Download or read book Circuits and Systems for Future Generations of Wireless Communications written by Aleksandar Tasic and published by Springer Science & Business Media. This book was released on 2009-05-16 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this book originated from a Special Session on Circuits and Systems for Future Generations of Wireless Communications that was presented at the 2005 InternationalSymposiumon Circuits and Systems, which was then followed by two Special Issues bearing the same title that appeared in the March and April 2008 issues of the IEEE Transactions on Circuits and Systems – Part II: Express Briefs. Out of a large number of great contributions, we have selected those tting best the book format based on their quality. We would like to thank all the authors, the reviewers of the Transactions on Circuits and Systems – Part II, and the reviewers of the nal book material for their efforts in creating this manuscript. We also thank the Springer Editorial Staff for their support in putting together all the good work. We hope that this book will provide you, the reader, with new insights into Circuits and Systems for Future Generations of Wireless Communications.

Download or read book Silicon Based RF Front Ends for Ultra Wideband Radios written by Aminghasem Safarian and published by Springer Science & Business Media. This book was released on 2007-12-28 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive study of silicon-based distributed architectures in wideband circuits are presented in this book. Novel circuit architectures for ultra-wideband (UWB) wireless technologies are described. The book begins with an introduction of several transceiver architectures for UWB. The discussion then focuses on RF front-end of the UWB radio. Therefore, the book will be of interest to RF circuit designers and students.

Download or read book Radio Frequency Integrated Circuit Engineering written by Cam Nguyen and published by John Wiley & Sons. This book was released on 2015-03-03 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio-Frequency Integrated-Circuit Engineering addresses the theory, analysis and design of passive and active RFIC's using Si-based CMOS and Bi-CMOS technologies, and other non-silicon based technologies. The materials covered are self-contained and presented in such detail that allows readers with only undergraduate electrical engineering knowledge in EM, RF, and circuits to understand and design RFICs. Organized into sixteen chapters, blending analog and microwave engineering, Radio-Frequency Integrated-Circuit Engineering emphasizes the microwave engineering approach for RFICs. * Provides essential knowledge in EM and microwave engineering, passive and active RFICs, RFIC analysis and design techniques, and RF systems vital for RFIC students and engineers * Blends analog and microwave engineering approaches for RFIC design at high frequencies * Includes problems at the end of each chapter

Download or read book Radio Design in Nanometer Technologies written by Mohammed Ismail and published by Springer. This book was released on 2010-10-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio Design in Nanometer Technologies is the first volume that looks at the integrated radio design problem as a "piece of a big puzzle", namely the entire chipset or single chip that builds an entire wireless system. This is the only way to successfully design radios to meet the stringent demands of today’s increasingly complex wireless systems.

Download or read book Broadband Circuits for Optical Fiber Communication written by Eduard Säckinger and published by John Wiley & Sons. This book was released on 2005-05-27 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: An expert guide to the new and emerging field of broadband circuits for optical fiber communication This exciting publication makes it easy for readers to enter into and deepen their knowledge of the new and emerging field of broadband circuits for optical fiber communication. The author's selection and organization of material have been developed, tested, and refined from his many industry courses and seminars. Five types of broadband circuits are discussed in detail: * Transimpedance amplifiers * Limiting amplifiers * Automatic gain control (AGC) amplifiers * Lasers drivers * Modulator drivers Essential background on optical fiber, photodetectors, lasers, modulators, and receiver theory is presented to help readers understand the system environment in which these broadband circuits operate. For each circuit type, the main specifications and their impact on system performance are explained and illustrated with numerical values. Next, the circuit concepts are discussed and illustrated with practical implementations. A broad range of circuits in MESFET, HFET, BJT, HBT, BiCMOS, and CMOS technologies is covered. Emphasis is on circuits for digital, continuous-mode transmission in the 2.5 to 40 Gb/s range, typically used in SONET, SDH, and Gigabit Ethernet applications. Burst-mode circuits for passive optical networks (PON) and analog circuits for hybrid fiber-coax (HFC) cable-TV applications also are discussed. Learning aids are provided throughout the text to help readers grasp and apply difficult concepts and techniques, including: * Chapter summaries that highlight the key points * Problem-and-answer sections to help readers apply their new knowledge * Research directions that point to exciting new technological breakthroughs on the horizon * Product examples that show the performance of actual broadband circuits * Appendices that cover eye diagrams, differential circuits, S parameters, transistors, and technologies * A bibliography that leads readers to more complete and in-depth treatment of specialized topics This is a superior learning tool for upper-level undergraduates and graduate-level students in circuit design and optical fiber communication. Unlike other texts that concentrate on analog circuits in general or mostly on optics, this text provides balanced coverage of electronic, optic, and system issues. Professionals in the fiber optic industry will find it an excellent reference, incorporating the latest technology and discoveries in the industry.

