Download or read book Fundamentals of microscale bubbles in process engineering Band 9 written by Simon Matthes and published by Cuvillier Verlag. This book was released on 2021-10-25 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase contact apparatuses are widely used in the chemical and biocatalytic process industry in which a gaseous reactant has to be supplied. The achievement of high mass transfer rates with regard to process efficiency is mostly challenging. In this work a novel aeration technique based on fine bubbles with diameters smaller 100 µm is experimentally analyzed, providing large interfacial areas for the mass transfer process. The experiments show the benefit of using fine bubbles by reaching significantly higher mass transfer rates compared to conventional aeration. Especially stirred tank reactors prove to be most suitable for fine bubble aeration. Finally, models are developed, describing the mass transfer characteristics at microscales.

Download or read book Micro and Nanobubbles written by Hideki Tsuge and published by CRC Press. This book was released on 2014-08-04 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbubbles and nanobubbles have several characteristics that are comparable with millimeter- and centimeter-sized bubbles. These characteristics are their small size, which results in large surface area and high bioactivity, low rising velocity, decreased friction drag, high internal pressure, large gas dissolution capacity, negatively charged surface, and ability to be crushed and form free radicals. Microbubbles and nanobubbles have found applications in a variety of fields such as engineering, agriculture, environment, food, and medicine. Microbubbles have been successfully used in aquacultures of oysters in Hiroshima, scallops in Hokkaido, and pearls in Mie Prefecture, Japan. This field has shown a strong potential for growth. This book comprehensively discusses microbubbles and nanobubbles and their application in aquaculture, environment, engineering, medicine, stock raising, agriculture, and marine industry. It presents their potential as a new technology that can be utilized globally.

Download or read book Process Intensification written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-06-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. - No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide - Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis - World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology

Download or read book Fabrication Engineering at the Micro and Nanoscale written by Stephen A. Campbell and published by OUP USA. This book was released on 2008-01-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for advanced undergraduate or first-year graduate courses in semiconductor or microelectronic fabrication, the third edition of Fabrication Engineering at the Micro and Nanoscale provides a thorough and accessible introduction to all fields of micro and nano fabrication.

Download or read book Fundamentals of Geomorphology written by Richard John Huggett and published by Routledge. This book was released on 2011-03-15 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively revised, restructured, and updated edition continues to present an engaging and comprehensive introduction to the subject, exploring the world’s landforms from a broad systems perspective. It covers the basics of Earth surface forms and processes, while reflecting on the latest developments in the field. Fundamentals of Geomorphology begins with a consideration of the nature of geomorphology, process and form, history, and geomorphic systems, and moves on to discuss: structure: structural landforms associated with plate tectonics and those associated with volcanoes, impact craters, and folds, faults, and joints process and form: landforms resulting from, or influenced by, the exogenic agencies of weathering, running water, flowing ice and meltwater, ground ice and frost, the wind, and the sea; landforms developed on limestone; and landscape evolution, a discussion of ancient landforms, including palaeosurfaces, stagnant landscape features, and evolutionary aspects of landscape change. This third edition has been fully updated to include a clearer initial explanation of the nature of geomorphology, of land surface process and form, and of land-surface change over different timescales. The text has been restructured to incorporate information on geomorphic materials and processes at more suitable points in the book. Finally, historical geomorphology has been integrated throughout the text to reflect the importance of history in all aspects of geomorphology. Fundamentals of Geomorphology provides a stimulating and innovative perspective on the key topics and debates within the field of geomorphology. Written in an accessible and lively manner, it includes guides to further reading, chapter summaries, and an extensive glossary of key terms. The book is also illustrated throughout with over 200 informative diagrams and attractive photographs, all in colour.

