Download or read book Fundamentals Of Tribology Third Edition written by Ramsey Gohar and published by World Scientific. This book was released on 2018-07-17 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Tribology deals with the fundamentals of lubrication, friction and wear, as well as mechanics of contacting surfaces and their topography. It begins by introducing the reader to the importance of tribology in everyday life and offers a brief history of the subject. It then describes the nature of rough surfaces and the mechanics of contacting elastic solids and their deformation under load and friction in their relative motion. The book goes on to discuss the importance of lubricant rheology with respect to viscosity and density. Then, the principles of hydrodynamic lubrication are covered with derivations of the governing Reynolds and energy equations. Applications of hydrodynamic lubrication in various forms of bearings — journal bearings, thrust bearings and externally pressurised bearings — are outlined. The important and still evolving subject of elastohydrodynamic lubrication is treated in some detail, both at its fundamentals and its applications in thin shell or overlay bearings, cam-followers and internal combustion engine pistons.The fundamentals of biotribology are also covered, particularly its applications to endo-articular mammalian joints such as hip and knee joints and their arthroplasty. In addition, there is a treatment of the rapidly emerging knowledge of tribological phenomena in lightly loaded vanishing conjunctions (nanotribology), in natural systems and very small devices, such as MEMS and high density data storage media. There is also a new chapter on the rapidly emerging subject of surface texturing to promote retention of microreservoirs of lubricant, acting as microbearings and improving lubrication of otherwise poorly lubricated conjunctions.This book targets the undergraduate and postgraduate body as well as engineering professionals in industry, where often a quick solution or understanding of certain tribological fundamentals is sought. The book can also form an initial basis for those interested in research into certain aspects of tribology.
Download or read book Principles of Tribology written by Shizhu Wen and published by John Wiley & Sons. This book was released on 2012-02-21 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professors Wen and Huang present current developments in tribology research along with tribology fundamentals and applications, including lubrication theory, lubrication design, friction mechanism, wear mechanism, friction control, and their applications. In addition to classical tribology, Wen and Huang cover the research areas of the modern tribology, as well as the regularities and characteristics of tribological phenomena in practice. Furthermore, the authors present the basic theory, numerical analysis methods, and experimental measuring techniques of tribology as well as their applications in engineering. Provides a systematic presentation of tribology fundamentals and their applications Discusses the current states and development trends in tribology research Applies the applications to modern day engineering Computer programs available for download from the book’s companion site Principles of Tribology is aimed at postgraduates and senior-level undergraduates studying tribology, and can be used for courses covering theory and applications. Tribology professionals and students specializing in allied areas of mechanical engineering and materials science will also find the book to be a helpful reference or introduction to the topic. Companion website for the book: www.wiley.com/go/wen/tribology
Download or read book Fundamentals of Tribology and Bridging the Gap Between the Macro and Micro Nanoscales written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: The word tribology was fIrst reported in a landmark report by P. Jost in 1966 (Lubrication (Tribology)--A Report on the Present Position and Industry's Needs, Department of Education and Science, HMSO, London). Tribology is the science and technology of two interacting surfaces in relative motion and of related subjects and practices. The popular equivalent is friction, wear and lubrication. The economic impact of the better understanding of tribology of two interacting surfaces in relative motion is known to be immense. Losses resulting from ignorance of tribology amount in the United States alone to about 6 percent of its GNP or about $200 billion dollars per year (1966), and approximately one-third of the world's energy resources in present' use, appear as friction in one form or another. A fundamental understanding of the tribology of the head-medium interface in magnetic recording is crucial to the future growth of the $100 billion per year information storage industry. In the emerging microelectromechanical systems (MEMS) industry, tribology is also recognized as a limiting technology. The advent of new scanning probe microscopy (SPM) techniques (starting with the invention of the scanning tunneling microscope in 1981) to measure surface topography, adhesion, friction, wear, lubricant-fIlm thickness, mechanical properties all on a micro to nanometer scale, and to image lubricant molecules and the availability of supercomputers to conduct atomic-scale simulations has led to the development of a new fIeld referred to as Microtribology, Nanotribology, or Molecular Tribology (see B. Bhushan, J. N. Israelachvili and U.
