphasis on the processes used regularly across several major industries - Covers several processes and outlines their many stages - Contributions come from a series of international, highly knowledgeable and well-respected experts
Download or read book Tribology in Manufacturing Technology written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to show how tribological concepts can be applied in order to improve manufacturing technology in modern industry. It can be used as a guide book for engineering students or a reference useful for academics in the fields of tribology, manufacturing, materials and mechanical engineering.
Download or read book Industrial Measurements in Machining written by Grzegorz M. Królczyk and published by Springer Nature. This book was released on 2020-07-18 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the best papers from two conferences on machining and abrasive machining, organized in Poland on September 11-12, 2019. The chapters discuss classical topics and emerging methods and models in machining, measurement, and quality control. They cover new technologies, such as water jet machining, discuss important topics such as energy efficiency in machining, and analyze different cutting methods, materials and mechanisms.