Download or read book Fundamentals and Applications of Microfluidics written by Nam-Trung Nguyen and published by Integrated Microsystems. This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its Third Edition, the Artech House bestseller, Fundamentals and Applications of Microfluidics, provides engineers and students with the most complete and current coverage of this cutting-edge field. This revised and expanded edition provides updated discussions throughout and features critical new material on microfluidic power sources, sensors, cell separation, organ-on-chip and drug delivery systems, 3D culture devices, droplet-based chemical synthesis, paper-based microfluidics for point-of-care, ion concentration polarization, micro-optofluidics and micro-magnetofluidics. The book shows how to take advantage of the performance benefits of microfluidics and serves as an instant reference for state-of-the-art microfluidics technology and applications. Readers find discussions on a wide range of applications, including fluid control devices, gas and fluid measurement devices, medical testing equipment, and implantable drug pumps. Professionals get practical guidance in choosing the best fabrication and enabling technology for a specific microfluidic application, and learn how to design a microfluidic device. Moreover, engineers get simple calculations, ready-to-use data tables, and rules of thumb that help them make design decisions and determine device characteristics quickly. addressed at the design stage to reduce the risk of failures in the field is presented. The book includes technical details of all state-of-the-art Li-on energy storage subsystems and their requirements, and provides a system designer a single resource detailing all of the common issues navigated when using Li-ion batteries to reduce the risk of field failures. The book details the various industry standards that are applicable to the subsystems of Li-ion energy storage systems and how the requirements of these standards may impact the design of their system. Checklists are included to help readers evaluate their own battery system designs and identify gaps in the designs that increase the risk of field failures. The book is packed with numerous examples of issues that have caused field failures and how a proper design/assembly process could have reduced the risk of these failures.

Download or read book Self healing Materials written by Swapan Kumar Ghosh and published by John Wiley & Sons. This book was released on 2009-08-04 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers self-healing concepts for all important material classes and their applications: polymers, ceramics, non-metallic and metallic coatings, alloys, nanocomposites, concretes and cements, as well as ionomers. Beginning with the inspiration from biological self-healing, its mimickry and conceptual transfer into approaches for the self-repair of artificially created materials, this book explains the strategies and mechanisms for the readers' basic understanding, then covers the different material classes and suitable self-healing concepts, giving examples for their application in practical situations. As the first book in this swiftly growing research field, it is of great interest to readers from many scientific and engineering disciplines, such as physics and chemistry, civil, architectural, mechanical, electronics and aerospace engineering.

Download or read book Handbook of Surface Plasmon Resonance written by Richard B. M. Schasfoort and published by Royal Society of Chemistry. This book was released on 2017-05-30 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface plasmon resonance (SPR) plays a dominant role in real-time interaction sensing of biomolecular binding events, this book provides a total system description including optics, fluidics and sensor surfaces for a wide researcher audience.

Download or read book Photonic Crystals written by John D. Joannopoulos and published by Princeton University Press. This book was released on 2011-10-30 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since it was first published in 1995, Photonic Crystals has remained the definitive text for both undergraduates and researchers on photonic band-gap materials and their use in controlling the propagation of light. This newly expanded and revised edition covers the latest developments in the field, providing the most up-to-date, concise, and comprehensive book available on these novel materials and their applications. Starting from Maxwell's equations and Fourier analysis, the authors develop the theoretical tools of photonics using principles of linear algebra and symmetry, emphasizing analogies with traditional solid-state physics and quantum theory. They then investigate the unique phenomena that take place within photonic crystals at defect sites and surfaces, from one to three dimensions. This new edition includes entirely new chapters describing important hybrid structures that use band gaps or periodicity only in some directions: periodic waveguides, photonic-crystal slabs, and photonic-crystal fibers. The authors demonstrate how the capabilities of photonic crystals to localize light can be put to work in devices such as filters and splitters. A new appendix provides an overview of computational methods for electromagnetism. Existing chapters have been considerably updated and expanded to include many new three-dimensional photonic crystals, an extensive tutorial on device design using temporal coupled-mode theory, discussions of diffraction and refraction at crystal interfaces, and more. Richly illustrated and accessibly written, Photonic Crystals is an indispensable resource for students and researchers. Extensively revised and expanded Features improved graphics throughout Includes new chapters on photonic-crystal fibers and combined index-and band-gap-guiding Provides an introduction to coupled-mode theory as a powerful tool for device design Covers many new topics, including omnidirectional reflection, anomalous refraction and diffraction, computational photonics, and much more.

