Download or read book Geometric Design Tolerancing Theories Standards and Applications written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of proper geometric dimensioning and tolerancing as a means of expressing the designer's functional intent and controlling the inevitable geometric and dimensional variations of mechanical parts and assemblies, is becoming well recognized. The research efforts and innovations in the field of tolerancing design, the development of supporting tools, techniques and algorithms, and the significant advances in computing software and hardware all have contributed to its recognition as a viable area of serious scholarly contributions. The field of tolerancing design is successfully making the transition to maturity where deeper insights and sound theories are being developed to offer explanations, and reliable implementations are introduced to provide solutions. Machine designers realized very early that manufacturing processes do not produce the nominal dimensions of designed parts. The notion of associating a lower and an upper limit, referred to as tolerances, with each dimen sion was introduced. Tolerances were specified to ensure the proper function of mating features. Fits of mating features included clearances, location fits, and interference fits, with various sub-grades in each category assigned a tolerance value depending on the nominal size of the mating features. During the inspection process, a part is rejected if a dimension fell outside the specified range. As the accuracy requirements in assemblies became tighter, designers had to consider other critical dimensions and allocate tolerances to them in order to ensure the assembly's functionality.
Download or read book Models for Computer Aided Tolerancing in Design and Manufacturing written by Joseph K. Davidson and published by Springer Science & Business Media. This book was released on 2007-05-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents of this book originate from a collection of selected papers presented at the 9th CIRP International Seminar on CAT held in April, 2005 at Arizona State University, USA. The CIRP plans this seminar every two years, and the book is one in a series of Proceedings on CAT. It contains 33 papers by experts from around the world on subjects that range from theoretical models to practical applications.
Download or read book Geometric Design Tolerancing written by Hoda A Elmaraghy and published by . This book was released on 1998-02-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Global Consistency of Tolerances written by Fred van Houten and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected contributions from the 6th CIRP International Seminar on Computer-Aided Tolerancing, which was held on 22-24 March, 1999, at the University of Twente, Enschede, The Netherlands. This volume presents the theory and application of consistent tolerancing. Until recently CADCAM systems did not even address the issue of tolerances and focused purely on nominal geometry. Therefore, CAD data was only of limited use for the downstream processes. The latest generation of CADCAM systems incorporates functionality for tolerance specification. However, the lack of consistency in existing tolerancing standards and everyday tolerancing practice still lead to ill-defined products, excessive manufacturing costs and unexpected failures. Research and improvement of education in tolerancing are hot items today. Global Consistency of Tolerances gives an excellent overview of the recent developments in the field of Computer-Aided Tolerancing, including such topics as tolerance specification; tolerance analysis; tolerance synthesis; tolerance representation; geometric product specification; functional product analysis; statistical tolerancing; education of tolerancing; computational metrology; tolerancing standards; and industrial applications and CAT systems. This book is well suited to users of new generation CADCAM systems who want to use the available tolerancing possibilities properly. It can also be used as a starting point for research activities.
Download or read book Geometric Tolerances written by Bianca M. Colosimo and published by Springer Science & Business Media. This book was released on 2010-11-01 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometric tolerances are changing the way we design and manufacture industrial products. Geometric Tolerances covers their impact on the world of design and production, highlighting new perspectives, possibilities, current issues and future challenges. The topics covered are designed to be relevant to readers from a variety of backgrounds, ranging from product designers and manufacturers to quality inspection engineers and quality engineers involved in statistical process monitoring. Areas included are: • selection of appropriate geometric tolerances and how they stack up in assembled products; • inspection of parts subjected to geometric tolerancing from the macro to the micro and sub-micro scales; and • enhancement of efficiency and efficacy of quality monitoring. Geometric Tolerances provides the reader with the most recent scientific research in the field, as well as with a significant amount of real-life industrial case studies, delivering a multidisciplinary, synoptic view of one of the hottest and most strategic topics in industrial production.
Download or read book Design and Modeling of Mechanical Systems VI written by Mnaouar Chouchane and published by Springer Nature. This book was released on with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geometric Product Specification and Verification Integration of Functionality written by Pierre Bourdet and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses in particular on Geometrical Product Specification and Verification which is an integrated tolerancing view and metrology proposed for ISO/TC213. Common geometrical bases for a language allowing to describe both functional specification and inspection procedures are provided. An extended view of the uncertainty concept is also given. Geometric Product Specification and Verification: Functionality Integration is an excellent resource to anyone interested in computer aided tolerancing, as well as CAD/CAM/CAQ. It can also be used as a good starting point for advanced research activity and is a good reference for industrial issues. A global view of geometrical product specification, models for tolerance representation, tolerance analysis, tolerance synthesis, tolerance in manufacturing, tolerance management, tolerance inspection, tolerancing standards, industrial applications and CAT systems are also included.
