Download or read book Functions in the ship model written by Günther Slansky and published by Verlag für Technik und Handwerk. This book was released on with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Would you like to breathe a little more life into your model ships by adding special, supplementary, and special functions? With some basic knowledge of electrics and electromechanics, it is possible! Whether you are a beginner or an advanced modeller - draw from the author's more than 50 years of modelling experience. After an introduction to the basics of electrical engineering, Günther Slansky shows you detailed electromechanical solutions with many drawings and pictures, right up to the complete functional set-up - both for remote-controlled driving models and for the so-called stand-alone and showcase models. From the content: • Basics of electrical engineering • Commercially available electronic components • Electric motors, relays, and servos • Electric power from batteries and 230 V mains • General basic circuits • Lighting, motor interference suppression, polarity reversal • Limit switch control, rectification • Electronic single and dual-channel switches • Constructive solutions • Functions with rotary movements • Functions with longitudinal movements • Function programmes • Basic functions of drive systems • Moving figures • Moving equipment • Special functions • Literature recommendations • The strike price shown here is the lowest price of the last 30 days for this product.
Download or read book Functions in the Ship Model written by Günther Slansky and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Historic Ship Models written by Wolfram zu Mondfeld and published by Sterling Publishing Company, Inc.. This book was released on 2005-04 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States and Europe. Whether you're a beginner or an expert, and whether you have hours to spend on a project or years, you'll find money- and time-saving ideas on every page. Book jacket.
Download or read book Propulsion and steering in ship model written by Siegfried Frohn and published by Verlag für Technik und Handwerk. This book was released on with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Often it is the most trivial things, even for a tinkering professional, that cause even the most beautiful shipbuilding project to fail. What could be more obvious than to be able to recognize to be able to recognize, avoid and eliminate them right from the start. Tips and tricks from decades of experience in model building are provided here by Siegfried Frohn. You will not find these tricks in any building manual! All basic concepts are explained and conveyed in a clear manner. Not least by the numerous illustrations and photos even beginners can easily understand the interesting subject of ship model building. From the content: • Basic knowledge of ship model building • Construction description, construction plan and parts lists • Remote control and receiver system on/off switch, charging socket, antenna • Servos and steering gear • Causes for reception disturbances • Speed controller and motors • Installation of the motor • Direction of rotation of the motor • Motor interference suppression for model ship builders • The range of the remote-control system • The basic concepts of battery technology • Charging, charging time, maintenance and care • The right charger • Series and parallel connection of batteries • Rudder systems, single and multiple rudder operation, bow thrusters • Material, size, number of blades and direction of rotation of a propeller • Special functions such as loudspeakers and water pumps • Sources of errors and their elimination • Collection of formulas for beginners in ship model building
Download or read book Navy Board Ship Models written by Nick Ball and published by Pen and Sword. This book was released on 2018-07-30 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: A beautifully illustrated history of the early ship models of the Royal Navy that are prized today as works of art. From about the middle of the seventeenth century, the Royal Navy’s administrators began to commission models of their ships that were accurately detailed and, for the first time, systematically to scale. These developed a recognized style, which included features like the unplanked lower hull with a simplified pattern of framing that emphasized the shape of the underwater body. Exquisitely crafted, these were always rare and highly prized objects—indeed, Samuel Pepys expressed a profound desire to own one, and today they are widely regarded as the acme of the ship modeler’s art. Today, examples are the highlights of collections across the world, valued both as art objects and as potential historical evidence on matters of ship design. However, it was only recently that researchers began to investigate the circumstances of their construction, their function, and the identities of those who made them. This book, by two curators who have worked on the world’s largest collection of these models at the National Maritime Museum in Greenwich, England, summarizes the current state of knowledge, outlines important discoveries, and applies this newfound understanding to many of the finest models in the collection. As befits its subject, Navy Board Ship Models is visually striking, with numerous color photographs that make it as attractive as it is informative to anyone with an interest in modelmaking or historic ships.
