Download or read book Fuel Cells Solar Panels and Storage Devices written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2017-12-05 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the materials used for fuel cells, solar panels, and storage devices, such as rechargeable batteries. Fuel cell devices, such as direct methanol fuel cells, direct ethanol fuel cells, direct urea fuel cells, as well as biological fuel cells and the electrolytes, membranes, and catalysts used there are detailed. Separate chapters are devoted to polymer electrode materials and membranes. With regard to solar cells, the types of solar cells are detailed, such as inorganic-organic hybrid solar cells, solar powered biological fuel cells, heterojunction cells, multi-junction cells, and others. Also, the fabrication methods are described. Further, the electrolytes, membranes, and catalysts used there are detailed. The section that is dealing with rechargeable batteries explains the types of rechargeable devices, such as aluminum-based batteries, zinc batteries, magnesium batteries, and lithium batteries. Materials that are used for cathodes, anodes and electrolytes are detailed. The text focuses on the basic issues and also the literature of the past decade. Beyond education, this book may serve the needs of polymer specialists as well as other specialists, e.g., materials scientists, electrochemical engineers, etc., who have only a passing knowledge of these issues, but need to know more.

Download or read book Fuel Cells Solar Panels and Storage Devices written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2017-12-12 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the materials used for fuel cells, solar panels, and storage devices, such as rechargeable batteries. Fuel cell devices, such as direct methanol fuel cells, direct ethanol fuel cells, direct urea fuel cells, as well as biological fuel cells and the electrolytes, membranes, and catalysts used there are detailed. Separate chapters are devoted to polymer electrode materials and membranes. With regard to solar cells, the types of solar cells are detailed, such as inorganic-organic hybrid solar cells, solar powered biological fuel cells, heterojunction cells, multi-junction cells, and others. Also, the fabrication methods are described. Further, the electrolytes, membranes, and catalysts used there are detailed. The section that is dealing with rechargeable batteries explains the types of rechargeable devices, such as aluminum-based batteries, zinc batteries, magnesium batteries, and lithium batteries. Materials that are used for cathodes, anodes and electrolytes are detailed. The text focuses on the basic issues and also the literature of the past decade. Beyond education, this book may serve the needs of polymer specialists as well as other specialists, e.g., materials scientists, electrochemical engineers, etc., who have only a passing knowledge of these issues, but need to know more.

Download or read book Flexible Energy Conversion and Storage Devices written by Chunyi Zhi and published by John Wiley & Sons. This book was released on 2018-06-27 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides in-depth knowledge of flexible energy conversion and storage devices-covering aspects from materials to technologies Written by leading experts on various critical issues in this emerging field, this book reviews the recent progresses on flexible energy conversion and storage devices, such as batteries, supercapacitors, solar cells, and fuel cells. It introduces not only the basic principles and strategies to make a device flexible, but also the applicable materials and technologies, such as polymers, carbon materials, nanotechnologies and textile technologies. It also discusses the perspectives for different devices. Flexible Energy Conversion and Storage Devices contains chapters, which are all written by top researchers who have been actively working in the field to deliver recent advances in areas from materials syntheses, through fundamental principles, to device applications. It covers flexible all-solid state supercapacitors; fiber/yarn based flexible supercapacitors; flexible lithium and sodium ion batteries; flexible diversified and zinc ion batteries; flexible Mg, alkaline, silver-zinc, and lithium sulfur batteries; flexible fuel cells; flexible nanodielectric materials with high permittivity for power energy storage; flexible dye sensitized solar cells; flexible perovskite solar cells; flexible organic solar cells; flexible quantum dot-sensitized solar cells; flexible triboelectric nanogenerators; flexible thermoelectric devices; and flexible electrodes for water-splitting. -Covers the timely and innovative field of flexible devices which are regarded as the next generation of electronic devices -Provides a highly application-oriented approach that covers various flexible devices used for energy conversion and storage -Fosters an understanding of the scientific basis of flexible energy devices, and extends this knowledge to the development, construction, and application of functional energy systems -Stimulates and advances the research and development of this intriguing field Flexible Energy Conversion and Storage Devices is an excellent book for scientists, electrochemists, solid state chemists, solid state physicists, polymer chemists, and electronics engineers.