Download or read book Advances in Composite Materials written by Brahim Attaf and published by BoD – Books on Demand. This book was released on 2011-03-16 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: By adopting the principles of sustainable design and cleaner production, this important book opens a new challenge in the world of composite materials and explores the achieved advancements of specialists in their respective areas of research and innovation. Contributions coming from both spaces of academia and industry were so diversified that the 28 chapters composing the book have been grouped into the following main parts: sustainable materials and ecodesign aspects, composite materials and curing processes, modelling and testing, strength of adhesive joints, characterization and thermal behaviour, all of which provides an invaluable overview of this fascinating subject area. Results achieved from theoretical, numerical and experimental investigations can help designers, manufacturers and suppliers involved with high-tech composite materials to boost competitiveness and innovation productivity.
Download or read book Geometric Tolerancing of Products written by François Villeneuve and published by John Wiley & Sons. This book was released on 2013-01-28 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title describes the various research results in the field of geometric tolerancing of products, an activity that highlights the difficult scientific locks. The collection is of great importance for further innovation in the development of industrial products.
Download or read book Manufacturing Modelling Management and Control 2004 written by George Chryssolouris and published by Elsevier. This book was released on 2006-02-03 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Mathematical And Computational Tools In Metrology Iv written by Patrizia Ciarlini and published by World Scientific. This book was released on 2000-01-22 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in metrology depend on improvements in scientific and technical knowledge and in instrumentation quality, as well as better use of advanced mathematical tools and development of new ones. In this volume, scientists from both the mathematical and the metrological fields exchange their experiences. Industrial sectors, such as instrumentation and software, are likely to benefit from this exchange, since metrology has a high impact on the overall quality of industrial products, and applied mathematics is becoming more and more important in industrial processes.This book is of interest to people in universities, research centers and industries who are involved in measurements and need advanced mathematical tools to solve their problems, and to those developing such mathematical tools.
Download or read book Statistics in Industry written by Ravindra Khattree and published by Gulf Professional Publishing. This book was released on 2003-07-18 with total page 1222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents an exposition of topics in industrial statistics. It serves as a reference for researchers in industrial statistics/industrial engineering and a source of information for practicing statisticians/industrial engineers. A variety of topics in the areas of industrial process monitoring, industrial experimentation, industrial modelling and data analysis are covered and are authored by leading researchers or practitioners in the particular specialized topic. Targeting the audiences of researchers in academia as well as practitioners and consultants in industry, the book provides comprehensive accounts of the relevant topics. In addition, whenever applicable ample data analytic illustrations are provided with the help of real world data.
Download or read book Product Life Cycle Management written by Max Giordano and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive view of the most recent major international research in the field of tolerancing, and is an excellent resource for anyone interested in Computer Aided Tolerating. It is organized into 4 parts. Part 1 focuses on the more general problems of tolerance analysis and synthesis, for tolerancing in mechanical design and manufacturing processes. Part 2 specifically highlights the simulation of assembly with defects, and the influence of tolerances on the quality of the assembly. Part 3 deals with measurement aspects, and quality control throughout the life cycle. Different measurement technologies and methods for estimating uncertainty are considered. In Part 4, different aspects of tolerancing and their interactions are explored, from the definition of functional requirement to measurement processes in a PLM approach.
Download or read book Integrated Design and Manufacturing in Mechanical Engineering written by Patrick Chedmail and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Third IDMME Conference held in Montreal, Canada, May 2000
Download or read book Advanced Mathematical and Computational Tools in Metrology and Testing VIII written by Franco Pavese and published by World Scientific. This book was released on 2009 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields. This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.
Download or read book Design and Modeling of Mechanical Systems IV written by Nizar Aifaoui and published by Springer Nature. This book was released on 2020-02-26 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 8th International Congress on Design and Modeling of Mechanical Systems (CMSM’2019), held in Hammamet, Tunisia, from the 18th to the 20th of March 2019. It reports on research, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, these proceedings offers a broad overview of the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2019 was jointly organized by two leading Tunisian research laboratories: the Mechanical Engineering Laboratory of the National Engineering School of Monastir, University of Monastir and the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax, University of Sfax.
Download or read book Research in Tolerancing written by Sandro Wartzack and published by Springer Nature. This book was released on with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