Download or read book Introduction to Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 2013-02-14 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully updated version of the popular Introduction to Tribology, the second edition of this leading tribology text introduces the major developments in the understanding and interpretation of friction, wear and lubrication. Considerations of friction and wear have been fully revised to include recent analysis and data work, and friction mechanisms have been reappraised in light of current developments. In this edition, the breakthroughs in tribology at the nano- and micro- level as well as recent developments in nanotechnology and magnetic storage technologies are introduced. A new chapter on the emerging field of green tribology and biomimetics is included. Introduces the topic of tribology from a mechanical engineering, mechanics and materials science points of view Newly updated chapter covers both the underlying theory and the current applications of tribology to industry Updated write-up on nanotribology and nanotechnology and introduction of a new chapter on green tribology and biomimetics
Download or read book FUNDAMENTALS OF TRIBIOLOGY written by S. K. BASU and published by PHI Learning Pvt. Ltd.. This book was released on 2005-01-01 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and student friendly text gives a clear analysis of the fundamental aspects of the subject, starting from surface behaviour and contact phenomenon of interfacing surface. The book elaborates the types, specification and standardization and measurement of surface irregularities in evaluating triboproperties in relation to friction, lubrication and wear. Besides, it also discusses various lubricants and their selection. The text reflects the rich and varied experience of the authors in teaching, research and industry and provides real life cases encountered by them. This practice-oriented book, which contains a large number of worked-out examples, exercises and other pedagogic features, is intended as a text for undergraduate and postgraduate students of production, mechanical and design engineering. It can also be profitably used as a reference by practising engineers.
Download or read book Fundamentals of Engineering Tribology with Applications written by Harish Hirani and published by Cambridge University Press. This book was released on 2016-03-11 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is related to friction, wear and lubrication of machine elements. Tribology not only deals with the design of fluid containment systems like seals and gasket but also with the lubrication of surfaces in relative motion. This book comprehensively discusses the theories and applications of hydrodynamic thrust bearing, gas (air) lubricated bearing and elasto-hydrodynamic lubrication. It elucidates the concepts related to friction, including coefficient of friction, friction instability and stick-slip motion. It clarifies the misconception that harder and cleaner surfaces produce better results in wear. Recent developments, including online condition monitoring (an integration of moisture sensor, wear debris and oil quality sensors) and multigrid technique, are discussed in detail. The book also offers design problems and their real-life applications for cams, followers, gears and bearings. MATLAB programs, frequently asked questions and multiple choice questions are interspersed throughout for easy understanding of the topics.
Download or read book Extreme Tribology written by Ahmed Abdelbary and published by CRC Press. This book was released on 2020-01-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is an unfamiliar term for many, but is experienced by all. It is the science of friction, wear and lubrication of contacting surfaces in relative motion. The aim of this book is to introduce the fundamentals of tribology as well as its challenges in extreme operating conditions. The book comprises a historical background and an introduction to familiarize both undergraduate and postgraduate readers with such an important topic. It addresses a comprehensive coverage of classical tribology of solid contacts, friction mechanics, wear mechanisms and lubrication technologies. The tribology of polymer composites, MEMS and NEMS are explored. In addition, tribology of automotive components is presented, as are tribological applications in many practical situations.Various test methods used in evaluating wear are reviewed. Diverse techniques applied in predicting wear behavior by mathematical models, FE modeling and ANN approach are discussed. The book reviews key features of extraordinary conditions associated with, but not limited to, harsh environments, severe sliding and poor lubrication challenges. A basic understanding of failure modes in tribological systems is covered. The state-of-the-art research on tribology under these extreme conditions is extensively discussed, which will be of interest to researchers. The book highlights solutions for extreme tribology problems and provides an overview of various factors affecting tribosystems in harsh conditions.
