Download or read book Stratigraphic Drilling in the Surat and Bowen Basins 1967 70 written by A. R. G. Gray and published by . This book was released on 1972 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sequence Stratigraphic Interpretation of Seismic Data in the Taroom Region Bowen and Surat Basins Queensland written by and published by . This book was released on 1992 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress Report on the Sequence Stratigraphic Interpretation of Seismic Data from the Roma Transect Bowen Surat Basins Queensland written by O. Dixon and published by . This book was released on 1993 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sequence Stratigraphic Interpretation of Seismic Data North of 26 s Bowen and Surat Basins Queensland written by and published by . This book was released on 1994 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3D Digital Geological Models written by Andrea Bistacchi and published by John Wiley & Sons. This book was released on 2022-03-29 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D DIGITAL GEOLOGICAL MODELS Discover the practical aspects of modeling techniques and their applicability on both terrestrial and extraterrestrial structures A wide overlap exists in the methodologies used by geoscientists working on the Earth and those focused on other planetary bodies in the Solar System. Over the course of a series of sessions at the General Assemblies of the European Geosciences Union in Vienna, the intersection found in 3D characterization and modeling of geological and geomorphological structures for all terrestrial bodies in our solar system revealed that there are similar datasets and common techniques for the study of all planets—Earth and beyond—from a geological point-of-view. By looking at Digital Outcrop Models (DOMs), Digital Elevation Models (DEMs), or Shape Models (SM), researchers may achieve digital representations of outcrops, topographic surfaces, or entire small bodies of the Solar System, like asteroids or comet nuclei. 3D Digital Geological Models: From Terrestrial Outcrops to Planetary Surfaces has two central objectives, to highlight the similarities that geological disciplines have in common when applied to entities in the Solar System, and to encourage interdisciplinary communication and collaboration between different scientific communities. The book particularly focuses on analytical techniques on DOMs, DEMs and SMs that allow for quantitative characterization of outcrops and geomorphological features. It also highlights innovative 3D interpretation and modeling strategies that allow scientists to gain new and more advanced quantitative results on terrestrial and extraterrestrial structures. 3D Digital Geological Models: From Terrestrial Outcrops to Planetary Surfaces readers will also find: The first volume dedicated to this subject matter that successfully integrates methodology and applications A series of methodological chapters that provide instruction on best practices involving DOMs, DEMs, and SMs A wide range of case studies, including small- to large-scale projects on Earth, Mars, the 67P/Churyumov-Gerasimenko comet, and the Moon Examples of how data collected at surface can help reconstruct 3D subsurface models 3D Digital Geological Models: From Terrestrial Outcrops to Planetary Surfaces is a useful reference for academic researchers in earth science, structural geology, geophysics, petroleum geology, remote sensing, geostatistics, and planetary scientists, and graduate students studying in these fields. It will also be of interest for professionals from industry, particularly those in the mining and hydrocarbon fields.
Download or read book Sequence Stratigraphic Interpretation of Seismic Data North of 26 Degrees S Bowen and Surat Basins Queensland written by Allan T. Wells and published by . This book was released on 1994 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Description of a Series of Elementary Geological Models written by Thomas Sopwith and published by . This book was released on 1875 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stratigraphic Drilling in the Surat and Bowen Basins 1965 66 written by A.R.G. Gray and published by . This book was released on 1968 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stratigraphic Modeling and Interpretation written by Norman S. Neidell and published by American Association of Petroleum Geologists. This book was released on 1979 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sequence Stratigraphy in Offshore South African Divergent Basins written by Leonard Franklin Brown and published by AAPG. This book was released on 1995 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the result of an offshore exploration and drilling programme by Soekor (Pty) Ltd in the Republic of South Africa beginning in 1987. Seismic stratigraphic data and borehole information were incorporated and released in what was one of the first detailed and comprehensive published examples of the new field of sequence stratigraphy. The project was conducted over a South African offshore area of 175,000 square kilometres, in the Pletmos, Bredasdorp, and Orange basins, which are examples of divergent basins associated with the breakup of Gondwana.
Download or read book An Introduction to Statistical Models in Geology written by William Christian Krumbein and published by . This book was released on 1965 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stratigraphic Geology written by Hervey Woodburn Shimer and published by . This book was released on 1909 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stratigraphic Drilling Report GSQ McKinlay 1 written by K. L. Hoffmann and published by . This book was released on 1991 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Triassic Jurassic Stratigraphy of the Culpeper and Barboursville Basins Virginia and Maryland written by K. Y. Lee and published by . This book was released on 1989 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clarification of the Triassic-Jurassic stratigraphic sequences, sedimentation, and depositional environments.
Download or read book Geologic Framework Model Analysis Model Report written by and published by . This book was released on 2000 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this report is to document the Geologic Framework Model (GFM), Version 3.1 (GFM3.1) with regard to data input, modeling methods, assumptions, uncertainties, limitations, and validation of the model results, qualification status of the model, and the differences between Version 3.1 and previous versions. The GFM represents a three-dimensional interpretation of the stratigraphy and structural features of the location of the potential Yucca Mountain radioactive waste repository. The GFM encompasses an area of 65 square miles (170 square kilometers) and a volume of 185 cubic miles (771 cubic kilometers). The boundaries of the GFM were chosen to encompass the most widely distributed set of exploratory boreholes (the Water Table or WT series) and to provide a geologic framework over the area of interest for hydrologic flow and radionuclide transport modeling through the unsaturated zone (UZ). The depth of the model is constrained by the inferred depth of the Tertiary-Paleozoic unconformity. The GFM was constructed from geologic map and borehole data. Additional information from measured stratigraphy sections, gravity profiles, and seismic profiles was also considered. This interim change notice (ICN) was prepared in accordance with the Technical Work Plan for the Integrated Site Model Process Model Report Revision 01 (CRWMS M & O 2000). The constraints, caveats, and limitations associated with this model are discussed in the appropriate text sections that follow. The GFM is one component of the Integrated Site Model (ISM) (Figure l), which has been developed to provide a consistent volumetric portrayal of the rock layers, rock properties, and mineralogy of the Yucca Mountain site. The ISM consists of three components: (1) Geologic Framework Model (GFM); (2) Rock Properties Model (RPM); and (3) Mineralogic Model (MM). The ISM merges the detailed project stratigraphy into model stratigraphic units that are most useful for the primary downstream models and the repository design. These downstream models include the hydrologic flow models and the radionuclide transport models. All the models and the repository design, in turn, will be incorporated into the Total System Performance Assessment (TSPA) of the potential radioactive waste repository block and vicinity to determine the suitability of Yucca Mountain as a host for the repository. The interrelationship of the three components of the ISM and their interface with downstream uses are illustrated in Figure 2.
Download or read book Stratigraphic Modeling and Interpretation written by Norman S. Neidell and published by . This book was released on 1979 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Stratigraphic interpretation of seismic data requires that the seismic information be expressed in geological terms. The strictly geological view of the earth is developed from surface observations, guiding principles of geological evolution and subsurface information from bore holes. Seismic measurements on the other hand, define in some sense the subsurface geometry and give estimates of the acoustic impedance which is related to the rock velocities and densities.
Download or read book Numerical Experiments in Stratigraphy written by John Warvelle Harbaugh and published by . This book was released on 1999 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume summarizes the status of computer modelling of sedimentary and stratigraphic processes and demonstrates the potential of these studies. The papers in the volume collectively illustrate the utility of stratigraphic modelling for incorporating an synthesizing geologic, geophysical and petrophysical data for increasing understanding of sedimentary and stratigraphic systems and the distribution of natural resources.
