Download or read book Functionalization of Polyolefins written by T. C. Mike Chung and published by Elsevier. This book was released on 2002-02-04 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyolefins are the most widely used commercial polymers and their functionalization has been a long standing scientific challenge and an industrially important area. In recent decades significant progress has been made in the area, with exciting results reported in many journals. Functionalization of Polyolefins is the first book to summarize the significant experimental results on the functionalization of polyolefins and classify them into several chemical methods (shown in each chapter of this book). The book also provides an update on the functional polyolefin materials available today. The two key subject categories covered are: Chemical approaches in the functionalization of polyolefins New available polyolefin materials and their potential applications The book includes: The historic development and future prospects for polyolefins Functionalization chemistry, classified into four general approaches Chemical approaches with experimental results Functionalization approaches The book provides an invaluable reference for researchers in industry and academia interested in functionalization chemistry and polymers. It has been developed through Professor Chung's own teaching experience, both at Pennsylvania State University and on short courses. It is therefore ideally suited as a core text for advanced polymer chemistry and courses on polyolefins and polymers, as well as being a useful supplementary reference for introductory courses on polyolefin chemistry and materials. T.C. Mike Chung is Professor of Polymer Science in the Materials Science and Engineering Department, Pennsylvania State University, USA. He is one of the most experienced people in the field of polyolefin functionalization, with a wide-ranging knowledge gained through many years of experience both in academia and industry. Shows the available functionalisation approaches with a discussion of their scope and limitations Written by one of the most experienced people in this field

Download or read book Functionalization of Polyolefins written by T. C. Chung and published by Academic Press. This book was released on 2002-02-28 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the significant experimental results on the functionalization of polyolefins and classifies them into several chemical methods. This book also provides information on the functional polyolefin materials. It covers: chemical approaches in the functionalization of polyolefins, and polyolefin materials and their potential applications.

Download or read book Polyolefin Blends written by Domasius Nwabunma and published by John Wiley & Sons. This book was released on 2008-01-02 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive reference on the properties and applications of polyolefin blends Polyolefins account for more than half of total plastics consumption in the world. In recent years, usage of and research on polyolefin blends have increased significantly due to new applications in medicine, packaging, and other fields and the development of novel polyolefins. With a special emphasis on nano- and micro-structures of crystals and phase morphology, Polyolefin Blends condenses and consolidates current information on polyolefins so that the reader can compare, select, and integrate a material solution. Focusing exclusively on the fundamental aspects as well as applications of polyolefin blends, this authoritative reference: * Features an introductory chapter that serves as a guide to polyolefin blends * Includes chapters covering formulation design, processing, characterization, modeling and simulation, engineering performance properties, and applications * Covers polyolefin/polyolefin blends and polyolefin/non-polyolefin blends * Discusses miscibility, phase behavior, functionalization, compatibilization, microstructure, crystallization, hierarchical morphology, and physical and mechanical properties * Covers new research trends including in-situ reactor blending and reactive processing, such as compatibilization/functionalization in the melt * Contains practical examples from open literature sources and commercial products With chapters contributed by leading experts from several countries, this is a must-have reference for scientists and engineers conducting research on polyolefin blends and for professionals in medical, packaging, and other commodity fields. It is also an excellent text for graduate students studying polymer science and polymer processing.

Download or read book Main Chain Modification as a Result of Polyolefin Functionalization by Different Techniques written by Rosestela Perera and published by Nova Novinka. This book was released on 2010-07-01 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Advances in Polyolefins written by T.C. Chung and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyolefin is one of the most important materials produced in the chemical industry. The research in this area is not only scientifically challenging but also potentially economically rewarding. Many research activities, such as developing new catalysts, understanding polymerization mechanisms, modifying the products and improving the physical properties of the material, have been proceeding at a very fast pace, especially in the industrial laboratories in many countries. It is very important and exciting to bring researchers active in this area, from both the academic and industrial sectors, to communicate their new findings. To the best of my knowledge, a symposium covering diverse aspects of polyolefin research has not been held in the USA for many years. With this in mind, a symposium entitled "Recent Advances in Polyolefins" was held at the National ACS Meeting in Washington D. C. , August 23-28, 1992. This symposium covered both scientific and technological aspects of polyolefin, which included four sections: CatalystIPolymerization, Functionalization of Polyolefins, Blends of Polyolefins with Other Polymers, and Applications. More than 50 papers, including 20 foreign contributions, were presented during three and a half days of meetings. It was truly exciting to see key researchers from both academic and industrial laboratories exchange their recent results and to share the important developments in polyolefins. This volume is based on the same spirit and is intended to capture some of the most recent and emerging technical achievements presented at the meeting.

