Download or read book Fuels and Lubricants Handbook written by and published by ASTM International. This book was released on with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Lubrication and Tribology written by Robert W. Bruce and published by CRC Press. This book was released on 2012-07-06 with total page 1173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the best-selling first edition, the growing price and environmental cost of energy have increased the significance of tribology. Handbook of Lubrication and Tribology, Volume II: Theory and Design, Second Edition demonstrates how the principles of tribology can address cost savings, energy conservation, and environmental protection. This second edition provides a thorough treatment of established knowledge and practices, along with detailed references for further study. Written by the foremost experts in the field, the book is divided into four sections. The first reviews the basic principles of tribology, wear mechanisms, and modes of lubrication. The second section covers the full range of lubricants/coolants, including mineral oil, synthetic fluids, and water-based fluids. In the third section, the contributors describe many wear- and friction-reducing materials and treatments, which are currently the fastest growing areas of tribology, with announcements of new coatings, better performance, and new vendors being made every month. The final section presents components, equipment, and designs commonly found in tribological systems. It also examines specific industrial areas and their processes. Sponsored by the Society of Tribologists and Lubrication Engineers, this handbook incorporates up-to-date, peer-reviewed information for tackling tribological problems and improving lubricants and tribological systems. The book shows how the proper use of generally accepted tribological practices can save money, conserve energy, and protect the environment.
Download or read book Standard Handbook Oil Spill Environmental Forensics written by Scott Stout and published by Academic Press. This book was released on 2016-02-03 with total page 1143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard Handbook Oil Spill Environmental Forensics: Fingerprinting and Source Identification, Second Edition, provides users with the latest information on the tools and methods that have become popular over the past ten years. The book presents practitioners with the latest environmental forensics techniques and best practices for quickly identifying the sources of spills, how to form an effective response, and how to determine liability. This second edition represents a complete overhaul of the existing chapters, and includes 13 new chapters on methods and applications, such as emerging application of PAHi isomers in oil spill forensics, development and application of computerized oil spill identification (COSI), and fingerprinting of oil in biological and passive sampling devices. - Contains 13 new chapters on methods and applications, including emerging application of PAH isomers in oil drill forensics, the development and application of computerized oil spill identification (COSI), and the fingerprinting of oil in biological and passive sampling devices - Presents the latest technology and methods in biodegradation of oil hydrocarbons and its implications for source identification, surface trajectory modeling of marine oil spills, and identification of hydrocarbons in biological samples for source determination - Contains new case studies to illustrate key applications, methods, and techniques
Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2021-03-14 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids, Third Edition delivers all the necessary lists of chemicals by use, their basic components, benefits and environmental implications. Instead of searching through various sources, this updated reference presents a one-stop, non-commercialized approach by organizing products by function, matching the chemical to the process for practical problem-solving, and extending coverage with additional resources and supportive materials. Updates include shale specific fluids and organic additives, including swellable polymers and multi-walled carbon nanotubes. Covering the full spectrum, including fluid loss additives and oil spill treating agents, this book is ideal for every oil and gas operation with its options for lower costs, sustainable use and enhanced production. - Helps readers effectively locate and utilize the right chemical application specific to their oil and gas operation - Includes updated sections on shale specific fluids, defoamers and organic additives, including biodegradable waste and swellable polymers - Covers environmental factors and risks for oil field chemicals, along with the pluses and minuses of each application
Download or read book Handbook of Metrology and Applications written by Dinesh K. Aswal and published by Springer Nature. This book was released on 2023-08-23 with total page 2504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides comprehensive and up-to-date information on the topic of scientific, industrial and legal metrology. It discusses the state-of-art review of various metrological aspects pertaining to redefinition of SI Units and their implications, applications of time and frequency metrology, certified reference materials, industrial metrology, industry 4.0, metrology in additive manufacturing, digital transformations in metrology, soft metrology and cyber security, optics in metrology, nano-metrology, metrology for advanced communication, environmental metrology, metrology in biomedical engineering, legal metrology and global trade, ionizing radiation metrology, advanced techniques in evaluation of measurement uncertainty, etc. The book has contributed chapters from world’s leading metrologists and experts on the diversified metrological theme. The internationally recognized team of editors adopt a consistent and systematic approach and writing style, including ample cross reference among topics, offering readers a user-friendly knowledgebase greater than the sum of its parts, perfect for frequent consultation. Moreover, the content of this volume is highly interdisciplinary in nature, with insights from not only metrology but also mechanical/material science, optics, physics, chemistry, biomedical and more. This handbook is ideal for academic and professional readers in the traditional and emerging areas of metrology and related fields.
