Download or read book Gas Thermohydrodynamic Lubrication and Seals written by Bai Shaoxian and published by Academic Press. This book was released on 2019-07-10 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas Thermohydrodynamic Lubrication and Seals provides contemporary theory and methods for thermo-hydrodynamic lubrication analysis in the design of gas bearings and seals. The title includes information on gas state equations and gas property, derivation of gas thermohydrodynamic lubrication equations, the theory of isothermal gas lubrication, thermal gas lubrication of rigid surfaces, gas thermoelastic hydrodynamic lubrication of face seals, vapor-condensed gas lubrication of face seals, experimental methods, and the design of gas face seals. Readers will find state-of-the-art, practical knowledge based on fifty years of research and application. Describes thermohydrodynamic lubrication analysis for the design of gas bearings and seals Considers the increased operational speed, pressure and temperature of mechanical equipment in relation to gas bearings and seals Describes multi-field coupled gas lubrication theory and analytical methods Provides a model and detailed data on the lubricating properties of typical gas bearings and seals Gives comprehensive coverage of the field based on a half-century of research and application
Download or read book Gas Lubrication written by Virgiliu Niculae Constantinescu and published by . This book was released on 1969 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by NASA Office of Management Scientific a. This book was released on 1991 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by CRC Press. This book was released on 2004-03-15 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.
Download or read book Lubrication Fundamentals written by Don M. Pirro and published by CRC Press. This book was released on 2001-08-28 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the cornerstone of the first edition, Lubrication Fundamentals Second Edition outlines the emergence of higher performance-specialty application oils and greases and emphasizes the need for lubrication and careful lubricant selection. Thoroughly updated and rewritten since the previous edition reached its 10th printing, the book discuss
Download or read book Fluid Film Lubrication written by Andras Z. Szeri and published by Cambridge University Press. This book was released on 2010-12-27 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid film bearings are machine elements that should be studied within the broader context of tribology. The three subfields of tribology - friction, lubrication, and wear - are strongly interrelated. The last decade has witnessed significant advances in the area of fluid film lubrication and its applications, and this second edition offers a look at some of these advances. This edition adds to the fundamentals of fluid film lubrication, a discourse on surface effects and the inclusion of treatment of flow with significant inertia within the section on turbulence. Basic ideas of the multigrid method are conveyed along with multilevel multi-integration in the treatment of elastohydrodynamic lubrication. New chapters have been included on ultra-thin films, both liquid and gaseous, and lubrication of articulating joints and their replacement. Some of the most recent literature is discussed.
Download or read book Lubrication written by A. R. Lansdown and published by Elsevier. This book was released on 2013-10-22 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubrication: A Practical Guide to Lubricant Selection provides a guide to modern lubrication practice in industry, with emphasis on practical application, selection of lubricants, and significant factors that determine suitability of a lubricant for a specific application. Organized into 13 chapters, this book begins with a brief theoretical opening chapter on the basic principles of lubrication. A chapter then explains the choice of lubricant type, indicating how to decide whether to use oil, grease, dry lubricant, or gas lubrication. Subsequent chapters deal with detailed selection of lubricating oils, oil systems, oil changing, greases, dry lubricants, gas lubrication, sealing, testing, monitoring, and handling of lubricants. The final chapter describes the main hazards associated with lubricants and some of the techniques for controlling those hazards. This book will be of value to technical staffs who use lubricants in their work; to students of mechanical, production, or maintenance engineering; and to others, such as buyers and storekeepers concerned with lubricants.
Download or read book Lubrication of Corrosion resistant Alloys by Mixtures of Halogen containing Gases at Temperatures Up to 1200 F written by Donald H. Buckley and published by . This book was released on 1959 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Second International Symposium on Gas Lubrication presented at ASME Spring Lubrication Symposium Las Vegas Nevada June 17 20 1968 written by International Symposium on Gas Lubrication and published by . This book was released on 1969 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lubricants and Lubrication written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-02-10 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
Download or read book Mechanics and Chemistry in Lubrication written by A. Dorinson and published by Elsevier. This book was released on 1985-08-01 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although it is widely recognized that friction, wear and lubrication are linked together in a single interdisciplinary complex of scientific learning and technological practice, fragmented and specialized approaches still predominate. In this book, the authors examine lubrication from an interdisciplinary viewpoint. They demonstrate that once the treatment of lubrication is released from the confines of the fluid film concept, this interdisciplinary approach comes into full play. Tribological behavior in relation to lubrication is then examined from two major points of view: one is mechanical, not only with respect to the properties and behavior of the lubricant but also of the surfaces being lubricated. The other is chemical and encompasses the chemistry of the lubricant, the surfaces and the ambient surroundings. It is in the emphasis on the interaction of the basic mechanical and chemical processes in lubrication that this book differs from conventional treatments.