Download or read book Rigging Period Ships Models written by Lennarth Petersson and published by Pen and Sword. This book was released on 2011-03-30 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully illustrated guide to rigging models of historic ships with confidence and accuracy, using a model of the eighteenth-century HMS Melampus. The rigging of period ship models is the ultimate challenge for any modeler. An eighteenth-century man-of-war boasted mile on mile of rigging, more than one thousand blocks, and acres of canvas. To reduce this in scale, and yet retain an accurate representation, is an awesome undertaking. In this classic work, Lennarth Peterson untangles the complexities of model rigging. Using some four hundred drawings, he shows how each separate item of rigging is fitted to the masts, yards, and sails. Each drawing deals with only one particular item so that it can be seen clearly in isolation. The lead of a particular halyard, the arrangement of a bracing line—these and every other detail are depicted with startling clarity. Based on the author’s research of numerous eighteenth-century models, each one with its contemporary rigging still extant, the information is both meticulous and accurate. The remarkable visual immediacy and clarity of this work makes it truly unique and essential for any period ship modeler. In addition, the book is a “must-have” reference work for all those involved in the rigging and repair of historic ships.
Download or read book The Impulse Response Function and Ship Motions written by W. E. Cummins and published by . This book was released on 1962 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a review of the deficiencies of the usual equations of motion for an oscillating ship, two new representations are given. One makes use of the impulse response function and depends only upon the system being linear. The response is given as a convolution integral over th past history of the exciting force with the impulse response funcion appearing as the kernel. The second representation is based upon a hydrodynamic study, and new forms for the equations of motion are exhibited. The equations resemble the usual equations, with the addition of convolution integrals over the past history of the velocity. However, the coefficients in these new equations are independent of frequency, as are the kernel functions in the convolution integrals. Both representations are quite general and apply to transient motions as well as periodic. The relations between the two representations are given. The treatment considers six degrees of freedom, with linear coupling between the various modes. (Author).
Download or read book Ship Model Building written by Gene Johnson and published by . This book was released on 1944 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Håndbog i bygning af modelskibe, med fyldig vejledning.
Download or read book Basics of Ship Modeling written by Mike Ashey and published by Kalmbach Publishing, Co.. This book was released on 2000 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the basics of building ships from kits. This skill-building how-to book offers you step-by-step photo instructions covering basic assembly of hulls, superstructures, guns, railings, anchors, and more. Also includes information on detailing and painting.
Download or read book Creative Ship Model Making written by Gerhard O.W. Fischer and published by Verlag für Technik und Handwerk. This book was released on with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is often annoying that every kit model built from the same kit of the same company is like one egg from the other. This is what creative ship modelling aims to change! Using prefabricated hulls, it is mainly a matter ofthe superstructure, which must be redesigned, sawn out and further processed and further processed, without the need for a construction template. The conversion of kit models shows how to convert ready-built models to a completely new model by converting them to jet propulsion. Finally, the author presents four examples how larger display models can be converted into real driving models to properly running RC ship models by installing a remote-control system. From the content: • Construction of models according to own designs • Building description of two creative models • Building a police boat according to own ideas • Two creative construction models - The MULTIBOAT • A speedboat and a mega luxury yacht • Conversion of kit models - The FLORIDA as a jet model • The RAPIDO 600 as a jet model • A customs cruiser and a fishery protection boat • Conversion of display models to RC models • Cruise ship QUEEN MARY 2 • Sea rescue cruiser HERMANN MARWEDE • German submarine class VII C • American submarine GATO class • REVELL RC ship model already at the end of the 50s
Download or read book Proceedings of the Fourth International Conference in Ocean Engineering ICOE2018 written by K. Murali and published by Springer. This book was released on 2019-01-16 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected proceedings of the Fourth International Conference in Ocean Engineering (ICOE2018), focusing on emerging opportunities and challenges in the field of ocean engineering and offshore structures. It includes state-of-the-art content from leading international experts, making it a valuable resource for researchers and practicing engineers alike.