Download or read book Main Chain Modification as a Result of Polyolefin Functionalization by Different Techniques written by Rosestela Perera and published by Nova Novinka. This book was released on 2010 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: When polyolefins are functionalised to modify its chemical structure and polarity, some other secondary reactions take place as well. The grafting of a different monomer onto the main chain of the polymer involves the use of a free radical initiator, such as a peroxide, or irradiation of the sample (gamma rays or ultrasound), that not only provide the free radicals for the grafting but also for main chain modifications. Different reaction processes such as functionalisation in solution, reactive extrusion or irradiation produce different structures. This book deals with modifications of the main chain as a consequence of polyolefin grafting through different techniques, such as functionalisation in solution and reactive extrusion and through polymer irradiation with gamma rays and ultrasound.

Download or read book Reactive Modifiers for Polymers written by S. Al-Malaika and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical modification of polymers by reactive modifiers is no longer an academic curiosity but a commercial reality that has delivered a diverse range of speciality materials for niche markets: reactively grafted styrenic alloys, maleated polyolefins, super-tough nylons, silane modified and moisture-cured polyolefins, and thermoplastic elastomers, are but few exam ples of commercial successes. Although the approach of reactive modification of polymers has been largely achieved either in solution or in the solid state (through in situ reactions in polymer melts), it is the latter route that has attracted most attention in the last two decades owing to its flexibility and cost-effective ness. This route, referred to as reactive processing, focuses on the use of suitable reactive modifier(s) and the adoption of conventional polymer processing machinery, an extruder or a mixer, as a chemical reactor, to perform in situ targeted reactions for chemical modification of preformed polymers. This relatively simple, though scientifically highly challenging, approach to reactive modification offers unique opportunities in exploiting various reactive modifiers for the purpose of altering and transforming in a controlled manner the properties of preformed commercial polymers into new/speciality materials with tailor-made properties and custom-designed performance for target applications. Such an economically attractive route constitutes a radical diversion away from the traditional practices of manufacturing new polymers from monomers which involves massive in vestments in sophisticated technologies and chemical plants.

Download or read book Reactive and Functional Polymers Research Advances written by Matheus I. Barroso and published by Nova Publishers. This book was released on 2008 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents research on inorganic and organic functional polymers, both solid and liquid, acting as reagents, catalysts, carriers of protecting groups, templates, ion-exchangers, selective sorbents, chelating agents, supports for enzymes and cells, and the like. This book also covers reactive crosslinkable prepolymers, and degradable polymers.

