Download or read book Fundamentals of Tribology and Bridging the Gap Between the Macro and Micro Nanoscales written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2001-03-31 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt: The word tribology was fIrst reported in a landmark report by P. Jost in 1966 (Lubrication (Tribology)--A Report on the Present Position and Industry's Needs, Department of Education and Science, HMSO, London). Tribology is the science and technology of two interacting surfaces in relative motion and of related subjects and practices. The popular equivalent is friction, wear and lubrication. The economic impact of the better understanding of tribology of two interacting surfaces in relative motion is known to be immense. Losses resulting from ignorance of tribology amount in the United States alone to about 6 percent of its GNP or about $200 billion dollars per year (1966), and approximately one-third of the world's energy resources in present' use, appear as friction in one form or another. A fundamental understanding of the tribology of the head-medium interface in magnetic recording is crucial to the future growth of the $100 billion per year information storage industry. In the emerging microelectromechanical systems (MEMS) industry, tribology is also recognized as a limiting technology. The advent of new scanning probe microscopy (SPM) techniques (starting with the invention of the scanning tunneling microscope in 1981) to measure surface topography, adhesion, friction, wear, lubricant-fIlm thickness, mechanical properties all on a micro to nanometer scale, and to image lubricant molecules and the availability of supercomputers to conduct atomic-scale simulations has led to the development of a new fIeld referred to as Microtribology, Nanotribology, or Molecular Tribology (see B. Bhushan, J. N. Israelachvili and U.

Download or read book Fundamentals of Tribology and Bridging the Gap Between the Macro and Micro Nanoscales written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: The word tribology was fIrst reported in a landmark report by P. Jost in 1966 (Lubrication (Tribology)--A Report on the Present Position and Industry's Needs, Department of Education and Science, HMSO, London). Tribology is the science and technology of two interacting surfaces in relative motion and of related subjects and practices. The popular equivalent is friction, wear and lubrication. The economic impact of the better understanding of tribology of two interacting surfaces in relative motion is known to be immense. Losses resulting from ignorance of tribology amount in the United States alone to about 6 percent of its GNP or about $200 billion dollars per year (1966), and approximately one-third of the world's energy resources in present' use, appear as friction in one form or another. A fundamental understanding of the tribology of the head-medium interface in magnetic recording is crucial to the future growth of the $100 billion per year information storage industry. In the emerging microelectromechanical systems (MEMS) industry, tribology is also recognized as a limiting technology. The advent of new scanning probe microscopy (SPM) techniques (starting with the invention of the scanning tunneling microscope in 1981) to measure surface topography, adhesion, friction, wear, lubricant-fIlm thickness, mechanical properties all on a micro to nanometer scale, and to image lubricant molecules and the availability of supercomputers to conduct atomic-scale simulations has led to the development of a new fIeld referred to as Microtribology, Nanotribology, or Molecular Tribology (see B. Bhushan, J. N. Israelachvili and U.

Download or read book Fundamentals of Tribology written by R Gohar and published by World Scientific Publishing Company. This book was released on 2008-07-29 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many occasions when quick solutions to problems in tribology are needed. For example, an understanding of the lubrication mechanism in a racing car engine has led to an improvement in performance. Why does a woman's face cream make her look younger for a time? Tribologists are frequently summoned in legal cases as expert witnesses after people have slipped in public places. Improvements to the human artificial hip joint are also partly a result of extensive tribology research. In order to solve such problems, tribology should be regarded as an important undergraduate course. This book covers tribology in such a way as to provide simple approximate solutions to frequent practical problems. Unlike previous books, which catered for earlier generations of undergraduates, today's students generally have sophisticated computer systems available in their colleges. Therefore, many of the worked and set examples in the book are made easier by using readily available software such as Math CAD. Readers will thus gain practice in using it, and will benefit in general by understanding the mathematical principles involved in the solutions. This book is particularly useful to engineering undergraduates and practicing engineers needing a quick solution to tribological problems. Contents:Introduction to TribologyThe Nature of Rough SurfacesElastic Solids in Normal ContactDry Friction and WearLubricant PropertiesThe Reynolds and Energy EquationsThrust BearingsJournal BearingsExternally Pressurized (EP) BearingsElastohydrodynamic Lubrication (EHL)Fatigue Life of Rolling Element BearingsTransient Elastohydrodynamic LubricationNano-TribologyBio-Tribology Readership: Advanced undergraduates and PhD students starting their research; practicing engineers and scientists in industry.

