Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1985 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1985 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tires and Passenger Vehicle Fuel Economy written by and published by Transportation Research Board. This book was released on 2006 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EPA Publications Bibliography written by United States. Environmental Protection Agency and published by . This book was released on 1985 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effectiveness and Impact of Corporate Average Fuel Economy CAFE Standards written by National Research Council and published by National Academies Press. This book was released on 2002-01-29 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since CAFE standards were established 25 years ago, there have been significant changes in motor vehicle technology, globalization of the industry, the mix and characteristics of vehicle sales, production capacity, and other factors. This volume evaluates the implications of these changes as well as changes anticipated in the next few years, on the need for CAFE, as well as the stringency and/or structure of the CAFE program in future years.
Download or read book Indexes written by United States. Environmental Protection Agency and published by . This book was released on 1983 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reducing the Fuel Consumption and Greenhouse Gas Emissions of Medium and Heavy Duty Vehicles Phase Two written by National Research Council and published by National Academies Press. This book was released on 2014-10-02 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medium- and heavy-duty trucks, motor coaches, and transit buses - collectively, "medium- and heavy-duty vehicles", or MHDVs - are used in every sector of the economy. The fuel consumption and greenhouse gas emissions of MHDVs have become a focus of legislative and regulatory action in the past few years. Reducing the Fuel Consumption and Greenhouse Gas Emissions of Medium- and Heavy-Duty Vehicles, Phase Two is a follow-on to the National Research Council's 2010 report, Technologies and Approaches to Reducing the Fuel Consumption of Medium-and Heavy-Duty Vehicles. That report provided a series of findings and recommendations on the development of regulations for reducing fuel consumption of MHDVs. This report comprises the first periodic, five-year follow-on to the 2010 report. Reducing the Fuel Consumption and Greenhouse Gas Emissions of Medium- and Heavy-Duty Vehicles, Phase Two reviews NHTSA fuel consumption regulations and considers the technological, market and regulatory factors that may be of relevance to a revised and updated regulatory regime taking effect for model years 2019-2022. The report analyzes and provides options for improvements to the certification and compliance procedures for medium- and heavy-duty vehicles; reviews an updated analysis of the makeup and characterization of the medium- and heavy-duty truck fleet; examines the barriers to and the potential applications of natural gas in class 2b through class 8 vehicles; and addresses uncertainties and performs sensitivity analyses for the fuel consumption and cost/benefit estimates.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1985 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transportation Weekly Government Abstracts written by and published by . This book was released on 1985 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reducing Fuel Consumption and Greenhouse Gas Emissions of Medium and Heavy Duty Vehicles Phase Two written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-06-15 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medium- and heavy-duty trucks, motor coaches, and transit buses - collectively, "medium- and heavy-duty vehicles", or MHDVs - are used in every sector of the economy. The fuel consumption and greenhouse gas emissions of MHDVs have become a focus of legislative and regulatory action in the past few years. This study is a follow-on to the National Research Council's 2010 report, Technologies and Approaches to Reducing the Fuel Consumption of Medium-and Heavy-Duty Vehicles. That report provided a series of findings and recommendations on the development of regulations for reducing fuel consumption of MHDVs. On September 15, 2011, NHTSA and EPA finalized joint Phase I rules to establish a comprehensive Heavy-Duty National Program to reduce greenhouse gas emissions and fuel consumption for on-road medium- and heavy-duty vehicles. As NHTSA and EPA began working on a second round of standards, the National Academies issued another report, Reducing the Fuel Consumption and Greenhouse Gas Emissions of Medium- and Heavy-Duty Vehicles, Phase Two: First Report, providing recommendations for the Phase II standards. This third and final report focuses on a possible third phase of regulations to be promulgated by these agencies in the next decade.
