Download or read book Fundamentals of Fuel Injection and Emission in Two stroke Engines written by Wadysaw Mitianiec and published by Nova Science Publishers. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main goal of the book is the presentation of the last theoretical and experimental works concerning fuel injection systems, mainly in small power two-stroke engines as well as in marine engines. This book includes thirteen chapters devoted to the processes of fuel injection and the combustion that takes place in a stratified charge within the cylinders of two-stroke engines. In the first two chapters, the division into different injection systems in two-stroke engines and each injection system is briefly described. Various theoretical and practical solutions of fueling system designs are described. In Chapter Three, mathematical models, the spatial movement of gas in the cylinder and the combustion chamber are introduced, taking into account the turbulence of the charge. Chapter Four relates to the behavior of fuel injected into the gaseous medium, including evaporation processes, disintegration and processes occurring while the fuel drops connect with the wall. The next section describes the zero-dimensional model of fuel injection in two-stroke engines along with examples of numerical calculations. The sixth chapter is devoted to CFD multi-dimensional models of movement and evaporation of the fuel in a closed gaseous medium, occurring also in other engine types. Chapter Seven describes a two-zone model of the combustion process and the effect of the geometry of the combustion chamber on the flame propagation with a simplified verification model of combustion. Chapter Eight compares the propagation phase of gas and liquid fuels concerning direct fuel injection as well as the direct fuel injection from the cylinder head and the thermodynamic parameters of the charge. The formation of the components during the combustion process in the direct fuel injection two-stroke engine was obtained by numerical calculations and results are discussed in Chapter Nine. Chapter Ten describes the parameters of the two-stroke engine with a direct fuel injection carried out at the Cracow University of Technology. Additionally, the chapter presents CFD simulations of fuel propagation and combustion processes, taking into account the formation of toxic components and exhaust gas emission. The processes of two direct rich mixture injection systems FAST and RMIS developed in CUT are presented in Chapter Eleven. Miscellaneous problems of direct fuel injection, such as characteristics of fuel injectors, problems of direct gaseous fuel injection, and the application of fuelling systems in outboard engines and snowmobile vehicles are presented in Chapter Twelve. A comparison of working parameters in two- and four stroke engines is also mapped out. The last chapters contain the final conclusions and remarks concerning fuel injection and emission of exhaust gases in small two-stroke engines. This book is a comprehensive monograph on fuel injection. The author presents a series of theoretical and design information from his own experience and on the basis of the works of other authors. The main text intends to direct fuel injection with respect to gas motion in the combustion chamber and influence the injection parameters for exhaust emission. The book presents its own theoretical work and experimental tests concerning a two-stroke gasoline engine with electrically controlled direct fuel injection. The book describes the processes of a general nature also occurring in other types of engines and presents a comparison of different injection systems on working parameters and gas emission. The book contains 294 images, 290 equations and 16 tables obtained from the CFD simulation and experimental works.
Download or read book Fundamentals of Fuel Injection and Emission in Two stroke Engines written by Władysław Mitianiec and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emissions from Two Stroke Engines written by Marco Nuti and published by SAE International. This book was released on 1998-10-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In the design of new CI engines, it is of paramount importance to reduce the pollutants and fuel consumption," writes author Marco Nuti. In this, the first book devoted entirely to exhaust emissions from two-stroke engines, Nuti examines the technical design issues that will determine how long the two-stroke engine survives into the twenty-first century. Dr. Nuti, director of Technical Innovation at Piaggio, thoroughly explores pollutant formation and control from unburned hydrocarbon emissions, carbon monoxide emissions, catalytic aftertreatment, and secondary air addition.
Download or read book FUNDAMENTALS OF INTERNAL COMBUSTION ENGINES written by H. N. GUPTA and published by PHI Learning Pvt. Ltd.. This book was released on 2012-12-10 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive introduction to the basics of Internal Combustion Engines, this book is suitable for: Undergraduate-level courses in mechanical engineering, aeronautical engineering, and automobile engineering. Postgraduate-level courses (Thermal Engineering) in mechanical engineering. A.M.I.E. (Section B) courses in mechanical engineering. Competitive examinations, such as Civil Services, Engineering Services, GATE, etc. In addition, the book can be used for refresher courses for professionals in auto-mobile industries. Coverage Includes Analysis of processes (thermodynamic, combustion, fluid flow, heat transfer, friction and lubrication) relevant to design, performance, efficiency, fuel and emission requirements of internal combustion engines. Special topics such as reactive systems, unburned and burned mixture charts, fuel-line hydraulics, side thrust on the cylinder walls, etc. Modern developments such as electronic fuel injection systems, electronic ignition systems, electronic indicators, exhaust emission requirements, etc. The Second Edition includes new sections on geometry of reciprocating engine, engine performance parameters, alternative fuels for IC engines, Carnot cycle, Stirling cycle, Ericsson cycle, Lenoir cycle, Miller cycle, crankcase ventilation, supercharger controls and homogeneous charge compression ignition engines. Besides, air-standard cycles, latest advances in fuel-injection system in SI engine and gasoline direct injection are discussed in detail. New problems and examples have been added to several chapters. Key Features Explains basic principles and applications in a clear, concise, and easy-to-read manner Richly illustrated to promote a fuller understanding of the subject SI units are used throughout Example problems illustrate applications of theory End-of-chapter review questions and problems help students reinforce and apply key concepts Provides answers to all numerical problems