Download or read book New advancements in fuels and lubricants for the aerospace industry written by Cemil KOYUNOĞLU and published by Hiperlink eğit.ilet.yay.san.tic.ve ltd.sti.. This book was released on 2018-12-31 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to all employees who contributed to the Inonu-Pal laboratory established in Malatya Inonu University in 2007-2010. This first part of the 20 chapters of the book consists of information written by Cemil Koyunoğlu in his spare time between the years of 2015-2016 at the Istanbul Technical University, where he went to work for his doctoral dissertation. Only the first 6 chapters of the author's document have been technical edited by SAE International employee William Kucinski. I would like to thank Mônica Nogueira, William Kucinski and Mark P. DeAngelo for their help. Azerbaijan's Nargin Island was one of the places where Ottoman soldiers were captured during World War I. On the 101st anniversary of the Sarıkamış operation, a group from Kars was visited by the martyrs. Turkish pilot Vecihi Hürkuş was among those captured in the island.
Download or read book Water Based Chemicals and Technology for Drilling Completion and Workover Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2015-02-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil and gas engineers today use three main factors in deciding drilling fluids: cost, performance, and environmental impact, making water-based products a much more attractive option. Water-Based Chemicals and Technology for Drilling, Completion, and Workover Fluids effectively delivers all the background and infrastructure needed for an oil and gas engineer to utilize more water-based products that benefit the whole spectrum of the well's life cycle. Helping to mitigate critical well issues such as formation damage, fluid loss control, and borehole repair, more operators demand to know the full selection of water-based products available to consistently keep a peak well performance. This must-have training guide provides the necessary coverage in the area, broken down by type and use, along with an extensive list of supportive materials such as a chemical index of structural formulas and helpful list of references for further reading. In addition to understanding the types, special additives, and chemical compatibilities of the products available, the reader will also learn proper waste disposal techniques, including management of produced water, a component mandatory to hydraulic fracturing operations. Concise and comprehensive, Water-Based Chemicals and Technology for Drilling, Completion, and Workover Fluids details all the necessary educational content and handy references to elevate your well's performance while lowering your environmental impact. - Understand the basics and functions on all water-based fluids for drilling, completion, cementing, and enhanced oil recovery operations - Get up to date with the growing need for water-based fluids in hydraulic fracturing operations including supportive materials such as an index of trade names, acronyms, and chemicals - Stay responsible and know the environmental aspects and current regulations, including disposal and discharge
Download or read book Handbook of Lubrication and Tribology Volume II written by Robert W. Bruce and published by CRC Press. This book was released on 2012-07-06 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the best-selling first edition, the growing price and environmental cost of energy have increased the significance of tribology. Handbook of Lubrication and Tribology, Volume II: Theory and Design, Second Edition demonstrates how the principles of tribology can address cost savings, energy conservation, and environmental pr
Download or read book Fuels and Lubricants Handbook written by and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aviation Fuels written by Bhupendra Khandelwal and published by Academic Press. This book was released on 2021-07-20 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aviation Fuels provides up-to-date data on fuel effects on combustion performance and use of alternative fuels in aircraft. This book covers the latest advances on aviation fuel technologies, including alternative fuels, feedstocks and manufacturing processes, combustion performance, chemical modeling, fuel systems compatibility and the technical and environmental challenges for implementing the use of alternative fuels for aviation. Aviation fuel and combustion researchers, academics, and program managers for aviation technologies will value this comprehensive overview and summary on the present status of aviation fuels. - Presents an overview on all relevant fields of aviation fuels, including production, approval, fuel systems compatibility and combustion (including emissions) - Discusses the environmental impacts and carbon footprint of alternative fuels - Features a chapter on electric flight and hydrogen powered aircraft and how its implementation will impact the aviation industry
Download or read book Natural and Synthetic Waxes written by Ernst J. Krendlinger and published by John Wiley & Sons. This book was released on 2022-10-31 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural and Synthetic Waxes A compilation of all relevant information for the production and use of waxes in technical applications Waxes are among the oldest organic substances used by mankind. Before all others, beeswax is known to have played a role in human history for thousands of years. But over time, many other wax species have been detected and exploited, and prepared for different utilizations. Today, we possess knowledge of a great variety of different types of waxes. Unfortunately, there still is no broadly accepted definition of a wax: for the relatively few wax chemists, waxes are usually defined by their physico-chemical properties more than by their chemical constitution. Waxes are not uniform but oligomeric and polymeric substances, not simply describable with a chemical formula. The realm of waxes encompasses fully or partly natural, refined, partly or fully synthetic products, which can be extended by “wax-like” products which do not fulfil all definition criteria. Waxes are offered in different forms like pellets, granules, powders, or micropowders. Their number of technical applications runs into thousands. However, waxes in most cases are just adjuvants or additives, and with few exceptions like candles not known to a broader public. Only few publications over the last decades tried to present a more comprehensive overview of heir chemistry, chemical composition, their physical and analytical properties, their applications, and their sometimes astonishing history. Based on personal experience and expertise, the authors intend to present an overview on the main classes of waxes, their origin, history, future, and potential fate. Economical aspects like market size and development, ecological impacts and challenges, and regulatory issues are also addressed. Waxes are indispensable products in everyday life and in industry and technology, though mostly not even visible or distinguishable to experts. They deserve more than the role of a “poor cousin” in chemistry and technology.