Download or read book Fundamentals of tribology and bridging the gap between the macro and micro nanoscales abstracts NATO Advanced Study Institute ASI August 13 August 25 2000 Keszthely Hungary written by Bharat Bhushan and published by . This book was released on 2001 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micro and Nanoscale Phenomena in Tribology written by Yip-Wah Chung and published by CRC Press. This book was released on 2011-10-19 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawn from presentations at a recent National Science Foundation Summer Institute on Nanomechanics, Nanomaterials, and Micro/Nanomanufacturing, Micro- and Nanoscale Phenomena in Tribology explores the convergence of the multiple science and engineering disciplines involved in tribology and the connection from the macro to nano world. Written by specialists from computation, materials science, mechanical engineering, surface physics, and chemistry, each chapter provides up-to-date coverage of both basic and advanced topics and includes extensive references for further study. After discussing the evolution of tribology in the micro and nano world, the book describes contact conditions spanning between macroscale and nanoscale contacts. It presents an overview of fundamental continuum treatments of interfacial contact and lubrication under a wide range of conditions, including novel advances in contact simulation. It also gives a thorough account of the nature of surface energies and forces in nanostructures as well as adhesion in dry and wet environments. The book then explains how to perform friction measurements at the nanoscale and interpret friction data before demonstrating how micro- and nanotextured surfaces affect adhesion, friction, and wetting. The final chapters emphasize the importance of surface chemistry and molecular dynamics simulation in tribology. With numerous examples and figures throughout, this volume presents a thorough account of important advancements in tribology that offer insight into micro- and nanoscale phenomena. By enabling a better understanding of fundamental micro- and nanoscale interactions, the book helps readers effectively design and fabricate durable tribological components for various engineering and biological systems.

Download or read book Introduction to Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 2002-08-01 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coverage of critical cutting-edge topics including MEMS, nanotribology and magnetic surface storage technologies. * Integrates the knowledge of tribology from mechanical engineering, mechanics, and materials science points of view. * Covers both the underlying theory and the current applications of tribology to industry.

Download or read book Tribology on the Small Scale written by C. Mathew Mate and published by Oxford University Press. This book was released on 2019-08-30 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction, lubrication, adhesion, and wear are prevalent physical phenomena in everyday life and in many key technologies. This book incorporates a bottom-up approach to friction, lubrication, and wear into a versatile textbook on tribology. This is done by focusing on how these tribological phenomena occur on the small scale — the atomic to the micrometer scale — a field often called nanotribology. The book covers the microscopic origins of the common tribological concepts of roughness, elasticity, plasticity, friction coefficients, and wear coefficients. Some macroscale concepts (like elasticity) scale down well to the micro- and atomic-scale, while other macroscale concepts (like hydrodynamic lubrication) do not. In addition, this book also has chapters on topics not typically found in tribology texts: surface energy, surface forces, lubrication in confined spaces, and the atomistic origins of friction and wear. These chapters cover tribological concepts that become increasingly important at the small scale: capillary condensation, disjoining pressure, contact electrification, molecular slippage at interfaces, atomic scale stick-slip, and atomic bond breaking. Throughout the book, numerous examples are provided that show how a nanoscale understanding of tribological phenomena is essential to the proper engineering of important modern technologies such as MEMS, disk drives, and nanoimprinting. For the second edition, all the chapters have been revised and updated to incorporate the most recent advancements in nanoscale tribology. Another important enhancement to the second edition is the addition of problem sets at the end of each chapter.

Download or read book Handbook of Micro Nano Tribology written by Bharat Bhushan and published by CRC Press. This book was released on 2020-10-28 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Handbook of Micro/Nanotribology addresses the rapid evolution within this field, serving as a reference for the novice and the expert alike. Two parts divide this handbook: Part I covers basic studies, and Part II addresses design, construction, and applications to magnetic storage devices and MEMS. Discussions include: surface physics and methods for physically and chemically characterizing solid surfaces roughness characterization and static contact models using fractal analysis sliding at the interface and friction on an atomic scale scratching and wear as a result of sliding nanofabrication/nanomachining as well as nano/picoindentation lubricants for minimizing friction and wear surface forces and microrheology of thin liquid films measurement of nanomechanical properties of surfaces and thin films atomic-scale simulations of interfacial phenomena micro/nanotribology and micro/nanomechanics of magnetic storage devices This comprehensive book contains 16 chapters contributed by more than 20 international researchers. In each chapter, the presentation starts with macroconcepts and then lead to microconcepts. With more than 500 illustrations and 50 tables, Handbook of Micro/Nanotribology covers the range of relevant topics, including characterization of solid surfaces, measurement techniques and applications, and theoretical modeling of interfaces. What's New in the Second Edition? New chapters on: AFM instrumentation Surface forces and adhesion Design and construction of magnetic storage devices Microdynamical devices and systems Mechanical properties of materials in microstructure Micro/nanotribology and micro/nanomechanics of MEMS devices