Download or read book The Basic Design of Two Stroke Engines written by Gordon P Blair and published by SAE International. This book was released on 1990-01-01 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informative publication is a hands-on reference source for the design of two-stroke engines. The state-of-the-art is presented in such design areas as unsteady gas dynamics, scavenging, combustion, emissions and silencing. In addition, this comprehensive publication features a computer program appendix of 28 design programs, allowing the reader to recreate the applications described in the book. The Basic Design of Two-Stroke Engines offers practical assistance in improving both the mechanical and performance design of this intriguing engine. Organized into eight information-packed chapters, contents of this publication include: Introduction to the Two-Stroke Engine Gas Flow Through Two-Stroke Engines Scavenging the Two-Stroke Engine Combustion in Two-Stroke Engines Computer Modelling of Engines Empirical Assistance for the Designer Reduction of Fuel Consumption and Exhaust Emissions Reduction of Noise Emission from Two-Stroke Engines
Download or read book Two Stroke Cycle Engine written by JohnB. Heywood and published by Routledge. This book was released on 2017-11-01 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the two-stroke cycle internal combustion engine, used in compact, lightweight form in everything from motorcycles to chainsaws to outboard motors, and in large sizes for marine propulsion and power generation. It first provides an overview of the principles, characteristics, applications, and history of the two-stroke cycle engine, followed by descriptions and evaluations of various types of models that have been developed to predict aspects of two-stroke engine operation.
Download or read book Two stroke Engines Small Engines and Emissions Reductio N written by and published by . This book was released on 1991 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Simulation of Two Stroke Engines written by Gordon Blair and published by SAE International. This book was released on 1996-02-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Simulation of Two-Stroke Engines is a unique hands-on information source. The author, having designed and developed many two-stroke engines, offers practical and empirical assistance to the engine designer on many topics ranging from porting layout, to combustion chamber profile, to tuned exhaust pipes. The information presented extends from the most fundamental theory to pragmatic design, development, and experimental testing issues. Chapters cover: Introduction to the Two-Stroke Engine Combustion in Two-Stroke Engines Computer Modeling of Engines Reduction of Fuel Consumption and Exhaust Emissions Reduction of Noise Emission from Two-Stroke Engines and more
Download or read book Two stroke Direct Injection Emissions and Efficiency written by Marc L. Syvertsen and published by . This book was released on 1996 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Study of Exhaust Emission Control for Direct Fuel Injection Two stroke Engine written by and published by . This book was released on 1999 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Basic Design of Two Stroke Engines written by Gordon P Blair and published by SAE International. This book was released on 1990-01-01 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informative publication is a hands-on reference source for the design of two-stroke engines. The state-of-the-art is presented in such design areas as unsteady gas dynamics, scavenging, combustion, emissions and silencing. In addition, this comprehensive publication features a computer program appendix of 28 design programs, allowing the reader to recreate the applications described in the book. The Basic Design of Two-Stroke Engines offers practical assistance in improving both the mechanical and performance design of this intriguing engine. Organized into eight information-packed chapters, contents of this publication include: Introduction to the Two-Stroke Engine Gas Flow Through Two-Stroke Engines Scavenging the Two-Stroke Engine Combustion in Two-Stroke Engines Computer Modelling of Engines Empirical Assistance for the Designer Reduction of Fuel Consumption and Exhaust Emissions Reduction of Noise Emission from Two-Stroke Engines
Download or read book New Generation of Two St written by Pierre Duret and published by Editions OPHRYS. This book was released on with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion and Emissions Potential in a Direct injection Two stroke Engine written by Brian McGuire and published by . This book was released on 2000 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effects of Spray Characteristics on Combustion and Emission Performance of a Two stroke Direct injection Engine written by Mark Casarella and published by . This book was released on 1998 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Two Stroke Cycle Engine written by JohnB. Heywood and published by Routledge. This book was released on 2017-11-01 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the two-stroke cycle internal combustion engine, used in compact, lightweight form in everything from motorcycles to chainsaws to outboard motors, and in large sizes for marine propulsion and power generation. It first provides an overview of the principles, characteristics, applications, and history of the two-stroke cycle engine, followed by descriptions and evaluations of various types of models that have been developed to predict aspects of two-stroke engine operation.
Download or read book Fundamentals of Automotive and Engine Technology written by Konrad Reif and published by Springer. This book was released on 2014-06-16 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid drives and the operation of hybrid vehicles are characteristic of contemporary automotive technology. Together with the electronic driver assistant systems, hybrid technology is of the greatest importance and both cannot be ignored by today’s car drivers. This technical reference book provides the reader with a firsthand comprehensive description of significant components of automotive technology. All texts are complemented by numerous detailed illustrations.
Download or read book Internal Combustion Engine Fundamentals written by John B. Heywood and published by McGraw-Hill Education. This book was released on 1988 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, by a leading authority in the field, presents a fundamental and factual development of the science and engineering underlying the design of combustion engines and turbines. An extensive illustration program supports the concepts and theories discussed.