Download or read book Design of Experiments in Chemical Engineering written by Zivorad R. Lazic and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: While existing books related to DOE are focused either on process or mixture factors or analyze specific tools from DOE science, this text is structured both horizontally and vertically, covering the three most common objectives of any experimental research: * screening designs * mathematical modeling, and * optimization. Written in a simple and lively manner and backed by current chemical product studies from all around the world, the book elucidates basic concepts of statistical methods, experiment design and optimization techniques as applied to chemistry and chemical engineering. Throughout, the focus is on unifying the theory and methodology of optimization with well-known statistical and experimental methods. The author draws on his own experience in research and development, resulting in a work that will assist students, scientists and engineers in using the concepts covered here in seeking optimum conditions for a chemical system or process. With 441 tables, 250 diagrams, as well as 200 examples drawn from current chemical product studies, this is an invaluable and convenient source of information for all those involved in process optimization.

Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.

Download or read book Handbook of Heat Transfer written by Warren M. Rohsenow and published by McGraw-Hill Companies. This book was released on 1973 with total page 1552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microscale Surface Tension and Its Applications written by Pierre Lambert and published by MDPI. This book was released on 2019-10-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to: Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems.

Download or read book Speculative Everything written by Anthony Dunne and published by MIT Press. This book was released on 2013-12-06 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to use design as a tool to create not only things but ideas, to speculate about possible futures. Today designers often focus on making technology easy to use, sexy, and consumable. In Speculative Everything, Anthony Dunne and Fiona Raby propose a kind of design that is used as a tool to create not only things but ideas. For them, design is a means of speculating about how things could be—to imagine possible futures. This is not the usual sort of predicting or forecasting, spotting trends and extrapolating; these kinds of predictions have been proven wrong, again and again. Instead, Dunne and Raby pose “what if” questions that are intended to open debate and discussion about the kind of future people want (and do not want). Speculative Everything offers a tour through an emerging cultural landscape of design ideas, ideals, and approaches. Dunne and Raby cite examples from their own design and teaching and from other projects from fine art, design, architecture, cinema, and photography. They also draw on futurology, political theory, the philosophy of technology, and literary fiction. They show us, for example, ideas for a solar kitchen restaurant; a flypaper robotic clock; a menstruation machine; a cloud-seeding truck; a phantom-limb sensation recorder; and devices for food foraging that use the tools of synthetic biology. Dunne and Raby contend that if we speculate more—about everything—reality will become more malleable. The ideas freed by speculative design increase the odds of achieving desirable futures.

Download or read book Modern Sample Preparation for Chromatography written by Serban C. Moldoveanu and published by Elsevier. This book was released on 2021-02-24 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Sample Preparation for Chromatography, Second Edition explains the principles of sample preparation for chromatographic analysis. A variety of procedures are applied to make real-world samples amenable for chromatographic analysis and to improve results. This book's authors discuss each procedure's advantages, disadvantages and their applicability to different types of samples, along with their fit for different types of chromatographic analysis. The book contains numerous literature references and examples of sample preparation for different matrices and new sections on green approaches in sample preparation, progress in automation of sample preparation, non-conventional solvents for LLE (ionic liquids, deep eutectic mixtures, and others), and more. - Presents numerous techniques applied for sample preparation for chromatographic analysis - Provides an up-to-date source of information regarding the progress made in sample preparation for chromatography - Describes examples for specific types of matrices, providing a guide for choosing the appropriate sample preparation method for a given analysis

Download or read book Laser Precision Microfabrication written by Koji Sugioka and published by Springer. This book was released on 2010-08-13 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Miniaturization and high precision are rapidly becoming a requirement for many industrial processes and products. As a result, there is greater interest in the use of laser microfabrication technology to achieve these goals. This book composed of 16 chapters covers all the topics of laser precision processing from fundamental aspects to industrial applications to both inorganic and biological materials. It reviews the sate of the art of research and technological development in the area of laser processing.

Download or read book Design and Engineering of Microreactor and Smart Scaled Flow Processes written by Volker Hessel and published by MDPI. This book was released on 2018-10-08 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Design and Engineering of Microreactor and Smart-Scaled Flow Processes" that was published in Processes