Download or read book Lubrication and Lubricant Selection written by A. R. Lansdown and published by American Society of Mechanical Engineers. This book was released on 2004 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author provides guidance to lubrication practice in industry, with the emphasis on practical application. He covers the appropriate selection of lubricants for a wide range of uses and the factors that determine their suitability. Topics include: basic principles of lubrication; selection of lubricating oils; oil supply and systems, oil changing, and conservation; greases and anti-seizes; dry bearings, solid lubrication, and gas bearings; sealing; lubricant testing, specification, monitoring, handling and storage; health and safety.
Download or read book Lubricants and Lubrication 2 Volume Set written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
Download or read book Numerical Calculation of Lubrication written by Ping Huang and published by John Wiley & Sons. This book was released on 2013-07-19 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on basic lubrication problems this book offers specific engineering applications. The book introduces methods and programs for the most important lubrication problems and their solutions. It is divided into four parts. The first part is about the general solving methods of the Reynolds equation, including solutions of Reynolds equations with different conditions and their discrete forms, such as a steady-state incompressible slider, journal bearing, dynamic bearing, gas bearing and grease lubrication. The second part gives the ‘energy equation solution’. The third part introduces methods and programs for elasto-hydrodynamic lurbication, which links the Reynolds equation with the elastic deformation equation. The final part presents application lubrication programs used in engineering. Provides numerical solution methodologies including appropriate software for the hydrodynamic and elasto-hydrodynamic lubrication of bearings Offers a clear introduction and orientation to all major engineering lubrication problems and their solutions Presents numerical programs for specific applications in engineering, with special topics including grease-lubricated bearings and gas bearings Equips those working in tribology and those new to the topic with the fundamental tools of calculation Downloadable programs are available at the companion website With an emphasis on clear explanations, the text offers a thorough understanding of the numerical calculation of lubrication for graduate students on tribology and engineering mechanics courses, with more detailed materials suitable for engineers. This is an accessible reference for senior undergraduate students of tribology and researchers in thin-film fluid mechanics.
Download or read book Principles of Tribology written by Shizhu Wen and published by John Wiley & Sons. This book was released on 2017-05-30 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to include the timely and important topics of MEMS and rolling friction, Principles of Tribology is a compilation of current developments from tribology research, coupled with tribology fundamentals and applications. Essential topics include lubrication theory, lubrication design, friction mechanism, wear mechanism, friction control, and their applications. Besides classical tribology content, the book also covers intersecting research areas of tribology, as well as the regularities and characteristics of the tribological phenomena in practice. Furthermore, it presents the basic theory, numerical analysis methods and experimental measuring techniques of tribology as well as their application in engineering. Newly expanded and updated to include new tribological material on MEMS and green tribology, its key concepts and applications Systematically brings the reader through fundamental theories, basic mechanisms through to the latest research Emphasizes practical tribological phenomena, supported by numerical analysis and experimental measurement techniques Discusses nano-tribology, thin film lubrication and its applications, topics which are growing in importance A comprehensive look at the fundamentals and latest research, this second edition of Principles of Tribology is an essential textbook for graduate and senior undergraduate students specializing in tribology and related mechanical engineering fields.
Download or read book Lubrication Corrosion and Wear written by United States. National Aeronautics and Space Administration Scientific and Technical Information Division and published by . This book was released on 1966 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rotordynamics of Gas Lubricated Journal Bearing Systems written by Krzysztof Czolczynski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: A discussion of models for the behaviour of gas bearings, particularly of the aspects affecting the stability of the system. The text begins with a discussion of the mathematical models, identifying the stiffness and damping coefficients, and describing the behaviour of the models in unstable regions. It then turns to apply these results to bearings: static characteristics and stability of various rotor systems and an extensive discussion of air rings.