Download or read book Applied Scanning Probe Methods III written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2006-04-28 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize of 1986 on Sc- ning Tunneling Microscopy sig- led a new era in imaging. The sc- ning probes emerged as a new i- trument for imaging with a pre- sion suf?cient to delineate single atoms. At ?rst there were two – the Scanning Tunneling Microscope, or STM, and the Atomic Force Mic- scope, or AFM. The STM relies on electrons tunneling between tip and sample whereas the AFM depends on the force acting on the tip when it was placed near the sample. These were quickly followed by the - gneticForceMicroscope,MFM,and the Electrostatic Force Microscope, EFM. The MFM will image a single magnetic bit with features as small as 10nm. With the EFM one can monitor the charge of a single electron. Prof. Paul Hansma at Santa Barbara opened the door even wider when he was able to image biological objects in aqueous environments. At this point the sluice gates were opened and a multitude of different instruments appeared. There are signi?cant differences between the Scanning Probe Microscopes or SPM, and others such as the Scanning Electron Microscope or SEM. The probe microscopes do not require preparation of the sample and they operate in ambient atmosphere, whereas, the SEM must operate in a vacuum environment and the sample must be cross-sectioned to expose the proper surface. However, the SEM can record 3D image and movies, features that are not available with the scanning probes.

Download or read book Coatings Tribology written by Kenneth Holmberg and published by Elsevier. This book was released on 2009-03-18 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface coating field is a rapidly developing area of science and technology that offers new methods and techniques to control friction and wear. New coating types are continually being developed and the potential applications in different industrial fields are ever growing, ranging from machine components and consumer products to medical instruments and prostheses. This book provides an extensive review of the latest technology in the field, addressing techniques such as physical and chemical vapour deposition, the tribological properties of coatings, and coating characterization and performance evaluation techniques. Eleven different cases are examined in close detail to demonstrate the improvement of tribological properties and a guide to selecting coatings is also provided. This second edition is still the only monograph in the field to give a holistic view of the subject and presents all aspects, including test and performance data as well as insights into mechanisms and interactions, thus providing the level of understanding vital for the practical application of coatings. * An extensive review of the latest developments in the field of surface coatings * Presents both theory and practical applications * Includes a guide for selecting coatings

Download or read book Allyl Compounds Advances in Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-06-21 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Allyl Compounds—Advances in Research and Application: 2013 Edition is a ScholarlyPaper™ that delivers timely, authoritative, and intensively focused information about ZZZAdditional Research in a compact format. The editors have built Allyl Compounds—Advances in Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about ZZZAdditional Research in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Allyl Compounds—Advances in Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Nanotribology and Nanomechanics written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 1157 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent emergence and proliferation of proximal probes, e.g. SPM and AFM, and computational techniques for simulating tip-surface interactions has enabled the systematic investigation of interfacial problems on ever smaller scales, as well as created means for modifying and manipulating nanostructures. In short, they have led to the appearance of the new, interdisciplinary fields of micro/nanotribology and micro/nanomechanics. This volume serves as a timely, practical introduction to the principles of nanotribology and nanomechanics and applications to magnetic storage systems and MEMS/NEMS. Assuming some familiarity with macrotribology/mechanics, the book comprises chapters by internationally recognized experts, who integrate knowledge of the field from the mechanics and materials-science perspectives. They cover key measurement techniques, their applications, and theoretical modelling of interfaces, each beginning their contributions with macro- and progressing to microconcepts. After reviewing the fundamental experimental and theoretical aspects in the first part, Nanotribology and Nanomechanics then treats applications. Three groups of readers are likely to find this text valuable: graduate students, research workers, and practicing engineers. It can serve as the basis for a comprehensive, one- or two-semester course in scanning probe microscopy; applied scanning probe techniques; or nanotribology/nanomechanics/nanotechnology, in departments such as mechanical engineering, materials science, and applied physics. With a Foreword by Physics Nobel Laureate Gerd Binnig Dr. Bharat Bhushan is an Ohio Eminent Scholar and The Howard D. Winbigler Professor in the Department of Mechanical Engineering, Graduate Research Faculty Advisor in the Department of Materials Science and Engineering, and the Director of the Nanotribology Laboratory for Information Storage & MEMS/NEMS (NLIM) at the Ohio State University, Columbus, Ohio. He is an internationally recognized expert of tribology and mechanics on the macro- to nanoscales, and is one of the most prolific authors. He is considered by some a pioneer of the tribology and mechanics of magnetic storage devices and a leading researcher in the fields of nanotribology and nanomechanics using scanning probe microscopy and applications to micro/nanotechnology. He is the recipient of various international fellowships including the Alexander von Humboldt Research Prize for Senior Scientists, Max Planck Foundation Research Award for Outstanding Foreign Scientists, and the Fulbright Senior Scholar Award.