Download or read book Solid State Shear Pulverization written by Klementina Khait and published by CRC Press. This book was released on 2001-04-30 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Preface This book is the first extended look at a new and multifaceted polymer processing technology that has already been discussed in numerous articles. Called Solid-State Shear Pulverization (S3P), this innovative process produces polymeric powders with unique physical properties not found in the output of conventional size-reduction methods.... This technology, which utilizes a pulverizer based on a modified co-rotating twin-screw extruder..., has profound implications for both the creation of new polymer blends and recycling of plastic and rubber waste. Unlike [earlier processes] where polymers are melted prior to pulverization, ...pulverizing mixtures of polymers with the S3P process...does not involve melting. By contrast, S3P maintains polymers in the solid state and avoids the additional heat history that occurs during [other processes], which can be detrimental to the physical properties of pulverized materials. The research and development of the S3P technology...has grown significantly since 1990 from the development of a new plastics recycling process to a much broader polymer processing method that allows intimate mixing of polymers with very different viscosities, sold-state dispersion of additives, including pigments, and continuous production of powder with unique shapes and larger surface areas. Polymeric powders are of growing importance to plastics processors due to the increase use of plastics in various applications, such as rotational molding, powder coatings, and compounding, which require powder as the feedstock. ...[I]t has become clear that this process allows for in-situ compatibilization of dissimilar polymers by applying mechanical energy to cause chemical reactions. This aspect of S3P technology that we describe in this book should [be useful in] developing new polymer blends with the use of pre-made compatibilizing agents. In addition, it has been discovered that S3P efficiently mixes polymer blends with different component viscosities, resulting in the elimination of phase inversion. The S3P process directly produces blends with matrix and dispersed phase morphology like those obtained after phase inversion during a long melt-mixing process. This phenomenon is of practical importance because a long processing time is required by conventional melt-mixing to produce a stable blend morphology. S3P is also advantageous for producing thermoplastic or thermoset powder-coating compounds in a one-step process as opposed to a conventional multi-step operation that involves melt extrusion followed by batch grinding. The major capabilities of this new process can be summarized as follows: o Continuous powder production from plastics or rubber feedstocks o Blending of immiscible polymers o Efficient mixing of polymers with unmatched viscosities o Environmentally friendly recycling of multicolored, commingled plastics waste o Sold-state dispersion of heat-sensitive additives o Engineered plastic/rubber blends Materials and processes well illustrated The text is well illustrated with 60 photographs, micrographs, diagrams and others figures. Here is a small sampling of the captions of these figures. o Particle-size distribution for virgin LDPE powder made with PT-25 pulverizer o Optical photograph of virgin LDPE powder made with PT-25 pulverizer o Layout for a three-stage rubber pulverizer o Flow chart for powder coating production by conventional process and with new S3P technology o SEM image of pulverized virgin PP at 40X (first in series of SEM images of polymer powders) o Optical micrograph of melt-crystallized thin films of unpulverized virgin PP under polarized light o Log of viscosity vs. log shear rate for virgin HDPE after S3P processing o Gel permeation chromatograms (GPC) of polystyrene subjected to S3P processing Color-photo section One of the several functions of Solid-State Shear Pulverization technology is recycling mixed plastic waste. This section of twenty full-color photographs and micrographs illustrates different processed materials, as well as the machinery and mixed waste used. Here is a small sampling of the photo and micrograph captions. o Resultant flake feedstock from granulation o S3P-made uniform powder from feedstock o Flake feedstock of post-consumer HDPE/PP blend (90/10 ratio) o Injection-molded test bar (with translucence) made from S3P powder without pelletization o Injection-molded test bar made from S3P powder without pelletization showing uniform color o Several test bars subjected to tensile testing showing exceptionally high elongation at break Useful reference data in tables More than 60 tables provide useful data in convenient form. Here is a small sampling of table captions. o Physical properties of virgin PP 8020 GU injection-molded from S3P-made powder (first in series of tables on physical properties of various plastics processed from S3P-made powder) o Sieve analysis of powder resulting from S3P of virgin LDPE 509.48 (one of series of tables on sieve analysis of polymer powders) o Melt-flow rate before and after S3P processing for virgin PS and two PP samples o Key physical properties of injection-molded post-consumer polyolefin blends pulverized by S3P process The Authors Klementina Khait, M.S. Ch.E., Ph.D., is Research Associate Professor and Director of the Polymer Technology Center in the Department of Chemical Engineering, Northwestern University. Her industrial experience in polymer science and engineering includes work with Borg-Warner Chemicals and Quantum Chemical Corporation. She received her two advanced degrees, in chemical engineering and polymer chemistry, from the Technological Institute, St. Petersburg, Russia. Dr. Khait holds several patents and has published more than 50 papers in scientific and technical journals. Stephen Carr, Ph.D., is Professor of Materials Science and Engineering and Chemical Engineering at Northwestern University. His industrial work includes work in polymer science and engineering with General Motors Corp. He received a doctorate in polymer science from Case Western Reserve University. He has been on the Northwestern University faculty since 1969. Martin H. Mack is Vice President for R&D with the Berstorff Division of Krauss-Maffei Corporation. He holds an engineering degree from the University of Stuttgart. He has served for more than ten years on the Board of Directors of the Society of Plastics Engineers (SPE).

