Download or read book Generic Substation Event Monitoring Based on IEC 61850 and IEEE 1588 Standards written by Yang Liu and published by . This book was released on 2015 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Electricity has become not only an essential element to people's everyday life but also the most important power source to most industries and businesses. The continuously increasing demand of electricity consumption has resulted in a consistent expansion of power grid as it was seen in the past few decades. This in turn has dramatically increased the cost of electricity during the same period in Australia. In contrast, the recently recorded low economic activities and significant growth of rooftop photovoltaic has led to a reduction in the forecasted electricity demand in Australia. This has resulted a reduced number of network augmentation projects for most electric utilities across the country. Instead, the substation refurbishment work has become the focus for most electric utilities in the foreseeable future. Such sharp turning point of trend has placed an enormous challenge in front of electric utilities on how to make the power system operation more cost effective and preserve a high level of reliability and security. In response to the challenge, the integration of advanced technologies with the existing power system has been recognised as a viable solution. The international standard IEC 61850 for substation communication system has gained momentum globally to be implemented in power utility automation systems. The flexibility and vendor independent feature of the standard inspired a range of innovative approaches for power grid projects including substation refurbishment work. This research aims to develop and verify a vendor independent device, which is named as substation event monitor, with the capability of interfacing the legacy and existing substation automation system equipment to the modern intelligent electronic devices (IEDs) over Ethernet network in a non-intrusive and cost effective manner. The substation event monitor is also equipped with the ability of providing synchronised time information at the accuracy level of ±1 microsecond over the same communication infrastructure via IEEE 1588 standard, also called the Precision Time Protocol (PTP). The created device is suitable for substation refurbishment work and has the potential in many other utility applications, such as network state estimation and substation commissioning. This thesis takes a bottom-up approach to the form of information on the construction and verification of substation event monitor. It begins with the provision of the critical review on the detailed knowledge of both international standards of IEC 61850 and IEEE 1588. This work was needed because there is lack of concise, publicly available and informative material on these complex standards for power utility engineers. The thesis is then expanded with the in-depth design information on the developed prototype of substation event monitor. Finally, the verification results of the prototype device were produced at both component level and system level in this thesis. The provision of the comprehensive knowledge of the prototype device will deliver confidence to utility engineers in considering the adoption of substation event monitor as a low cost, non-intrusive, IEC 61850 compatible and synchronised IED that meets the needs of substation refurbishment work and other potential power utility applications." -- abstract, pages ii-iii.

Download or read book IEC 61850 Based Smart Substations written by Yubo Yuan and published by Academic Press. This book was released on 2019-06-12 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: IEC 61850-Based Smart Substations: Principles, Testing, Operation and Maintenance systematically presents principles, testing approaches, and the operation and maintenance technologies of such substations from the perspective of real-world application. The book consists of chapters that cover a review of IEC 61850 based smart substations, substation configuration technology, principles and testing technologies for the smart substation, process bus, substation level, time setting and synchronization, and cybersecurity. It gives detailed information on testing processes and approaches, operation and maintenance technologies, and insights gained through practical experience. As IEC 61850 based smart substations have played a significant role in smart grids, realizing information sharing and device interoperation, this book provides a timely resource on the topics at hand. - Contributes to the overall understanding of standard IEC 61850, analyzing principles and features - Introduces best practices derived from hundreds of smart substation engineering applications - Summarizes current research and insights gained from practical experience in the testing, operation and maintenance of smart substation projects in China - Gives systematic and detailed information on testing technology - Introduces novel technologies for next-generation substations

Download or read book Cyberphysical Smart Cities Infrastructures written by M. Hadi Amini and published by John Wiley & Sons. This book was released on 2022-01-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn to deploy novel algorithms to improve and secure smart city infrastructure In Cyberphysical Smart Cities Infrastructures: Optimal Operation and Intelligent Decision Making, accomplished researchers Drs. M. Hadi Amini and Miadreza Shafie-Khah deliver a crucial exploration of new directions in the science and engineering of deploying novel and efficient computing algorithms to enhance the efficient operation of the networks and communication systems underlying smart city infrastructure. The book covers special issues on the deployment of these algorithms with an eye to helping readers improve the operation of smart cities. The editors present concise and accessible material from a collection of internationally renowned authors in areas as diverse as computer science, electrical engineering, operation research, civil engineering, and the social sciences. They also include discussions of the use of artificial intelligence to secure the operations of cyberphysical smart city infrastructure and provide several examples of the applications of novel theoretical algorithms. Readers will also enjoy: Thorough introductions to fundamental algorithms for computing and learning, large-scale optimizations, control theory for large-scale systems Explorations of machine learning and intelligent decision making in cyberphysical smart cities, including smart energy systems and intelligent transportation networks In-depth treatments of intelligent decision making in cyberphysical smart city infrastructure and optimization in networked smart cities Perfect for senior undergraduate and graduate students of electrical and computer engineering, computer science, civil engineering, telecommunications, information technology, and business, Cyberphysical Smart Cities Infrastructures is an indispensable reference for anyone seeking to solve real-world problems in smart cities.