Download or read book Miniature Ship Models written by Paul Jacobs and published by Seaforth Publishing. This book was released on 2008-05-30 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first comprehensive history of how the 1:1200 scale and its 1:1250 continental equivalent became accepted as the modern standard for miniature ship models. The origins can be traced back to the first years of the twentieth century and their use as identification aids by the military during the First World War, but when peace came the manufacturers aimed their increasingly sophisticated products at collectors, and acquiring, modifying or scratch-building miniature ship models has been an avidly pursued hobby ever since. This book charts the commercial rise and fall of the manufacturers, and the advancing technology that produces ever more detailed and accurate replicas. The author - himself a lifetime collector and builder of models - looks at the products of each manufacturer, past and present, rating their quality and suggesting why some are regarded as more collectible than others. But the book deals with more than off-the-shelf models, covering subsidiary issues like painting, modifying and diorama settings, and is illustrated throughout with many of the finest examples of the genre. The combination of fascinating background information with stunning visual presentation will make this book irresistible to any collector or enthusiast.
Download or read book The Sailing Frigate written by ROBERT GARDINER and published by Naval Institute Press. This book was released on 2013-02-15 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The National Maritime Museum in Greenwich houses the largest collection of scale ship models in the world. Many of the models are official, contemporary artifacts made by the craftsmen of the Royal Navy or the shipbuilders themselves, ranging from the mid-seventeenth century to the present day. As such they represent a three-dimensional archive of unique importance and authority. Treated as historical evidence, they offer more detail than even the best plans, and demonstrate exactly what the ships looked like in a way that even the finest marine painter could not achieve. Now available in paperback, this book tells the story of the evolution of the cruising ship under sail. It includes a large number of model photos all in full-color as well as close-up and detail views. These are captioned in depth, but many are also annotated to focus attention on interesting or unusual features. Although pictorial in emphasis, The Sailing Frigate weaves the pictures into an authoritative text, producing an unusual and attractive form of technical history. While the series will be of particular interest to ship modelers, all those with an interest in ship design and development will be attracted to the in-depth analysis of these beautifully presented books.
Download or read book A Dictionary of Applied Physics written by Sir Richard Glazebrook and published by . This book was released on 1923 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 15th International Ship and Offshore Structures Congress written by A.E Mansour and published by Elsevier. This book was released on 2003-06-26 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: KEY FEATURES: Provides researchers in Ocean engineering with a thorough review of the latest research in the field Lengthy reports by leading experts A valuable resource for all interested in ocean engineering DESCRIPTION: The International Ship and Offshore Congress (ISSC) is a forum for the exchange of information by experts undertaking and applying marine structural research. These three volumes contain the eight technical committee reports, six Specialist Committee and 2 Special Task Committee reports which were presented for the 15th International Ship and Offshore Structures Congress (ISSC 2004) in San Diego USA, between 11th and 15th August 2003. Volume III will be published in 2004 and is to contain the discussion of the reports, the chairmen's reply, the text of the invited Lecture and the congress report of ISSC 2003.
Download or read book Ship Models from Kits written by Dr David Griffith and published by Seaforth Publishing. This book was released on 2011-02-28 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past thirty years the world of model kits has undergone a veritable revolution. New techniques in injection moulding have improved the scale accuracy and surface detail of the humble plastic kit, while many specialist companies now produce top-quality resin models, vastly broadening the range of subjects on the market. However, the really radical change has been the advent of photo-etched brass fret, which allows the finest detail to be reproduced to scale. In ship modelling, this has resulted in a new form of the hobby, mid-way between traditional build-from-the-box simplicity and the time-consuming demands of fabricating everything from scratch. These new materials have prompted innovative techniques, which are comprehensively demonstrated in this new manual. Designed for those wishing to achieve the best results from their ship kits in the 1:700 to 1:350 range of scales, it uses step by step photographs to take the reader through the building of two models, one in plastic and one in resin, from basic construction, fittings and detailing, to painting, finishing and display. Written by a highly experienced, award-winning ship modeller, the book is a showcase for the contemporary approach to the hobby.
Download or read book Ships and Offshore Structures XIX written by Carlos Guedes Soares and published by CRC Press. This book was released on 2015-09-03 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume work presents the proceedings from the 19th International Ship and Offshore Structures Congress held in Cascais, Portugal on 7th to 10th September 2015. The International Ship and Offshore Structures Congress (ISSC) is a forum for the exchange of information by experts undertaking and applying marine structural research.The aim of