Download or read book GB T 50561 2010 English Translation of Chinese Standard written by https://www.codeofchina.com and published by https://www.codeofchina.com. This book was released on with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1.0.1 This code is formulated with a view to guiding the equipment installing and acceptance of Chinese building material industry, ensuring the quality and safety of equipment installation, promoting the technological progress and standardization process, as well as improving economic benefits. 1.0.2 This code is applicable to the equipment installing and acceptance of predecomposition production line in cement industry, float glass production line and building sanitary ceramics production line from foundation acceptance to equipment no-load test run in newly-built, reconstructed and expanded projects. 1.0.3 The installing and acceptance of continuous conveying equipment, fan and pump equipment as well as crane in cement plant, flat glass plant and building sanitary ceramics plant which are not involved in this code, shall be in accordance with the relevant requirements of the current national standards "Code for Construction and Acceptance of Continuous Conveyer Equipment Installation Engineering" (GB 50270), "Code for Construction and Acceptance of Computer, Fan and Pump Installation Engineering" (GB 50275) and "Code for Construction and Acceptance of Crane Installation Engineering" (GB 50278) respectively. The installing and acceptance of other equipment not involved shall be in accordance with the relevant requirements of the current national standard "General Code for Construction and Acceptance of Mechanical Equipment Installation Engineering" (GB 50231).The installing and acceptance of mechanical equipment with specific requirements and beyond this code shall be in accordance with the relevant requirements of random documents. 1.0.4 The installing and acceptance of electric system and control system for equipment shall be in accordance with the relevant requirements of the current professional standard "Specification for Construction Quality Checkout and Evaluation of Electric equipment" (DL/T 5161.1-17). If there is any special requirement, the installing and acceptance shall be in accordance with the relevant requirements of the random documents of equipment. 1.0.5 The refractory material for building relevant kilns in cement plant, flat glass plant and building sanitary ceramics plant shall not only meet the special requirements in the text of this code, but also comply with the requirements of the current national standard "Code for Construction and Acceptance of Industrial Furnaces Building" (GB 50211). The refractory material with special requirements and new designations shall meet the requirements of product specification. 1.0.6 The installing shall not only meet the requirements of this code, but also comply with the relevant national requirements of safety technology, labor protection, fire prevention and cleaner production. The power utilization of mechanical equipment under installation shall meet the current safety standards and codes for power supply and utilization at construction site. 1.0.7 The wastes generated during installation shall be stored and disposed collectively. The toxic or potential toxic wastes shall be treated according to the requirements of the current national standard "Standard for Pollution Control on Hazardous Waste Storage" (GB 18597), and the treatment processes and results shall be reported to the relevant national administrative departments in written form. 1.0.8 This code specifies the basic technical requirements for the equipment installing and acceptance of building material industry. If this code conflicts with the requirements of the national laws and administrative regulations, the national laws and administrative regulations shall apply. 1.0.9 The equipment installing and acceptance of building material industry shall not only meet the requirements of this code, but also comply with those specified in the current relevant national standards.

Download or read book The Rough Guide to Finland written by Roger Norum and published by Penguin. This book was released on 2010-06-01 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Rough Guide to Finland is the essential companion to this fascinating Scandinavian country with clear maps and coverage of all the best attractions. Packed with stunning photography and illustrations, explore the must-see highlights from the best summer and winter activities - including skiing, snowmobiling and reindeer and husky driving - to the remote villages that come to life in the summertime, with beaches, lake cruises and island hopping. Find detailed accounts of all Finland's major tourist attractions, including the cultural capitals of Helsinki, Turku and Tampere and the laconic seaside towns along Finland's southern and western coast, as well as sections on Finnish design and The great outdoors. You'll find informed, practical advice on what to see and do whilst relying on countless recommendations for Finland's best restaurants, bars, cafés, shops and hotels for every budget and style. With authoritative background on Finland's intricate history and expert tips on how to get around the beautiful national parks, this is your must-have guide. Make the most of your holiday with The Rough Guide to Finland.