Download or read book Magnetic Field Measurement with Applications to Modern Power Grids written by Qi Huang and published by John Wiley & Sons. This book was released on 2019-10-07 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the development, challenges and utilisation of magnetic field measurement Magnetic Field Measurement with Applications to Modern Power Grids offers an authoritative review of the development of magnetic field measurement and the application of the technology to the smart grid. The authors, noted experts in the field, present the challenges to the field of magnetics and explore the use of cutting-edge magnetic technology in the development of the smart grid. In addition, the authors discussed the applications of magnetic field measurements in substations, generations systems, transmission systems and distribution systems. The specialized applications of magnetic field measurements in these venues are explored including the typical sensors used, the field strength levels and spectral frequencies involved and the mathematics that are needed to process data measurements. The book presents the complex topic of electromagnetics in clear and understandable terms. Magnetic Field Measurement with Applications to Modern Power Grids offers researchers in the magnetic community a guide to the progress of the smart grid and helps to inspire innovation of magnetic technologies in the smart grid. The technologies of measurement are a bridge between mathematical models and application oriented practice. The book is a guide to that bridge and: Offers a comprehensive review of the development of magnetic field measurement Shows how magnetic field measurement applies to the smart grid Outlines the challenges, trends and needs for future magnetic measurement systems Includes information on the need for levels of standardisation, smart grid applications and innovative sensors Written for researchers in smart grid, power engineers, power grid companies and professionals in the measurement and test industries, Magnetic Field Measurement with Applications to Modern Power Grids is an authoritative guide that offers a clear understanding of the relationship between the magnetic field measurement and power grids.

Download or read book Management and Security in the Age of Hyperconnectivity written by Rémi Badonnel and published by Springer. This book was released on 2016-06-06 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th IFIP WG 6.6International Conference on Autonomous Infrastructure, Management, and Security, AIMS 2016, held in Munich, Germany, in June 2016. The 7 full papers presented together with 3 short papers were carefully reviewed and selected from 22 submissions. The volume also includes 9 papers presented at the AIMS PhD workshop. They were reviewed in a separate process and selected from 21 submissions. The full papers are organized in topical sections on autonomic and smart management and security attacks and defenses. The workshop papers are organized in topical sections on management of future networks and security management. The short papers deal with methods for management and security.

Download or read book IEC 61850 Demystified written by Herbert Falk and published by Artech House. This book was released on 2018-12-31 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive overview of 61850 standard/protocol focuses on implementation, taking the reader through the development and concepts of IEC 61850. This includes the initial work by General Motors (Manufacturing Automation Protocol), EPRI (UCA 1.0 and UCA 2.0), IEEE (TR 1550), and IEC 61850. The standard is a significant piece of many IIoT (industrial internet of things) strategies for substation communication. The book discusses and documents the basic research and theory of guaranteed multicast done for IEC 61850 GOOSE as well as the shift from variable technology to object oriented technology. The layering principles, as well as the structure, of IEC 61850 are discussed in detail as well as the actual communication profiles that have been created to support substation/distribution automation, distributed energy resources, and synchrophasors. Real applications will be discussed as well as the future direction of the standard. The author is a technical co-editor of IEC 61850 standard and a leader in US implementations, having been involved with the technology from its inception.

Download or read book Springer Handbook of Power Systems written by Konstantin O. Papailiou and published by Springer Nature. This book was released on 2021-04-12 with total page 1283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook offers a comprehensive source for electrical power professionals. It covers all elementary topics related to the design, development, operation and management of power systems, and provides an insight from worldwide key players in the electrical power systems industry. Edited by a renowned leader and expert in Power Systems, the book highlights international professionals’ longstanding experiences and addresses the requirements of practitioners but also of newcomers in this field in finding a solution for their problems. The structure of the book follows the physical structure of the power system from the fundamentals through components and equipment to the overall system. In addition the handbook covers certain horizontal matters, for example "Energy fundamentals", "High voltage engineering", and "High current and contact technology" and thus intends to become the major one-stop reference for all issues related to the electrical power system.