Download or read book Applied Scanning Probe Methods IX written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2007-12-20 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volumes VIII, IX and X examine the physical and technical foundation for recent progress in applied scanning probe techniques. This is the first book to summarize the state-of-the-art of this technique. The field is progressing so fast that there is a need for a set of volumes every 12 to 18 months to capture latest developments. These volumes constitute a timely and comprehensive overview of SPM applications.

Download or read book Applied Scanning Probe Methods I written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2014-02-26 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining the physical and technical foundation for recent progress with this technique, Applied Scanning Probe Methods offers a timely and comprehensive overview of SPM applications, now that industrial applications span topographic and dynamical surface studies of thin-film semiconductors, polymers, paper, ceramics, and magnetic and biological materials. First it lays the theoretical background of static and dynamic force microscopies, including sensor technology and tip characterization, contributions detail applications such as macro- and nanotribology, polymer surfaces, and roughness investigations. The final part on industrial research addresses special applications of scanning force nanoprobes such as atomic manipulation and surface modification, as well as single electron devices based on SPM.

Download or read book Nanotribology and Nanomechanics II written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2011-05-30 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive reference and textbook serves as a timely, practical introduction to the principles of nanotribology and nanomechanics. Assuming some familiarity with macroscopic tribology, the book comprises chapters by internationally recognized experts, who integrate knowledge of the field from the mechanics and materials-science perspectives. They cover key measurement techniques, their applications, and theoretical modelling of interfaces, each beginning their contributions with macro- and progressing to microconcepts.

Download or read book Tribochemistry of Lubricating Oils written by Zenon Pawlak and published by Elsevier. This book was released on 2003-12-02 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: KEY FEATURES: Assists scientists, engineers and researchers in the development of a new high performance lubricant· An essential review of the state of knowledge in tribochemistry. The first book published related to tribochemistry oils DESCRIPTION: This latest title takes a new and unconventional look at engine oil as a micellar system. It is the first book of its kind to focus on the tribochemistry of oils and is thus an essential resource to practicing scientists and engineers in the petroleum industry and to all interested in the development of a superior high performance lubricant. Guaranteeing its broad appeal the book gives an invaluable review of the state of knowledge in the rapidly growing area of tribochemistry. The concept of miscelles is clearly explained along their application to stimulate the quality of engine oil, improve fuel efficiency and maintain adequate wear protection formulation. This represents a fresh approach to the formation of anti-wear tribofilms. A new look at engine design trends is given further assisting engineers in the development of a superior lubricant

Download or read book Surfactants in Tribology written by Girma Biresaw and published by CRC Press. This book was released on 2014-11-21 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface science and tribology play very critical roles in many industries. Manufacture and use of almost all consumer and industrial products rely on the application of advanced surface and tribological knowledge. The fourth in a series, Surfactants in Tribology, Volume 4 provides an update on research and development activities connecting surfactants and tribological phenomena. Written by renowned subject matter experts, the book demonstrates how improved design of surfactants can be harnessed to control tribological phenomena. Profusely illustrated and copiously referenced, the chapters also discuss novel approaches to control tribological phenomena using surfactants including green surfactants. It also discusses the underlying tribological and surface science issues relevant to many situations in diverse industries. The information in this volume provides a cutting-edge reference connecting the fields of surfactants and tribology as a way forward to novel, enhanced methods of controlling lubrication, friction, and wear. It reflects the latest developments, highlighting the relevance of surfactants in tribological phenomena in a broad range of industries. As we learn more about the connection between surfactants and tribology, new and improved ways to control lubrication, friction, and wear utilizing surfactants will emerge. This book takes us farther on the path towards this goal.