Download or read book Polymer Modification written by Graham G. Swift and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of an ACS-PMSE Division Symposium held in Orlando, Florida, August 21-25, 1996

Download or read book Introduction to Industrial Polypropylene written by Dennis B. Malpass and published by John Wiley & Sons. This book was released on 2012-07-02 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text is an important resource for new engineers, chemists, students, and chemical industry personnel to understand the technical aspects of polypropylene which is the 2nd largest synthetics polymer in manufactured output. The book considers the following topics: What are the principal types of polypropylene and how do they differ? What catalysts are used to produce polypropylene and how do they function? What is the role of cocatalysts and how have they evolved over the years? How are industrial polypropylene catalysts tested and the resultant polymer evaluated? What processes are used in the manufacture of polypropylene? What are the biopolymer alternatives to polypropylene? What companies are the major industrial manufacturers of polypropylene? What is the environmental fate of polypropylene?

Download or read book Reactive Extrusion written by Günter Beyer and published by John Wiley & Sons. This book was released on 2018-01-03 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive overview of reactive extrusion technology for over a decade combines the views of contributors from both academia and industry who share their experiences and highlight possible applications and markets. They also provide updated information on the underlying chemical and physical concepts, summarizing recent developments in terms of the material and machinery used. As a result, readers will find here a compilation of potential applications for reactive extrusion to access new and cost-effective polymeric materials, while using existing compounding machines.

Download or read book Antioxidant Polymers written by Giuseppe Cirillo and published by John Wiley & Sons. This book was released on 2012-06-07 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Antioxidant Polymers is an exhaustive overview of the recent developments in the field of polymeric materials showing antioxidant properties. This research area has grown rapidly in the last decade because antioxidant polymers have wide industry applications ranging from materials science to biomedical, pharmaceuticals and cosmetics.

Download or read book Metal Polymer Systems written by Jörg Florian Friedrich and published by John Wiley & Sons. This book was released on 2017-12-04 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The result of decades of research by a pioneer in the field, this is the first book to deal exclusively with achieving high-performance metal-polymer composites by chemical bonding. Covering both the academic and practical aspects, the author focuses on the chemistry of interfaces between metals and polymers with a particular emphasis on the chemical bonding between the different materials. He elucidates the various approaches to obtaining a stable interface, including, but not limited to, thermodynamically driven redox reactions, bond protection to prevent hydrolysis, the introduction of barrier layers, and stabilization by spacer molecules. Throughout, chemical bonding is promoted as a simple and economically viable alternative to adhesion based on reversible weak physical interaction. Consequently, the text equips readers with the practical tools necessary for designing high-strength metal-polymer composites with such desired properties as resilience, flexibility, rigidity or degradation resistance.

Download or read book Polyolefins 50 years after Ziegler and Natta II written by Walter Kaminsky and published by Springer. This book was released on 2013-11-29 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.

Download or read book Advances in Polyolefin Nanocomposites written by Vikas Mittal and published by CRC Press. This book was released on 2010-12-07 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of polymer nanocomposites, research on polyolefin nanocomposites has grown exponentially. Correcting the deficiency of a meaningful text on these important materials, Advances in Polyolefin Nanocomposites:Sums up recent advances in nanoscale dispersion of filler in polyolefinsPresents a basic introduction to polyolefin nanocomposite

Download or read book Handbook of Thermoplastics written by Olagoke Olabisi and published by CRC Press. This book was released on 2016-02-03 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the bestselling Handbook of Thermoplastics incorporates recent developments and advances in thermoplastics with regard to materials development, processing, properties, and applications. With contributions from 65 internationally recognized authorities in the field, the second edition features new and updated discussions of seve