Download or read book IoT Fundamentals written by David Hanes and published by Cisco Press. This book was released on 2017-05-30 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, billions of devices are Internet-connected, IoT standards and protocols are stabilizing, and technical professionals must increasingly solve real problems with IoT technologies. Now, five leading Cisco IoT experts present the first comprehensive, practical reference for making IoT work. IoT Fundamentals brings together knowledge previously available only in white papers, standards documents, and other hard-to-find sources—or nowhere at all. The authors begin with a high-level overview of IoT and introduce key concepts needed to successfully design IoT solutions. Next, they walk through each key technology, protocol, and technical building block that combine into complete IoT solutions. Building on these essentials, they present several detailed use cases, including manufacturing, energy, utilities, smart+connected cities, transportation, mining, and public safety. Whatever your role or existing infrastructure, you’ll gain deep insight what IoT applications can do, and what it takes to deliver them. Fully covers the principles and components of next-generation wireless networks built with Cisco IOT solutions such as IEEE 802.11 (Wi-Fi), IEEE 802.15.4-2015 (Mesh), and LoRaWAN Brings together real-world tips, insights, and best practices for designing and implementing next-generation wireless networks Presents start-to-finish configuration examples for common deployment scenarios Reflects the extensive first-hand experience of Cisco experts

Download or read book Substation Automation written by Mladen Kezunovic and published by Springer Verlag. This book was released on 2010-07-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the book is to fill a knowledge gap by covering the topic of substation automation by a team of authors, with academic and industry backgrounds. Understanding substation automation concepts and practical solutions requires knowledge in vastly diverse areas, such as primary and secondary equipment, computers, communications, fiber optic sensors, signal processing, and general information technology not generally taught in a power curricula but taught as independent subjects. At the same time, utility practice dictates how substation automation designs may be laid out and deployed. To design such a system one also requires knowledge about existing standards for data exchange, as well as test methods for evaluation of solutions. This book is designed to meet the educational needs of undergraduate and graduate power majors, as well as to serve as a reference to professionals who need to know about substation automation because of fast changing technology expertise needed in their careers. To meet the wide range of interests and needs, the book covers diverse aspects of substation automation, allowing instructors to select the best combination of chapters to meet their specific educational needs.

Download or read book Applied Cyber Security and the Smart Grid written by Eric D. Knapp and published by Newnes. This book was released on 2013-02-26 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many people think of the Smart Grid as a power distribution group built on advanced smart metering—but that's just one aspect of a much larger and more complex system. The "Smart Grid" requires new technologies throughout energy generation, transmission and distribution, and even the homes and businesses being served by the grid. This also represents new information paths between these new systems and services, all of which represents risk, requiring a more thorough approach to where and how cyber security controls are implemented. This insight provides a detailed architecture of the entire Smart Grid, with recommended cyber security measures for everything from the supply chain to the consumer. - Discover the potential of the Smart Grid - Learn in depth about its systems - See its vulnerabilities and how best to protect it

Download or read book Substation Automation Handbook written by Klaus-Peter Brand and published by . This book was released on 2003 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Research Methods for Cyber Security written by Thomas W. Edgar and published by Syngress. This book was released on 2017-04-19 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research Methods for Cyber Security teaches scientific methods for generating impactful knowledge, validating theories, and adding critical rigor to the cyber security field. This book shows how to develop a research plan, beginning by starting research with a question, then offers an introduction to the broad range of useful research methods for cyber security research: observational, mathematical, experimental, and applied. Each research method chapter concludes with recommended outlines and suggested templates for submission to peer reviewed venues. This book concludes with information on cross-cutting issues within cyber security research. Cyber security research contends with numerous unique issues, such as an extremely fast environment evolution, adversarial behavior, and the merging of natural and social science phenomena. Research Methods for Cyber Security addresses these concerns and much more by teaching readers not only the process of science in the context of cyber security research, but providing assistance in execution of research as well. - Presents research methods from a cyber security science perspective - Catalyzes the rigorous research necessary to propel the cyber security field forward - Provides a guided method selection for the type of research being conducted, presented in the context of real-world usage

Download or read book Industrial Communication Systems written by Bogdan M. Wilamowski and published by CRC Press. This book was released on 2018-10-03 with total page 963 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Electronics Handbook, Second Edition, Industrial Communications Systems combines traditional and newer, more specialized knowledge that helps industrial electronics engineers develop practical solutions for the design and implementation of high-power applications. Embracing the broad technological scope of the field, this collection explores fundamental areas, including analog and digital circuits, electronics, electromagnetic machines, signal processing, and industrial control and communications systems. It also facilitates the use of intelligent systems—such as neural networks, fuzzy systems, and evolutionary methods—in terms of a hierarchical structure that makes factory control and supervision more efficient by addressing the needs of all production components. Enhancing its value, this fully updated collection presents research and global trends as published in the IEEE Transactions on Industrial Electronics Journal, one of the largest and most respected publications in the field. Modern communication systems in factories use many different—and increasingly sophisticated—systems to send and receive information. Industrial Communication Systems spans the full gamut of concepts that engineers require to maintain a well-designed, reliable communications system that can ensure successful operation of any production process. Delving into the subject, this volume covers: Technical principles Application-specific areas Technologies Internet programming Outlook, including trends and expected challenges Other volumes in the set: Fundamentals of Industrial Electronics Power Electronics and Motor Drives Control and Mechatronics Intelligent Systems

