Download or read book Generation and Detection of Defects in Metallic Parts Fabricated by Selective Laser Melting and Electron Beam Melting and Their Effects on Mechanical Properties written by Haijun Gong and published by . This book was released on 2013 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application of Additive Manufacturing (AM) technology to fabricate complex three-dimensional components is one promising direction within the manufacturing industry. This approach is rapidly changing the way designers and engineers create objects with desired shape and structures. Selective Laser Melting (SLM) and Electron Beam Melting (EBM) are two common powder bed fusion processes within AM for fabricating metallic parts. In order to give designers and engineers more insights into employing AM, the quality and long-term behavior of SLM- and EBM-produced parts need to be carefully investigated. Thus, this research project aims to understand how processing parameters affect defect generation and distribution during SLM and EBM processes, to study the morphological features of defects, to identify effective non-destructive method(s) to detect these defects, and to characterize the effect of defects on mechanical properties of SLM- and EBM-produced parts. The study began by generating stochastic defects via adjustment to process parameters from optimal parameters to marginal parameters, in order to correlate the porosity to the marginal parameters. Archimedes method was employed to estimate porosity of SLM- and EBM-produced specimens. After this, by using destructive characterization techniques, the defective specimens were sectioned. The morphology of stochastic defects was investigated based on their contour features on the cross sections. Micro CT was primarily used to evaluate the stochastic defects in the SLM and EBM parts and demonstrate their morphological characteristics and porosity in the single slices and reconstructed models. Finally, tensile and fatigue tests were carried out on Ti-6Al-4V parts with identified porosity. The fracture mechanism was analyzed. This study established a fundamental understanding of defects in parts made by SLM and EBM processes. Porosity was quantitatively correlated to the marginal parameters of SLM and EBM processes. Defects were differentiated based on their morphological properties and features. Micro CT was confirmed to be an effective non-destructive method for evaluating stochastic defects in SLM- and EBM-produced parts. The effects of stochastic defects on Ti-6Al-4V parts were determined based on tensile and fatigue tests. It was found that both microstructure and porosity have an impact on the mechanical properties of SLM- and EBM-produced parts.
Download or read book Metallic Foam Bone written by Cuie Wen and published by Woodhead Publishing. This book was released on 2016-11-14 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic Foam Bone: Processing, Modification and Characterization and Properties examines the use of porous metals as novel bone replacement materials. With a strong focus on materials science and clinical applications, the book also examines the modification of metals to ensure their biocompatibility and efficacy in vivo. Initial chapters discuss processing and production methods of metals for tissue engineering and biomedical applications that are followed by topics on practical applications in orthopedics and dentistry. Finally, the book addresses the surface science of metallic foam and how it can be tailored for medical applications. This book is a valuable resource for materials scientists, biomedical engineers, and clinicians with an interest in innovative biomaterials for orthopedic and bone restoration. - Introduces biomaterials researchers to a promising, rapidly developing technology for replacing hard tissue - Increases familiarity with a range of technologies, enabling materials scientists and engineers to improve the material properties of porous metals - Explores the clinical applications of metal foams in orthopedics and dentistry
Download or read book Additive Manufacturing of High Performance Metallic Materials written by Robert Pederson and published by Elsevier. This book was released on 2023-09-19 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of High-Performance Metallic Materials outlines the state-of-the-art on AM in high performance materials utilizing the two most industrially interesting routes of powder bed fusion (PBF) and directed energy deposition (DED). The book delves into Feedstock, Processing, Monitoring and control, Modeling and simulation, and Surface and thermal post-treatments. It specifically addresses materials and the most relevant and high performance applications, namely Ni-based alloys and Titanium alloys, and also provides insights into potential applications through illustrative case studies. With each chapter contributed by experts in the field, this work will serve as a comprehensive resource for graduate students and practitioners alike. - Covers the entire value chain relevant to additive manufacturing spanning feedstock, processing, monitoring, post-treatment, testing and applications - Includes the fundamental understanding of varied associated aspects derived from both extensive experimental knowledge and theoretical investigations - Addresses key materials relevant to varied high performance applications, namely Superalloys and Ni-based alloys
Download or read book Additive Manufacturing written by T.S. Srivatsan and published by CRC Press. This book was released on 2015-09-25 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get Ready for the Future of Additive ManufacturingAdditive Manufacturing: Innovations, Advances, and Applications explores the emerging field of additive manufacturing (AM)-the use of 3D printing to make prototype parts on demand. Often referred to as the third industrial revolution, AM offers many advantages over traditional manufacturing. This pr
Download or read book Digitalization of design for support structures in laser powder bed fusion of metals written by Katharina Bartsch and published by Springer Nature. This book was released on 2023-02-18 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing is considered a key technology for digital production. However, several barriers towards the broad industrial application exist, e.g. the associated cost and the required experience regarding the manufacturing process. To eradicate these barriers, the complete digitalization of the value creation process is needed. In this thesis, a digital, automated support structuredesign procedure is developed. Topology optimization is used for design rule determination, and the space colonization algorithm is adapted for the automated design. The validity of the procedure is proven experimentally, revealing sufficient mechanical performance alongside cost reduction at medium to large production scales.