Download or read book Tribology Friction and Wear of Engineering Materials written by Hutchings and published by Springer. This book was released on 1992 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology covers the fundamentals of tribology and the tribological response of all types of materials, including metals, ceramics, and polymers. The book provides a solid scientific foundation without relying on extensive mathematics, an approach that will allow readers to formulate appropriate solutions when faced with practical problems. Topics considered include fundamentals of surface topography and contact, friction, lubrication, and wear. The book also presents up-to-date discussions on the treatment of wear in the design process, tribological applications of surface engineering, and materials for sliding and rolling bearings. Tribology will be valuable to engineers in the field of tribology, mechanical engineers, physicists, chemists, materials scientists, and students. Features Provides an excellent general introduction to the friction, wear, and lubrication of materials Presents a balanced comparison of the tribological behavior of metals, ceramics, and polymers Includes discussions on tribological applications of surface engineering and materials for sliding and rolling bearings Emphasizes the scientific foundation of tribology Discusses the treatment of wear in the design process Uses SI units throughout and refers to U.S., U.K., and other European standards and material designations
Download or read book Tribology written by Jürgen Gegner and published by BoD – Books on Demand. This book was released on 2013-05-22 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the subject of tribology comprises lubrication, friction and wear of contact components highly relevant to practical applications, it challenges scientists from chemistry, physics and materials engineering around the world on todays sophisticated experimental and theoretical foundation to complex interdisciplinary research. Recent results and developments are preferably presented and evaluated in the context of established knowledge. Consisting of eleven chapters divided into the four parts of Lubrication and Properties of Lubricants, Boundary Lubrication Applications, Testing and Modeling, and Sustainability of Tribosystems, this textbook therefore merges basic concepts with new findings and approaches. Tribology Fundamentals and Advancements, supported by competent authors, aims to convey current research trends in the light of the state of the art to students, scientists and practitioners and help them solve their problems.
Download or read book Tribology and Dynamics of Engine and Powertrain written by Homer Rahnejat and published by Elsevier. This book was released on 2010-09-30 with total page 1059 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology, the science of friction, wear and lubrication, is one of the cornerstones of engineering's quest for efficiency and conservation of resources. Tribology and dynamics of engine and powertrain: fundamentals, applications and future trends provides an authoritative and comprehensive overview of the disciplines of dynamics and tribology using a multi-physics and multi-scale approach to improve automotive engine and powertrain technology.Part one reviews the fundamental aspects of the physics of motion, particularly the multi-body approach to multi-physics, multi-scale problem solving in tribology. Fundamental issues in tribology are then described in detail,from surface phenomena in thin-film tribology, to impact dynamics, fluid film and elastohydrodynamic lubrication means of measurement and evaluation. These chapters provide an understanding of the theoretical foundation for Part II which includes many aspects of the physics of motion at a multitude of interaction scales from large displacement dynamics to noise and vibration tribology, all of which affect engines and powertrains. Many chapters are contributed by well-established practitioners disseminating their valuable knowledge and expertise on specific engine and powertrain sub-systems. These include overviews of engine and powertrain issues, engine bearings, piston systems, valve trains, transmission and many aspects of drivetrain systems. The final part of the book considers the emerging areas of microengines and gears as well as nano-scale surface engineering.With its distinguished editor and international team of academic and industry contributors, Tribology and dynamics of engine and powertrain is a standard work for automotive engineers and all those researching NVH and tribological issues in engineering. - Reviews fundamental aspects of physics in motion, specifically the multi-body approach to multi physics - Describes essential issues in tribology from surface phenomena in thin film tribology to impact dynamics - Examines specific engine and powertrain sub-systems including engine bearings, piston systems and value trains