Download or read book Cybersecurity for Industry 4 0 written by Lane Thames and published by Springer. This book was released on 2017-04-03 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to cybersecurity and its impact on the realization of the Industry 4.0 vision. It covers the technological foundations of cybersecurity within the scope of the Industry 4.0 landscape and details the existing cybersecurity threats faced by Industry 4.0, as well as state-of-the-art solutions with regard to both academic research and practical implementations. Industry 4.0 and its associated technologies, such as the Industrial Internet of Things and cloud-based design and manufacturing systems are examined, along with their disruptive innovations. Further, the book analyzes how these phenomena capitalize on the economies of scale provided by the Internet. The book offers a valuable resource for practicing engineers and decision makers in industry, as well as researchers in the design and manufacturing communities and all those interested in Industry 4.0 and cybersecurity.

Download or read book Smart Grids Fundamentals and Technologies in Electricity Networks written by Bernd M. Buchholz and published by Springer. This book was released on 2014-07-08 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient transmission and distribution of electricity is a fundamental requirement for sustainable development and prosperity. The world is facing great challenges regarding the reliable grid integration of renewable energy sources in the 21st century. The electric power systems of the future require fundamental innovations and enhancements to meet these challenges. The European Union’s “Smart Grid” vision provides a first overview of the appropriate deep-paradigm changes in the transmission, distribution and supply of electricity. The book brings together common themes beginning with Smart Grids and the characteristics of new power plants based on renewable energy and /or highly efficient generation principles. It covers the advanced technologies applied today in the transmission and distribution networks and innovative solutions for maintaining today’s high power quality under the challenging conditions of large-scale shares of volatile renewable energy sources in the annual energy balance. Besides considering the new primary and secondary technology solutions and control facilities for the transmission and distribution networks, prospective market conditions allowing network operators and the network users to gain benefits are also discussed. The growing role of information and communication technologies is investigated. The importance of new standards is underlined and the current international efforts in developing a consistent set of standards are described in detail. The presentation of international experiences to apply novel Smart Grid solutions to the practice of network operation concludes this book. The authors of the book worked for many years to develop Smart Grid solutions within national and international projects and to introduce them in the practice of network operations.

Download or read book Power System SCADA and Smart Grids written by Mini S. Thomas and published by CRC Press. This book was released on 2017-12-19 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power System SCADA and Smart Grids brings together in one concise volume the fundamentals and possible application functions of power system supervisory control and data acquisition (SCADA). The text begins by providing an overview of SCADA systems, evolution, and use in power systems and the data acquisition process. It then describes the components of SCADA systems, from the legacy remote terminal units (RTUs) to the latest intelligent electronic devices (IEDs), data concentrators, and master stations, as well as: Examines the building and practical implementation of different SCADA systems Offers a comprehensive discussion of the data communication, protocols, and media usage Covers substation automation (SA), which forms the basis for transmission, distribution, and customer automation Addresses distribution automation and distribution management systems (DA/DMS) and energy management systems (EMS) for transmission control centers Discusses smart distribution, smart transmission, and smart grid solutions such as smart homes with home energy management systems (HEMs), plugged hybrid electric vehicles, and more Power System SCADA and Smart Grids is designed to assist electrical engineering students, researchers, and practitioners alike in acquiring a solid understanding of SCADA systems and application functions in generation, transmission, and distribution systems, which are evolving day by day, to help them adapt to new challenges effortlessly. The book reveals the inner secrets of SCADA systems, unveils the potential of the smart grid, and inspires more minds to get involved in the development process.

Download or read book Synchronized Phasor Measurements and Their Applications written by A.G. Phadke and published by Springer Science & Business Media. This book was released on 2008-08-15 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an account of the field of synchronized Phasor Measurement technology, its beginning, its technology and its principal applications. It covers wide Area Measurements (WAM) and their applications. The measurements are done using GPS systems and eventually will replace the existing technology. The authors created the field about twenty years ago and most of the installations planned or now in existence around the world are based on their work.