Download or read book Additive Manufacturing of Metals written by John O. Milewski and published by Springer. This book was released on 2017-06-28 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This engaging volume presents the exciting new technology of additive manufacturing (AM) of metal objects for a broad audience of academic and industry researchers, manufacturing professionals, undergraduate and graduate students, hobbyists, and artists. Innovative applications ranging from rocket nozzles to custom jewelry to medical implants illustrate a new world of freedom in design and fabrication, creating objects otherwise not possible by conventional means. The author describes the various methods and advanced metals used to create high value components, enabling readers to choose which process is best for them. Of particular interest is how harnessing the power of lasers, electron beams, and electric arcs, as directed by advanced computer models, robots, and 3D printing systems, can create otherwise unattainable objects. A timeline depicting the evolution of metalworking, accelerated by the computer and information age, ties AM metal technology to the rapid evolution of global technology trends. Charts, diagrams, and illustrations complement the text to describe the diverse set of technologies brought together in the AM processing of metal. Extensive listing of terms, definitions, and acronyms provides the reader with a quick reference guide to the language of AM metal processing. The book directs the reader to a wealth of internet sites providing further reading and resources, such as vendors and service providers, to jump start those interested in taking the first steps to establishing AM metal capability on whatever scale. The appendix provides hands-on example exercises for those ready to engage in experiential self-directed learning.
Download or read book Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting written by Chunze Yan and published by Academic Press. This book was released on 2021-06-12 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Triply Periodic Minimal Surface Lattices by Selective Laser Melting Additive Manufacturing presents the design, manufacturing, microstructure, mechanical properties and applications of TPMS structures fabricated by selective laser additive manufacturing technology. The title explains these complex and useful structures based on systematic work in the UK and China. Sections introduce structure design methods, assess TPMS structures, explain mathematical their modeling, present the manufacturing, microstructure, mechanical and fatigue properties of metal uniform TPMS structures, discuss manufacturing and mechanical responses for functionally graded TPMS structures, give numerical analysis methods for predicting the mechanics of uniform and functionally graded TPMS structures, and more. - Presents the state-of-the art in triply periodic minimal surface (TPMS) structures by surface laser melting (SLM) - Describes how to assess manufacturability of TPMS structures by additive manufacturing (AM) - Analyzes the mechanical properties of TPMS structures through experimental and numerical methods - Details topology optimization for pore size - Gives fatigue fracture mechanics for TPMS structures
Download or read book Precision Metal Additive Manufacturing written by Richard Leach and published by CRC Press. This book was released on 2020-09-21 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is a fast-growing sector with the ability to evoke a revolution in manufacturing due to its almost unlimited design freedom and its capability to produce personalised parts locally and with efficient material use. AM companies, however, still face technological challenges such as limited precision due to shrinkage, built-in stresses and limited process stability and robustness. Moreover, often post-processing is needed due to high roughness and remaining porosity. Qualified, trained personnel are also in short supply. In recent years, there have been dramatic improvements in AM design methods, process control, post-processing, material properties and material range. However, if AM is going to gain a significant market share, it must be developed into a true precision manufacturing method. The production of precision parts relies on three principles: Production is robust (i.e. all sensitive parameters can be controlled). Production is predictable (for example, the shrinkage that occurs is acceptable because it can be predicted and compensated in the design). Parts are measurable (as without metrology, accuracy, repeatability and quality assurance cannot be known). AM of metals is inherently a high-energy process with many sensitive and inter-related process parameters, making it susceptible to thermal distortions, defects and process drift. The complete modelling of these processes is beyond current computational power, and novel methods are needed to practicably predict performance and inform design. In addition, metal AM produces highly textured surfaces and complex surface features that stretch the limits of contemporary metrology. With so many factors to consider, there is a significant shortage of background material on how to inject precision into AM processes. Shortage