Download or read book Engineering Tribology written by Gwidon Stachowiak and published by Elsevier. This book was released on 2011-03-31 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: As with the previous edition, the third edition of Engineering Tribology provides a thorough understanding of friction and wear using technologies such as lubrication and special materials. Tribology is a complex topic with its own terminology and specialized concepts, yet is vitally important throughout all engineering disciplines, including mechanical design, aerodynamics, fluid dynamics and biomedical engineering. This edition includes updated material on the hydrodynamic aspects of tribology as well as new advances in the field of biotribology, with a focus throughout on the engineering applications of tribology.This book offers an extensive range if illustrations which communicate the basic concepts of tribology in engineering better than text alone. All chapters include an extensive list of references and citations to facilitate further in-depth research and thorough navigation through particular subjects covered in each chapter. - Includes newly devised end-of-chapter problems - Provides a comprehensive overview of the mechanisms of wear, lubrication and friction in an accessible manner designed to aid non-specialists - Gives a reader-friendly approach to the subject using a graphic illustrative method to break down the typically complex problems associated with tribology
Download or read book Tribology for Engineers written by J. Paulo Davim and published by Elsevier. This book was released on 2011-01-24 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology for engineers discusses recent research and applications of principles of friction, wear and lubrication, and provides the fundamentals and advances in tribology for modern industry. The book examines tribology with special emphasis on surface topography, wear of materials and lubrication, and includes dedicated coverage on the fundamentals of micro and nanotribology. The book serves as a valuable reference for academics, tribology and materials researchers, mechanical, physics and materials engineers and professionals in related industries with tribology. - Edited and written by highly knowledgeable and well-respected researchers in the field - Examines recent research and applications of friction, wear and lubrication - Highlights advances and future trends in the industry
Download or read book Introduction to Tribology of Bearings written by B C Majumdar and published by S. Chand Publishing. This book was released on 2008 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the basic principles and equations governing Hydrodynamic, Hydrostatic, Elastohydrodynamic and Gas Lubrication. The author has made an effort to explain the theory and present an exposition of the fundamentals of fluid film bearings, rolling element bearings, friction and wear of metals.
Download or read book Tribology of Diamond like Carbon Films written by Christophe Donnet and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.
Download or read book Fundamentals of Tribology written by Nam P. Suh and published by MIT Press (MA). This book was released on 1980 with total page 1240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an overview of tribology and a forum for diverse views on this crucial subject.
Download or read book Hydrodynamic Lubrication written by J. Frene and published by Elsevier. This book was released on 1997-11-10 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamic Lubrication is the culmination of over 20 years close, collaborative work by the five authors and discusses the practical use of the formalization of low pressure lubrication. The work concentrates on the developments to journal and thrust bearings and includes subjects such as: • the dynamic behaviour of plain and tilting-pads • the thermal aspects • the positive and negative effects of non-cyclindricity and shape defects resulting from manufacturing or operation • the effects of inertia • the appearance of Taylor's vortices and of turbulence and their repercussions. The book contains an abundance of test results objectively compared with theoretical conclusions and a chapter on "technical considerations" to ensure that draft mechanisms will work satisfactorily under the imposed conditions. Hydrodynamic Lubrication is an essential reference book for future and practising engineers who want to put hydrodynamic and hydrostatic journal bearings and thrust bearings into operation under conditions of total safety.
Download or read book Fundamentals of Friction written by I.L. Singer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Friction, unlike many books on tribology, is devoted to one specific topic: friction. After introductory chapters on scientific and engineering perspectives, the next section contains the necessary background within the areas of contact mechanics, surfaces and adhesion. Then on to fracture, deformation and interface shear, from the macroscopic behavior of materials in frictional contact to microscopic models of uniform and granular interfaces. Lubrication by solids, liquids and gases is presented next, from classical flow properties to the reorganization of monolayers of molecules under normal and shear stresses. A section on new approaches at the nano- and atomic scales covers the physics and chemistry of interfaces, an array of visually exciting simulations, using molecular dynamics, of solids and liquids in sliding contact, and related AFM/STM studies. Following a section on machines and measurements, the final chapter discusses future issues in friction.
