Download or read book Fuel Property Estimation and Combustion Process Characterization written by Yen-Hsiung Kiang and published by Academic Press. This book was released on 2018-02-20 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Property Estimation and Combustion Process Characterization is a thorough tool book, which provides readers with the most up-to-date, valuable methodologies to efficiently and cost-effectively attain useful properties of all types of fuels and achieve combustion process characterizations for more efficient design and better operation. Through extensive experience in fuels and combustion, Kiang has developed equations and methodologies that can readily obtain reasonable properties for all types of fuels (including wastes and biomass), which enable him to provide guidance for designers and operators in the combustion field, in order to ensure the design, operation, and diagnostics of all types of combustion systems are of the highest quality and run at optimum efficiency. Written for professionals and researchers in the renewable energy, combustion, chemical, and mechanical engineering fields, the information in this book will equip readers with detailed guidance on how to reliably obtain properties of fuels quickly for the design, operation and diagnostics of combustion systems to achieve highly efficient combustion processes. - Presents models for quick estimation of fuel properties without going through elaborate, costly and time consuming sampling and laboratory testing - Offers methodologies to determine combustion process characteristics for designing and deploying combustion systems - Examines the fundamentals of combustion applied to energy systems, including thermodynamics of traditional and alternative fuels combustion - Presents a fuel property database for over 1400 fuels - Includes descriptive application of big data technology, using dual properties analysis as an example - Provides specific technical solutions for combustion, fuels and waste processing

Download or read book Hazardous Waste Management written by Zarook Shareefdeen and published by Springer Nature. This book was released on 2022-04-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the most current knowledge on hazardous waste management practices. It addresses the rapidly changing advances in waste stream characterization and the discovery of new chemicals – which have led to new hazardous wastes, technological innovation, stringent environmental regulations, changes in transport and dispersion modelling of hazardous pollutants, and new waste management techniques. Hazardous Waste Management: Advances in Chemical and Industrial Waste Treatment and Technologies is an invaluable reference for waste management and treatment professionals, chemical engineers and technicians, medical professionals, and environmental regulators, as well as students taking courses on hazardous waste management, environmental engineering, and environmental science.

Download or read book Proceedings of the 4th International Conference on Industrial Engineering written by Andrey A. Radionov and published by Springer. This book was released on 2018-12-07 with total page 2368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 4th International Conference on Industrial Engineering (ICIE), held in Moscow, Russia in May 2018. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

Download or read book Novel Applications of Chemometrics in Analytical Chemistry and Chemical Process Industry written by Alessandra Biancolillo and published by Frontiers Media SA. This book was released on 2022-06-01 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1993-02 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Combustion Processes written by Sara McAllister and published by Springer Science & Business Media. This book was released on 2011-05-10 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Combustion Processes is designed as a textbook for an upper-division undergraduate and graduate level combustion course in mechanical engineering. The authors focus on the fundamental theory of combustion and provide a simplified discussion of basic combustion parameters and processes such as thermodynamics, chemical kinetics, ignition, diffusion and pre-mixed flames. The text includes exploration of applications, example exercises, suggested homework problems and videos of laboratory demonstrations

Download or read book Fossil Energy Update written by and published by . This book was released on 1981 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Assessment of the National Institute of Standards and Technology Chemical Science and Technology Laboratory written by National Research Council and published by National Academies Press. This book was released on 2007-10-18 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report on the CSTL presents an assessment of the Lab's five divisions, coveringâ€"where appropriateâ€"how well each division addresses national priorities, its impact and level of innovation, its technical merit, and its infrastructure. The report notes that the CSTL is meeting its obligations and its priorities are appropriate and aligned with national priorities.

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Download or read book Emission Control and Fuel Economy written by John H Johnson and published by SAE International. This book was released on 2005-06-27 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emission and fuel economy regulations and standards are compelling manufacturers to build ultra-low emission vehicles. As a result, engineers must develop spark-ignition engines with integrated emission control systems that use reformulated low-sulfur fuel. Emission Control and Fuel Economy for Port and Direct Injected SI Engines is a collection of SAE technical papers that covers the fundamentals of gasoline direct injection (DI) engine emissions and fuel economy, design variable effects on HC emissions, and advanced emission control technology and modeling approaches. All papers contained in this book were selected by an accomplished expert as the best in the field; reprinted in their entirety, they present a pathway to integrated emission control systems that meet 2004-2009 EPA standards for light-duty vehicles.

Download or read book Characterization and Properties of Petroleum Fractions written by M. R. Riazi and published by ASTM International. This book was released on 2005 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last three chapters of this book deal with application of methods presented in previous chapters to estimate various thermodynamic, physical, and transport properties of petroleum fractions. In this chapter, various methods for prediction of physical and thermodynamic properties of pure hydrocarbons and their mixtures, petroleum fractions, crude oils, natural gases, and reservoir fluids are presented. As it was discussed in Chapters 5 and 6, properties of gases may be estimated more accurately than properties of liquids. Theoretical methods of Chapters 5 and 6 for estimation of thermophysical properties generally can be applied to both liquids and gases; however, more accurate properties can be predicted through empirical correlations particularly developed for liquids. When these correlations are developed with some theoretical basis, they are more accurate and have wider range of applications. In this chapter some of these semitheoretical correlations are presented. Methods presented in Chapters 5 and 6 can be used to estimate properties such as density, enthalpy, heat capacity, heat of vaporization, and vapor pressure. Characterization methods of Chapters 2-4 are used to determine the input parameters needed for various predictive methods. One important part of this chapter is prediction of vapor pressure that is needed for vapor-liquid equilibrium calculations of Chapter 9.

Download or read book Chemical Engineering Catalog written by and published by . This book was released on 1918 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The assay and analysis of iron and steel iron ores and fuel written by Thomas Bayley and published by . This book was released on 1884 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design for Innovative Value Towards a Sustainable Society written by Mitsutaka Matsumoto and published by Springer Science & Business Media. This book was released on 2012-04-03 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first EcoDesign International Symposium held in 1999, this symposium has led the research and practices of environmentally conscious design of products, services, manufacturing systems, supply chain, consumption, as well as economics and society. EcoDesign 2011 - the 7th International Symposium on Environmentally Conscious Design and Inverse Manufacturing - was successfully held in the Japanese old capital city of Kyoto, on November 30th – December 2nd, 2011. The subtitle of EcoDesign 2011 is to “design for value innovation towards sustainable society.” During this event, presenters discussed the way to achieve both drastic environmental consciousness and value innovation in order to realise a sustainable society.

Download or read book Medium and Heavy Duty Fuel Efficiency Improvement Program written by and published by . This book was released on 2011 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Photoload Sampling Technique written by Robert E. Keane and published by . This book was released on 2007 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire managers need better estimates of fuel loading so they can more accurately predict the potential fire behavior and effects of alternative fuel and ecosystem restoration treatments. This report presents a new fuel sampling method, called the photoload sampling technique, to quickly and accurately estimate loadings for six common surface fuel components (1 hr, 10 hr, 100 hr, and 1000 hr downed dead woody, shrub, and herbaceous fuels). This technique involves visually comparing fuel conditions in the field with photoload sequences to estimate fuel loadings. Photoload sequences are a series of downward-looking and close-up oblique photographs depicting a sequence of graduated fuel loadings of synthetic fuelbeds for each of the six fuel components. This report contains a set of photoload sequences that describe the range of fuel component loadings for common forest conditions in the northern Rocky Mountains of Montana, USA to estimate fuel loading in the field. A companion publication (RMRS-RP-61CD) details the methods used to create the photoload sequences and presents a comprehensive evaluation of the technique.