in such material is an important barrier for a wider uptake of advanced manufacturing technologies, and a comprehensive book is thus needed. This book aims to inform the reader how to improve the precision of metal AM processes by tackling the three principles of robustness, predictability and metrology, and by developing computer-aided engineering methods that empower rather than limit AM design. Richard Leach is a professor in metrology at the University of Nottingham and heads up the Manufacturing Metrology Team. Prior to this position, he was at the National Physical Laboratory from 1990 to 2014. His primary love is instrument building, from concept to final installation, and his current interests are the dimensional measurement of precision and additive manufactured structures. His research themes include the measurement of surface topography, the development of methods for measuring 3D structures, the development of methods for controlling large surfaces to high resolution in industrial applications and the traceability of X-ray computed tomography. He is a leader of several professional societies and a visiting professor at Loughborough University and the Harbin Institute of Technology. Simone Carmignato is a professor in manufacturing engineering at the University of Padua. His main research activities are in the areas of precision manufacturing, dimensional metrology and industrial computed tomography. He is the author of books and hundreds of scientific papers, and he is an active member of leading technical and scientific societies. He has been chairman, organiser and keynote speaker for several international conferences, and received national and international awards, including the Taylor Medal from CIRP, the International Academy for Production Engineering.
Download or read book Selective Laser Melting written by Prashanth Konda Gokuldoss and published by MDPI. This book was released on 2020-04-03 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is one of the manufacturing processes that warrants the attention of industrialists, researchers, and scientists. AM has the ability to fabricate materials to produce parts with complex shapes without any theoretical restrictions combined with added functionalities. Selective laser melting (SLM), also known as laser-based powder bed processing (LPBF), is one of the main AM process that can be used to fabricate wide variety of materials that are Al-, Ti-, Fe-, Ni-, Co-, W-, Ag-, and Au-based, etc. However, several challenges need to be addressed systematically, such as development of new materials that suit the SLM process conditions so the process capabilities can be fully used to produce new properties in these materials. Other issues in the field are the lack of microstructure–property correlations, premature failure, etc. Accordingly, this Special Issue (book) focuses mainly on the microstructure-correlation in three different alloys: AlSi10Mg, Ti6Al4V, and 304L stainless steel, where six articles are presented. Hence, this Special Issue outlines microstructure–property correlations in the SLM processed materials and provides a value addition to the field of AM.
Download or read book Advanced Structural Materials written by Winston O. Soboyejo and published by CRC Press. This book was released on 2006-12-21 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: A snapshot of the central ideas used to control fracture properties of engineered structural metallic materials, Advanced Structural Materials: Properties, Design Optimization, and Applications illustrates the critical role that advanced structural metallic materials play in aerospace, biomedical, automotive, sporting goods, and other indust
Download or read book Welding Metallurgy written by Sindo Kou and published by John Wiley & Sons. This book was released on 2003-03-31 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to include new technological advancements in welding Uses illustrations and diagrams to explain metallurgical phenomena Features exercises and examples An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.
Download or read book Molecular and Genetic Perspectives of Cold Tolerance in Plants written by Yingfang Zhu and published by Frontiers Media SA. This book was released on 2022-11-25 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. - Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy - Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. - Includes a critical review of the current key fundamental and technical issues of Ti PM. - Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
Download or read book Superalloys 2020 written by Sammy Tin and published by Springer Nature. This book was released on 2020-08-28 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Symposium on Superalloys (Superalloys 2020) highlights technologies for lifecycle improvement of superalloys. In addition to the traditional focus areas of alloy development, processing, mechanical behavior, coatings, and environmental effects, this volume includes contributions from academia, supply chain, and product-user members of the superalloy community that highlight technologies that contribute to improving manufacturability, affordability, life prediction, and performance of superalloys.