Download or read book GB T 9115 2010 English translated version written by Codeofchina and published by https://www.codeofchina.com. This book was released on 2011-10-01 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: GB/T 9115-2010 Code of Bills of Quantities and Valuation for Construction Works English-translated version

Download or read book GB T 25978 2010 Translated English of Chinese Standard GBT 25978 2010 GB T25978 2010 GBT25978 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-01-17 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the definition, performance requirements and test methods of plates and labels used on road vehicles for the descriptions of vehicle information.

Download or read book GB T 20564 4 2010 Translated English of Chinese Standard GBT 20564 4 2010 GB T20564 4 2010 GBT20564 4 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-10-14 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, sample preparation, test for physical properties of covers, penetration analysis determination method for inside liners of tyres, test for physical properties of inner tubes and test for physical properties of flaps for test methods for measuring physical properties of pneumatic tyres (covers, inner tubes and flaps).

Download or read book GB 50573 2010 English translated version written by Codeofchina.com and published by www.codeofchina.com. This book was released on 2010-12-01 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: GB 50573-2010 Standard examination methods for drinking water - Pesticides parameters English-translated version

Download or read book The Australian Official Journal of Trademarks written by and published by . This book was released on 1906 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tax Shelter Registration written by United States. Internal Revenue Service and published by . This book was released on 1987 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book GB T 25998 2010 Translated English of Chinese Standard GBT 25998 2010 GB T25998 2010 GBT25998 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-03-13 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the classification and marking, requirements, test methods, inspection rules, marks and labels, packaging, transportation and storage of mineral wool decorating and acoustic ceilings.

Download or read book GB T 17685 2016 Translated English of Chinese Standard GBT17685 2016 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-03-06 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, requirements, test methods, judgment rules, marking, packaging, transportation and storage of down and feather. This Standard applies to the production, processing and trade of down and feather.

Download or read book GB T 6172 2 2016 Translated English of Chinese Standard GBT 6172 2 2016 GB T6172 2 2016 GBT6172 2 2016 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-03-18 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 6172 specifies the type and dimension, technical conditions and markings of prevailing torque type hexagon thin nuts (with non-metallic insert).

Download or read book GB T 26040 2010 Translated English of Chinese Standard GB T26040 2010 GBT 26040 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-08-21 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies technical requirements, test methods, inspection rules and signs, packaging, transportation, storage, quality certificates and contract (or purchase order) content of sodium stannate products. This Standard applies to sodium stannate products produced from metallic tin or tin-containing materials, sodium hydroxide and sodium nitrate.

Download or read book GB T 17793 2010 Translated English of Chinese Standard GBT 17793 2010 GB T17793 2010 GBT17793 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-04-17 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies dimensions and tolerances for wrought copper and copper alloy plate, sheet and strip. This Standard is applicable to wrought copper and copper alloy plate, sheet and strip for general purposes.

Download or read book GB T 6172 1 2016 Translated English of Chinese Standard GBT 6172 1 2016 GB T6172 1 2016 GBT6172 1 2016 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-12-24 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 617 specifies the types and dimensions, technical specifications and marking of hexagon thin nuts.

Download or read book GB T 10088 2018 Translated English of Chinese Standard GBT 10088 2018 GB T10088 2018 GBT10088 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-11-16 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the module and diameter of cylindrical worm. This Standard applies to worms of cylindrical worm gears.

Download or read book GB T 19363 1 2008 Translated English of Chinese Standard GBT 19363 1 2008 GB T19363 1 2008 GBT19363 1 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-08-02 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 19363.1 specifies the translation services - translation services specifications. This Part is applicable to translation services.

Download or read book GB T 9969 2008 Translated English of Chinese Standard GB T9969 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-11-05 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the basic requirements and preparation methods of instructions for use of industrial products. This standard applies to the preparation methods of instructions for use of industrial products for non-consumer products. This standard can also be applied to other forms of instructions for use.