Download or read book Fundamentals of Tool Engineering Design written by S. K. Basu and published by . This book was released on 1979 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Tool Design Fifth Edition written by Society of Manufacturing Engineers and published by Society of Manufacturing Engineers. This book was released on 2003-12-08 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The creation of a Fifth Edition is proof of the continuing vitality of the book's contents, including: tool design and materials; jigs and fixtures; workholding principles; die manipulation; inspection, gaging, and tolerances; computer hardware and software and their applications; joining processes, and pressworking tool design. To stay abreast of the newer developments in design and manufacturing, every effort has been made to include those technologies that are currently finding applications in tool engineering. For example, sections on rapid prototyping, hydroforming, and simulation have been added or enhanced. The basic principles and methods discussed in Fundamentals of Tool Design can be used by both students and professionals for designing efficient tools.
Download or read book Fundamentals of Tool Design Sixth Edition written by John G. Nee and published by Society of Manufacturing Engineers. This book was released on 2010 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: For over 40 years, students, designers, and manufacturing practitioners have used the Fundamentals of Tool Design to gain an in-depth understanding of all the factors that impact tool success. Fully illustrated, readers will find practical design examples, cost analysis calculations, process data, operating parameters, and tips and techniques--all of the concrete knowledge needed to spark innovation and resolve complex tooling challenges.
Download or read book Fundamentals of Tool Design written by David T. Reid and published by Conran Octopus. This book was released on 1991 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Tool Design written by American Society of Tool and Manufacturing Engineers and published by . This book was released on 1962 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Tools Handbook written by Prakash Hiralal Joshi and published by McGraw Hill Professional. This book was released on 2007-05-22 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acquire the Skills, Tools, and Techniques Needed to Ensure High Quality and Precision in the Design of Machined Parts! Designed for quick access on the job, Machine Tools Handbook explains in detail how to carry out basic and advanced machine tool operations and functions, providing a wealth of machine tool exercises to test and improve the performance of machinists. The tables, graphs, and formulas packed into this essential reference makes it a must-have for every machine and manufacturing workshop. Machine Tools Handbook features: Expert instructions on performing basic and advanced machine tool operations and functions Comparative tables for machine tool drives Complete guidelines for designing simple circuits for electrical automation Detailed graphs for gear design Solved examples that illustrate and prove formulas Inside This Hands-On Machine Tool Guide • Machine Tool Drives and Mechanisms • Rectilinear Drives • Drive Transmission and Manipulation • Machine Tool Elements • Dynamics of Machine Tools • Machine Tool Operation • Tool Engineering • Exercises
Download or read book Roll Form Tool Design written by William Alvarez and published by . This book was released on 2006 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal method of learning either design skills or machine operator skills of roll form tooling and its design has been on-the-job training. As the only book of its kind available on the subject, this insightful and handy reference acts as a supplement to on-the-job-training by presenting the fundamentals of roll tool design through theory and illustrative examples which include detail of the design calculations. Additionally, it identifies design decisions that are judgment calls and have no correct answers in design examples that depict certain ideas and conceptshelping users develop a feel for the process. It is sure to be useful as a teaching aid for setup personnel and roll form machine operators, as well as a basic reference for tool design personnel.
Download or read book Fundamentals of Tool Design written by American Society of Tool and Manufacturing Engineers and published by Prentice Hall. This book was released on 1962 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes material on numerical control; the computer in tool design, etc.