Download or read book RFID Handbook written by Klaus Finkenzeller and published by John Wiley & Sons. This book was released on 2010-11-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third revised edition of the established and trusted RFID Handbook; the most comprehensive introduction to radio frequency identification (RFID) available. This essential new edition contains information on electronic product code (EPC) and the EPC global network, and explains near-field communication (NFC) in depth. It includes revisions on chapters devoted to the physical principles of RFID systems and microprocessors, and supplies up-to-date details on relevant standards and regulations. Taking into account critical modern concerns, this handbook provides the latest information on: the use of RFID in ticketing and electronic passports; the security of RFID systems, explaining attacks on RFID systems and other security matters, such as transponder emulation and cloning, defence using cryptographic methods, and electronic article surveillance; frequency ranges and radio licensing regulations. The text explores schematic circuits of simple transponders and readers, and includes new material on active and passive transponders, ISO/IEC 18000 family, ISO/IEC 15691 and 15692. It also describes the technical limits of RFID systems. A unique resource offering a complete overview of the large and varied world of RFID, Klaus Finkenzeller’s volume is useful for end-users of the technology as well as practitioners in auto ID and IT designers of RFID products. Computer and electronics engineers in security system development, microchip designers, and materials handling specialists benefit from this book, as do automation, industrial and transport engineers. Clear and thorough explanations also make this an excellent introduction to the topic for graduate level students in electronics and industrial engineering design. Klaus Finkenzeller was awarded the Fraunhofer-Smart Card Prize 2008 for the second edition of this publication, which was celebrated for being an outstanding contribution to the smart card field.

Download or read book Ultra Wideband Systems written by Roberto Aiello Ph.D. and published by Elsevier. This book was released on 2006-06-12 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra wideband technology turns the radio spectrum available to wireless applications from a country road into a high-speed ten lane super freeway, and the destination is the future of wireless technology. UWB is a huge leap forward because it offers wide bandwidth with little interference, allowing multiple UWB signals to share a single channel. This multi-author volume, compiled under the guidance of Dr. Roberto Aiello, introduces the theory and concepts behind ultra wideband (UWB) systems as well as their applications. Authors include those involved in creating the UWB standards, researchers, and applications specialists. This book has been broken down into three parts: introduction to UWB, different techniques available, and applications. Within these sections topics covered are UWB spectrum and regulations, UWB channels, modulation techniques, antennas, signal propagation, and UWB transceiver architectures. This book has all the information RF/wireless engineers will need to understand this burgeoning technology. *An all-star list of contributors covers the subject more authoritatively than any single author could *Discusses U.S. and international ultra wideband regulations *Includes material on antenna systems and signal propagation at ultra wideband frequencies

Download or read book Wireless Communications Circuits and Systems written by Institution of Electrical Engineers and published by IET. This book was released on 2004 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines integrated circuits, systems and transceivers for wireless and mobile communications. It covers the most recent developments in key RF, IF, analogue, mixed-signal components and single-chip transceivers in CMOS technology.

Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 5G Mobile and Wireless Communications Technology written by Afif Osseiran and published by Cambridge University Press. This book was released on 2016-06-02 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the 5G landscape covering technology options, most likely use cases and potential system architectures.