Download or read book Transportation Research written by Tom V. Mathew and published by Springer Nature. This book was released on 2019-10-24 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 4th Conference of the Transportation Research Group of India. It provides a comprehensive analysis of themes spanning the field of transportation encompassing economics, financial management, social equity, green technologies, operations research, big data analysis, econometrics and structural mechanics. This volume will be of interest to researchers, educators, practitioners, managers, and policy-makers world-wide.
Download or read book Fuel Additives written by Robert D. Tack and published by John Wiley & Sons. This book was released on 2022-06-07 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: FUEL ADDITIVES Explore a complete and insightful review of fuel additives In Fuel Additives: Chemistry and Technology, petroleum industry chemist R. D. Tack delivers a comprehensive and practical exploration of various types of fuel additives, the problems they’re meant to address, what they do, their chemistries and preparations, and a discussion of how they work. The book introduces and summarizes refinery operations to an extent that discussions of fuels in the following chapters become easier to understand. Then follow detailed descriptions of problems that occur for reasons of the ways in which liquid petroleum fuels are transported, stored, and used. In these discussions, their applications to jet fuel, heating oils, gasoline, diesel fuels, and bunker fuels are covered. Fuel Additives: Chemistry and Technology also includes: A thorough overview of fuels, including discussions of refinery operations and processes and the application of fuel additives Aids to the transportation and storage of liquid petroleum fuels: practical discussions of stabilizers against oxidative degradation, drag reducers, static dissipators, anti-foamants, demulsifiers, de-icers, and biocides Comprehensive explorations of fuel detergents, including their chemistries and proposals to their mechanisms of action In-depth examinations of cold flow improvers, with detailed descriptions of the waxing problems that they solve Combustion improvers that improve the efficiencies of fuel combustion in engines, burners, and particulate filters—while also reducing emissions Additives that protect metal surfaces against wear, by providing lubricity, and corrosion Perfect for chemists working in the petroleum industry, Fuel Additives: Chemistry and Technology will also earn a place in the libraries of professionals working in related areas and seeking a quick understanding of topics such as oxidative stability, corrosion, or wax crystallization since 1974.
Download or read book ASTM Standardization News written by American Society for Testing and Materials and published by . This book was released on 2007 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmentally Friendly and Biobased Lubricants written by Brajendra K. Sharma and published by CRC Press. This book was released on 2016-09-19 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Review of Developing Environmentally Friendly Lubricants A push from environmentally savvy consumers along with recent changes in governmental regulations have paved the way for a marketplace of products with high levels of environmental performance. Fueled by the growing demand for biobased lubricants, Environmentally Friendly and Biobased Lubricants highlights the development of environmentally friendly additives that are compatible with environmental regulations and describes the approaches being used in this emerging area. Derived from research topics shared over the years at various technical sessions of the Society of Tribologists and Lubrication Engineers (STLE) Annual Meetings, the book includes a critical assessment of gaps and weaknesses in the field of environmentally friendly fluids and biobased lubricants. Each chapter is written by authors selected from the environmentally friendly fluids and biobased lubricants sessions of STLE and also incorporates input from prominent researchers invited to take part in the book. Expert contributors discuss the control, production, usage, and disposal of lubricants; factor in related policies, laws, and regulations around the world; and include case studies demonstrating the uses and values of commercially viable biobased lubricants. The book is divided into five sections that cover advanced environmentally friendly base oils and feedstocks, biobased hydraulic lubricants and biodegradability, chemically/enzymatically modified environmentally friendly base oils, vegetable oil–based environmentally friendly fluids, and additives for environmentally friendly fluids.
Download or read book Heat Treating 2011 written by ASM Heat Treating Society. Conference and Exposition and published by ASM International. This book was released on 2011-01-01 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Large Turbo Generators written by Isidor Kerszenbaum and published by CRC Press. This book was released on 2016-09-15 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive, ordered relationship between malfunctions and symptoms occurring in large turbogenerators. With this book, the operator and/or engineer in a generating station could identify underlying causes of a developing component degradation or a failure quicker, which could potentially save both time and money and reduce the trial-and-error troubleshooting process. Large turbogenerators are the most important source of electricity. They can be found in thousands of power stations in every country. Forced outages, failures and degradation of these very expensive machines have an enormous aggregate cost to society. As such, any tool that can ameliorate loss of production by shaving time from troubleshooting activities, and avoiding unnecessary costs by detecting and promptly responding to component degradation, represents a step forward.
