Download or read book GB T 28046 5 2013 Translated English of Chinese Standard GBT 28046 5 2013 GB T28046 5 2013 GBT28046 5 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-06-18 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 28046 describes the chemical loads that may be encountered by systems/components installed at specific locations on/in the vehicle; and specifies the test and requirements. This Part is applicable to the automotive electrical and electronic systems/components. This Part is not applicable to the electrical and electronic systems/components that are continuously exposed to chemical reagents.

Download or read book GB T 30240 1 2013 English translated version written by Codeofchina.com and published by www.codeofchina.com. This book was released on 2014-07-15 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: GB/T 30240.1-2013 Rolling bearings - Accessories - Part 1: Tapered sleeves English-translated version

Download or read book GB T 28046 1 2011 Translated English of Chinese Standard GBT 28046 1 2011 GB T28046 1 2011 GBT28046 1 2011 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-12-07 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location of systems/components on/in the vehicle.

Download or read book GB 30000 5 2013 Translated English of Chinese Standard GB30000 5 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-09-09 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB 30000 specifies the terms and definitions, classification criteria, decision logic and guidance, and labels of Oxidizing gases. This Part is applicable to the classification and labelling of Oxidizing gases according to the United Nations.

Download or read book GB T 30332 2013 Translated English of Chinese Standard GBT 30332 2013 GB T30332 2013 GBT30332 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-08-31 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the warehouse receipt.

Download or read book GB GB T GBT Chinese Standard English translated version Catalog002 written by CODEOFCHINA - Dr. Meng Yongye and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3871 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com

Download or read book GB T 13914 2013 Translated English of Chinese Standard GBT 13914 2013 GB T13914 2013 GBT13914 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-11-13 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the dimensional tolerance grade, code, tolerance value and deviation value of metal stamping parts. This Standard is applicable to the blanking parts and stamping parts for metal plates.

Download or read book GB GB T GBT Chinese Standard English translated version Catalog written by Dr. Meng Yongye and published by www.codeofchina.com. This book was released on 2018-05-03 with total page 3290 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com

Download or read book GB T 17625 7 2013 Translated English of Chinese Standard GBT 17625 7 2013 GB T17625 7 2013 GBT17625 7 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-10-26 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part is concerned with the emission of voltage changes, voltage fluctuations and flicker produced by equipment and impressed on the public low-voltage supply system. This Part specifies the limits of voltage changes produced by equipment tested under specified conditions. This Part is primarily applicable to electrical and electronic equipment having a rated input current from 16 A up to and including 75 A, which is intended to be connected to public low-voltage distribution systems having nominal system voltages of 220 V, line-to-neutral at 50 Hz, and which is subject to conditional connection.

Download or read book GB T 2893 5 2020 Translated English of Chinese Standard GBT2893 5 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-06-06 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 2893 specifies the principles and requirements for selecting, combining, setting safety signs in actual use. This Part applies to safety signs, which are used in public places, workplaces or public buildings, other than private residences.

Download or read book GB T 2423 30 2013 Translated English of Chinese Standard GBT2423 30 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-01-06 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 2423 is applicable to the test, in which the test sample is immersed in a cleaning solvent, at a specified temperature, within a specified time. If required by the relevant specifications, the test sample shall be wiped by absorbent cotton or tissue paper, after immersion and drying.

Download or read book GB T 19363 1 2008 Translated English of Chinese Standard GBT 19363 1 2008 GB T19363 1 2008 GBT19363 1 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-08-02 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 19363.1 specifies the translation services - translation services specifications. This Part is applicable to translation services.

Download or read book GB T 4857 5 1992 Translated English of Chinese Standard GBT4857 5 1992 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-04-20 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the main performance requirements, test procedures, test report contents of the test equipment, which is used in the vertical impact test of the transport package. This standard applies to the assessment of the impact strength of the transport package, when subjected to vertical impact, AND the ability of the package to protect the contents. It can be used as a single test or as part of a series of tests.

Download or read book GB T 6175 2016 Translated English of Chinese Standard GBT 6175 2016 GB T6175 2016 GBT6175 2016 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-01-08 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies type sizes, technical conditions and marks of hexagon nuts, style 2.

Download or read book GB T 16507 4 2013 Translated English of Chinese Standard GBT 16507 4 2013 GB T16507 4 2013 GBT16507 4 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-05-06 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 16507 specifies the strength calculation of pressure parts used in water-tube boilers and the designed permissible stress of materials, and determines the method for verifying the maximum permissible working pressure of parts. This part is applicable to the pressure parts of water-tube boilers defined in GB/T 16507.1, including boiler drum, header drum, tube, pipeline within the range of boiler, convex head, flat lid and cover plate, tee joint and other non-rectangular components.

Download or read book GB T 18204 1 2013 Translated English of Chinese Standard GBT 18204 1 2013 GB T18204 1 2013 GBT18204 1 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-01-24 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 18204 specifies the measurement method of physical factors in public places. This part applies to the determination of physical factors in public places, other places, rooms and other indoor environments can be implemented with reference to this part.

Download or read book GB T 35975 2018 Translated English of Chinese Standard GBT 35975 2018 GB T35975 2018 GBT35975 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-01-13 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the common classification of load lifting attachments. This Standard is applicable to the load lifting attachments.