Download or read book Fiber Optics Engineering written by Mohammad Azadeh and published by Springer Science & Business Media. This book was released on 2009-08-05 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the past few decades, information technologies have been evolving at a tremendous rate, causing profound changes to our world and our ways of life. In particular, fiber optics has been playing an increasingly crucial role within the telecommunication revolution. Not only most long-distance links are fiber based, but optical fibers are increasingly approaching the individual end users, providing wide bandwidth links to support all kinds of data-intensive applications such as video, voice, and data services. As an engineering discipline, fiber optics is both fascinating and challenging. Fiber optics is an area that incorporates elements from a wide range of techno- gies including optics, microelectronics, quantum electronics, semiconductors, and networking. As a result of rapid changes in almost all of these areas, fiber optics is a fast evolving field. Therefore, the need for up-to-date texts that address this growing field from an interdisciplinary perspective persists. This book presents an overview of fiber optics from a practical, engineering perspective. Therefore, in addition to topics such as lasers, detectors, and optical fibers, several topics related to electronic circuits that generate, detect, and process the optical signals are covered. In other words, this book attempts to present fiber optics not so much in terms of a field of “optics” but more from the perspective of an engineering field within “optoelectronics.

Download or read book PHASELOCK TECHNIQUES 1966 REPR 1967 written by Floyd Martin Gardner and published by . This book was released on 1966 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Digital Communications written by Ali Grami and published by Academic Press. This book was released on 2015-02-25 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Digital Communications explores the basic principles in the analysis and design of digital communication systems, including design objectives, constraints and trade-offs. After portraying the big picture and laying the background material, this book lucidly progresses to a comprehensive and detailed discussion of all critical elements and key functions in digital communications. - The first undergraduate-level textbook exclusively on digital communications, with a complete coverage of source and channel coding, modulation, and synchronization. - Discusses major aspects of communication networks and multiuser communications - Provides insightful descriptions and intuitive explanations of all complex concepts - Focuses on practical applications and illustrative examples. - A companion Web site includes solutions to end-of-chapter problems and computer exercises, lecture slides, and figures and tables from the text

Download or read book Radio Frequency Transistors written by Helge Granberg and published by Elsevier. This book was released on 2013-10-22 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellular telephones, satellite communications and radar systems are adding to the increasing demand for radio frequency circuit design principles. At the same time, several generations of digitally-oriented graduates are missing the essential RF skills. This book contains a wealth of valuable design information difficult to find elsewhere.It's a complete 'tool kit' for successful RF circuit design. Written by experienced RF design engineers from Motorola's semiconductors product section.Book covers design examples of circuits (e.g. amplifiers; oscillators; switches; pulsed power; modular systems; wiring state-of-the-art devices; design techniques).

Download or read book Data Acquisition Systems written by Maurizio Di Paolo Emilio and published by Springer Science & Business Media. This book was released on 2013-03-21 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of data acquisition systems, how they enable users to sample signals that measure real physical conditions and convert the resulting samples into digital, numeric values that can be analyzed by a computer. The author takes a problem-solving approach to data acquisition, providing the tools engineers need to use the concepts introduced. Coverage includes sensors that convert physical parameters to electrical signals, signal conditioning circuitry to convert sensor signals into a form that can be converted to digital values and analog-to-digital converters, which convert conditioned sensor signals to digital values. Readers will benefit from the hands-on approach, culminating with data acquisition projects, including hardware and software needed to build data acquisition systems.

Download or read book Advanced Microwave Circuits and Systems written by Vitaliy Zhurbenko and published by BoD – Books on Demand. This book was released on 2010-04-01 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on recent research work conducted by the authors dealing with the design and development of active and passive microwave components, integrated circuits and systems. It is divided into seven parts. In the first part comprising the first two chapters, alternative concepts and equations for multiport network analysis and characterization are provided. A thru-only de-embedding technique for accurate on-wafer characterization is introduced. The second part of the book corresponds to the analysis and design of ultra-wideband low- noise amplifiers (LNA).

Download or read book The Mobile Radio Propagation Channel written by John David Parsons and published by . This book was released on 1992 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: By equipping the reader with a thorough understanding of the physical processes that underlie the propagation of radio waves, this systematic approach will prove to be an authoritative and attractive text for researchers, systems designers, university academics and postgraduate students.