Download or read book Mechanical Engineering written by Sasan Dadbakhsh and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Selective laser melting (SLM) is an additive manufacturing technique to produce complex three-dimensional parts through solidifying successive layers of powder materials on top of each other, from the bottom to top. The powder base nature allows the SLM to process a wide variety of materials and their mixtures and fabricate advanced and complicated composite parts. However, the SLM is a newly established process and seeks detailed scientific studies to develop new materials systems for the consumption of industry. These scientific studies are particularly important because of many issues associated with the SLM process, such as porosity, balling, delamination, thermal stress, etc, which can be varied from one material system to another. This PhD project aims to elucidate the fundamental mechanisms governing the microstructure and mechanical properties of the metallic and in-situ AI matrix composite parts made by SLM. The research starts with a preliminary study on SLM of stainless steel in order to explore the usage of SLM machine and related parameters. It illustrates the effect of part layout on the quality of products. The main research focuses on the in-situ formation ofparticulate reinforced AI matrix by using SLM of AIIFe203 powder mixture. It is a pioneering research to integrate in-situ interaction with laser melting to produce advanced AI composites. It investigates the mechanisms governing SLM assisted in-situ reaction and also the effects of various parameters such as SLM layer thickness, laser power and scanning speed as well as·the proportion ofFe203. It examines the influence of AI alloy powder and it describes the effect ofhot isostatic pressing (HIP) post-treatment. The physical, mechanical, and metallurgical properties of the products are extensively assessed using various techniques. The processing windows of the process are sketched. The findings demonstrate unique microstructural features due to combined in-situ reaction and laser rapid consolidation, and contribute to provision of an in-depth scientific understanding of novel AI matrix composites by using SLM assisted in-situ processes. As part of this PhD project, industrial collaborative research has also been conducted to characterise the surface finish, metallurgical quality, process accuracy and mechanical properties of various SLM made metallic parts using AI, Ti, stainless steel, and super alloys. This part of research has generated scientific data and results for industrial applications ofmetallic fabrication using SLM.
Download or read book Metal Additive Manufacturing written by Dyuti Sarker and published by John Wiley & Sons. This book was released on 2021-10-26 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: METAL ADDITIVE MANUFACTURING A comprehensive review of additive manufacturing processes for metallic structures Additive Manufacturing (AM)—also commonly referred to as 3D printing—builds three-dimensional objects by adding materials layer by layer. Recent years have seen unprecedented investment in additive manufacturing research and development by governments and corporations worldwide. This technology has the potential to replace many conventional manufacturing processes, enable the development of new industry practices, and transform the entire manufacturing enterprise. Metal Additive Manufacturing provides an up-to-date review of all essential physics of metal additive manufacturing techniques with emphasis on both laser-based and non-laser-based additive manufacturing processes. This comprehensive volume covers fundamental processes and equipment, governing physics and modelling, design and topology optimization, and more. The text adresses introductory, intermediate, and advanced topics ranging from basic additive manufacturing process classification to practical and material design aspects of additive manufacturability. Written by a panel of expert authors in the field, this authoritative resource: Provides a thorough analysis of AM processes and their theoretical foundations Explains the classification, advantages, and applications of AM processes Describes the equipment required for different AM processes for metallic structures, including laser technologies, positioning devices, feeder and spreader mechanisms, and CAD software Discusses the opportunities, challenges, and current and emerging trends within the field Covers practical considerations, including design for AM, safety, quality assurance, automation, and real-time control of AM processes Includes illustrative cases studies and numerous figures and tables Featuring material drawn from the lead author’s research and professional experience on laser additive manufacturing, Metal Additive Manufacturing is an important source for manufacturing professionals, research and development engineers in the additive industry, and students and researchers involved in mechanical, mechatronics, automatic control, and materials engineering and science.
Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2017-11-22 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly proposed criteria to predict the glass-forming ability of alloys have been discussed. All other areas covered in this book have been updated, with special emphasis on topics where significant advances have occurred. These include processing of hierarchical surface structures and synthesis of nanophase composites using the chemical behavior of bulk metallic glasses and the development of novel bulk metallic glasses with high-strength and high-ductility and superelastic behavior. New topics such as high-entropy bulk metallic glasses, nanoporous alloys, novel nanocrystalline alloys, and soft magnetic glassy alloys with high saturation magnetization have also been discussed. Novel applications, such as metallic glassy screw bolts, surface coatings, hyperthermia glasses, ultra-thin mirrors and pressure sensors, mobile phone casing, and degradable biomedical materials, are described. Authored by the world’s foremost experts on bulk metallic glasses, this new edition endures as an indispensable reference and continues to be a one-stop resource on all aspects of bulk metallic glasses.