Download or read book Driving and Engine Cycles written by Evangelos G. Giakoumis and published by Springer. This book was released on 2016-12-09 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents in detail the most important driving and engine cycles used for the certification and testing of new vehicles and engines around the world. It covers chassis and engine-dynamometer cycles for passenger cars, light-duty vans, heavy-duty engines, non-road engines and motorcycles, offering detailed historical information and critical review. The book also provides detailed examples from SI and diesel engines and vehicles operating during various cycles, with a focus on how the engine behaves during transients and how this is reflected in emitted pollutants, CO2 and after-treatment systems operation. It describes the measurement methods for the testing of new vehicles and essential information on the procedure for creating a driving cycle. Lastly, it presents detailed technical specifications on the most important chassis-dynamometer cycles around the world, together with a direct comparison of those cycles.
Download or read book Vehicle Powertrain Systems written by David Crolla and published by John Wiley & Sons. This book was released on 2011-12-30 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: The powertrain is at the heart of vehicle design; the engine – whether it is a conventional, hybrid or electric design – provides the motive power, which is then managed and controlled through the transmission and final drive components. The overall powertrain system therefore defines the dynamic performance and character of the vehicle. The design of the powertrain has conventionally been tackled by analyzing each of the subsystems individually and the individual components, for example, engine, transmission and driveline have received considerable attention in textbooks over the past decades. The key theme of this book is to take a systems approach – to look at the integration of the components so that the whole powertrain system meets the demands of overall energy efficiency and good drivability. Vehicle Powertrain Systems provides a thorough description and analysis of all the powertrain components and then treats them together so that the overall performance of the vehicle can be understood and calculated. The text is well supported by practical problems and worked examples. Extensive use is made of the MATLAB(R) software and many example programmes for vehicle calculations are provided in the text. Key features: Structured approach to explaining the fundamentals of powertrain engineering Integration of powertrain components into overall vehicle design Emphasis on practical vehicle design issues Extensive use of practical problems and worked examples Provision of MATLAB(R) programmes for the reader to use in vehicle performance calculations This comprehensive and integrated analysis of vehicle powertrain engineering provides an invaluable resource for undergraduate and postgraduate automotive engineering students and is a useful reference for practicing engineers in the vehicle industry
Download or read book Introduction to Unmanned Aircraft Systems Second Edition written by Douglas M. Marshall and published by CRC Press. This book was released on 2015-10-26 with total page 1944 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proliferation of technological capability, miniaturization, and demand for aerial intelligence is pushing unmanned aerial systems (UAS) into the realm of a multi-billion dollar industry. This book surveys the UAS landscape from history to future applications. It discusses commercial applications, integration into the national airspace system (NAS), System function, operational procedures, safety concerns, and a host of other relevant topics. The book is dynamic and well-illustrated with separate sections for terminology and web- based resources for further information.
Download or read book EPA Publications Bibliography written by and published by . This book was released on 1984 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Review of the 21st Century Truck Partnership written by National Research Council and published by National Academies Press. This book was released on 2008-10-19 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 21st Century Truck Partnership (21CTP), a cooperative research and development partnership formed by four federal agencies with 15 industrial partners, was launched in the year 2000 with high hopes that it would dramatically advance the technologies used in trucks and buses, yielding a cleaner, safer, more efficient generation of vehicles. Review of the 21st Century Truck Partnership critically examines and comments on the overall adequacy and balance of the 21CTP. The book reviews how well the program has accomplished its goals, evaluates progress in the program, and makes recommendations to improve the likelihood of the Partnership meeting its goals. Key recommendations of the book include that the 21CTP should be continued, but the future program should be revised and better balanced. A clearer goal setting strategy should be developed, and the goals should be clearly stated in measurable engineering terms and reviewed periodically so as to be based on the available funds.
Download or read book Diesel Engine System Design written by Qianfan Xin and published by Elsevier. This book was released on 2011-05-26 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diesel Engine System Design links everything diesel engineers need to know about engine performance and system design in order for them to master all the essential topics quickly and to solve practical design problems. Based on the author's unique experience in the field, it enables engineers to come up with an appropriate specification at an early stage in the product development cycle. - Links everything diesel engineers need to know about engine performance and system design featuring essential topics and techniques to solve practical design problems - Focuses on engine performance and system integration including important approaches for modelling and analysis - Explores fundamental concepts and generic techniques in diesel engine system design incorporating durability, reliability and optimization theories