Download or read book Engineering for Industrial Designers and Inventors written by Thomas Ask and published by "O'Reilly Media, Inc.". This book was released on 2016-05-04 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you have designs for wonderful machines in mind, but aren’t sure how to turn your ideas into real, engineered products that can be manufactured, marketed, and used, this book is for you. Engineering professor and veteran maker Tom Ask helps you integrate mechanical engineering concepts into your creative design process by presenting them in a rigorous but largely nonmathematical format. Through mind stories and images, this book provides you with a firm grounding in material mechanics, thermodynamics, fluid dynamics, and heat transfer. Students, product and mechanical designers, and inventive makers will also explore nontechnical topics such as aesthetics, ethnography, and branding that influence product appeal and user preference. Learn the importance of designing functional products that also appeal to users in subtle ways Explore the role of aesthetics, ethnography, brand management, and material culture in product design Dive into traditional mechanical engineering disciplines related to the behavior of solids, liquids, and gases Understand the human factors of design, such as ergonomics, kinesiology, anthropometry, and biomimicry Get an overview of available mechanical systems and components for creating your product
Download or read book Progressive Dies written by and published by Society of Manufacturing Engineers. This book was released on 1994 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hundreds of examples and guidelines detail how to improve your current die designs, or utilize new progressive designs that maximize efficiency while minimizing cost. Examples of the topics covered in the book's nineteen chapters include: punches and dies, stock guides and pilots, strippers, press selection, binding, blank development, design of strips and stampings, carbide dies, die material selection, design practices, EDM, mathematics and angle calculations, lubrication, sensors and die protection, and more.
Download or read book Fundamentals of Metal Machining and Machine Tools written by Winston A. Knight and published by CRC Press. This book was released on 2019-08-08 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting changes in machining practice, Fundamentals of Machining and Machine Tools, Third Edition emphasizes the economics of machining processes and design for machining. This edition includes new material on super-hard cutting tool materials, tool geometries, and surface coatings. It describes recent developments in high-speed machining, hard machining, and cutting fluid applications such as dry and minimum-quantity lubrication machining. It also presents analytical methods that outline the limitations of various approaches. This edition features expanded information on tool geometries for chip breaking and control as well as improvements in cost modeling of machining processes.
Download or read book Geometry of Single point Turning Tools and Drills written by Viktor P. Astakhov and published by Springer Science & Business Media. This book was released on 2010-07-29 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometry of Single-Point Turning Tools and Drills outlines clear objectives of cutting tool geometry selection and optimization, using multiple examples to provide a thorough explanation. It addresses several urgent problems that many present-day tool manufacturers, tool application specialists, and tool users, are facing. It is both a practical guide, offering useful, practical suggestions for the solution of common problems, and a useful reference on the most important aspects of cutting tool design, application, and troubleshooting practices. Covering emerging trends in cutting tool design, cutting tool geometry, machining regimes, and optimization of machining operations, Geometry of Single-Point Turning Tools and Drills is an indispensable source of information for tool designers, manufacturing engineers, research workers, and students.
Download or read book Tool Engineering written by Albert A. Dowd and published by Forgotten Books. This book was released on 2015-06-26 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Tool Engineering: Jigs and Fixtures The aim and purpose of this book is to furnish information with respect to the science of tool engineering. Nothing has previously been published on the subject except in short articles dealing with specific examples of jigs and fixtures. Information of value regarding principles of design in connection with production tools is sadly lacking and mechanical literature contains only spasmodic efforts to remedy the deficiency. In order to cover the subject properly three volumes were planned, each of these being complete in itself. This volume, which is the first, deals with the design of jigs and fixtures. It covers the important points connected with the design, shows the reasons why certain methods are better than others, takes up principles and their application to design and gives many graphic examples which illustrate the use of the principles involved. An endeavor has been made to simplify the subject matter as far as possible and to treat it in a practical common sense manner which can be easily understood by the designer. A careful study of the illustrations and descriptive matter will enable a progressive man to understand both the theory and practice necessary for this line of work. The second volume takes up turret lathe and vertical boring mill tooling together with grinding fixtures. The third volume deals with punches, dies and gages. For a number of years the machines and tools used for production have been undergoing a process of evolution and although the development work has progressed rapidly, much still remains to be done. Present manufacturing methods are of the highest order and tooling for high production is of interest to all the mechanical fraternity. There are however, comparatively few men in this country who really know the science in all its fundamentals and for this reason the tooling in many factories is probably not over 50% efficient. A great many of those responsible for tooling are not well informed as to the fundamentals of design. Tools are worked out more or less by using ideas in vogue in the factory where the work is being done and the design is usually influenced by previous practice for work of the same character. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Tool Design written by Cyril Donaldson and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tool Engineering written by Albert Atkins Dowd and published by . This book was released on 1922 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Tool Design written by Nicholas Lisitsyn and published by . This book was released on 2000-04-01 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fundamental four-volume work was translated from the considerably revised second edition. It should be of great value to engineers engaged in the design, manufacture and maintenance of machine tool equipment. It can also be used to advantage by the students of engineering institutes majoring in Process Engineering, Metal-Cutting Machine Tools or Cutting Tool Design.The first volume deals with the basic machine tools and special machine tools used in cutting tool production. The classification, type and size range, and designation of machine tools, employed in Soviet practice, are given in detail, together with the types of motion found in machine tools. Metal-cutting lathes, turret lathes, vertical boring machines, automatic and semiautomatic lathes, milling machines and many other types of machine tools are described. Special attention has been given to machine tools designed for the production of cutting tools. These include general and single-purpose semiautomatic precision thread-grinding machines, automatic and semiautomatic tracer-controlled lathes with hydraulic controls, jig boring machines and specialized machine tools, as well as automatic transfer machines for cutting tool production.Volume two contains Parts Three and Four. Part Three deals with the kinematics of machine tools. This branch of machine tool design has been strictly systematized by the author and is set forth with exceptional clarity. The kinematic structures of a great many different types of machine tools, including the most complex gear-cutting machines, are analyzed by methods developed in the text which take into consideration the interrelation between the workpiece to be produced in the given machine tool. Part Four takes up hydraulic drives of machine tools. It contains all the theoretical and practical data required in the application of fluid power and control systems to machine tools.Volume Three contains Part Five and this deals with machine tool design proper. It is a comprehensive scientific treatment of the subject and is a revised and complemented version of a previous Russian edition which has become a reliable reference book for all Soviet machine tool engineers and has been translated into French. Such questions as performance criteria, basic design data, principal specifications and the development of the kinematic scheme of a new machine tool are dealt with in great detail. Design recommendations are given as well as the necessary calculation data for the basic elements of machine tools - speed and feed gearboxes, stepless drives, rapid traverse mechanisms, spindles and spindle bearings, mechanisms for rectilinear motion, small displacement and periodic motion, reversing devices, beds columns, tables and other housing-type components, slideways and antifriction ways.The fourth and final volume covers Automatic Machine Tools and Transfer Machines, and Machine Tool Testing and Research, Parts Six and Seven of the complete work. Part Six deals with the fundamental principles of machine tool automation, the various systems of numerical programme control that have found extensive application in modern machine tool design in the USSR and other countries. Much space has been given to automatic transfer machines, including in-line, rotary, and other types, their layout, features, design procedures, structure, and output.Current methods of testing and investigating the geometrical, kinematic, dynamic, and operational characteristics of machine tools are considered in Part Seven. Methods of testing the quality characteristics, of determining the corresponding criteria (indices), and of using contemporary apparatus for this purpose are dealt with. --This text refers to the Paperback edition.
Download or read book Product Development written by Christopher A. Mattson and published by Springer. This book was released on 2020-12-25 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the evolution of products from the beginning idea through mass-production. Rather than prescribing a one-size-fits-all process, the authors explain the theory behind product development and challenge readers to develop their own customized development process uniquely suited for their individual situation. In addition to theory, the book provides development case studies, exercises and self-evaluation criteria at the end of each chapter, and a product development reference that introduces a wide variety of design tools and methods. Class-tested for three consecutive years by hundreds of students in four different courses, the book is an ideal text for senior design classes in mechanical engineering and related disciplines as well as a reference for practicing engineers/product designers.