Download or read book Energy Storage Devices written by M. Taha Demirkan and published by BoD – Books on Demand. This book was released on 2019-12-18 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy storage will be a very important part of the near future, and its effectiveness will be crucial for most future technologies. Energy can be stored in several different ways and these differ in terms of the type and the conversion method of the energy. Among those methods; chemical, mechanical, and thermal energy storage are some of the most favorable methods for containing energy. Current energy storage devices are still far from meeting the demands of new technological developments. Therefore, much effort has been put to improving the performance of different types of energy storage technologies in the last few decades.

Download or read book Electrochemical Technologies for Energy Storage and Conversion written by Jiujun Zhang and published by John Wiley & Sons. This book was released on 2012-03-27 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this handbook and ready reference, editors and authors from academia and industry share their in-depth knowledge of known and novel materials, devices and technologies with the reader. The result is a comprehensive overview of electrochemical energy and conversion methods, including batteries, fuel cells, supercapacitors, hydrogen generation and storage as well as solar energy conversion. Each chapter addresses electrochemical processes, materials, components, degradation mechanisms, device assembly and manufacturing, while also discussing the challenges and perspectives for each energy storage device in question. In addition, two introductory chapters acquaint readers with the fundamentals of energy storage and conversion, and with the general engineering aspects of electrochemical devices. With its uniformly structured, self-contained chapters, this is ideal reading for entrants to the field as well as experienced researchers.

Download or read book Energy Storage written by Robert Huggins and published by Springer. This book was released on 2015-11-13 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Storage explains the underlying scientific and engineering fundamentals of all major energy storage methods. These include the storage of energy as heat, in phase transitions and reversible chemical reactions, and in organic fuels and hydrogen, as well as in mechanical, electrostatic and magnetic systems. Updated coverage of electrochemical storage systems considers exciting developments in materials and methods for applications such as rapid short-term storage in hybrid and intermittent energy generation systems, and battery optimization for increasingly prevalent EV and stop-start automotive technologies. This nuanced coverage of cutting-edge advances is unique in that it does not require prior knowledge of electrochemistry. Traditional and emerging battery systems are explained, including lithium, flow and liquid batteries. Energy Storage provides a comprehensive overview of the concepts, principles and practice of energy storage that is useful to both students and professionals.

Download or read book Energy Conversion and Green Energy Storage written by Amit Soni and published by CRC Press. This book was released on 2022-08-30 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Conversion and Green Energy Storage presents recent developments in renewable energy conversion and green energy storage. Covering technical expansions in renewable energy and applications, energy storage, and solar photovoltaics, the book features chapters written by global experts in the field. Providing insights related to various forms of renewable energy, the book discusses developments in solar photovoltaic applications. The book also includes simulation codes and programs, such as Wien2k code, VASP code, and MATLAB®. The book serves as a useful reference for researchers, graduate students, and engineers in the field of energy.

Download or read book Perovskite based Materials for Energy Storage Devices written by Inamuddin and published by Materials Research Forum LLC. This book was released on 2023-11-05 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perovskite supercapacitors have a promising future in the area of energy storage; due to their superior optoelectronic characteristics, simple device construction and increased efficiency. The book focuses on organic-inorganic perovskite solar cells (PSCs); organometallic halides-based perovskite solar cells (OMHP-SCs); power conversion efficiency (PCE); ferroelectric-based perovskites; recycling of perovskite-based solar cell modules; lead-free perovskite solar cells (PSCs); and inorganic tin perovskite solar cells. Keywords: Energy Storage, Solar Cells, Perovskite Supercapacitors, Organometallic Halides-Based Perovskite, Ferroelectric Materials, Recycling and Recovery of Solar Cells, Lead-Free Perovskite Solar Cells, Organic/Inorganic Based Hybrid Perovskite, Optical Absorption, Charge Transfer, Raw Materials, Optoelectronic Characteristics, Device Construction Procedure, Environmental Instability, Power Conversion Efficiency, Passivation Techniques, Capacitors, Fuel Cells, Toxicity of Lead, Cost Analysis of Recycling, AHP Methodology.

Download or read book Solar Energy Index written by George Machovec and published by Elsevier. This book was released on 2013-10-22 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar Energy Index is an index of resources dealing with solar energy, including archival materials from the International Solar Energy Society collection; references to articles in major solar journals; patents and pamphlets; National Technical Information Service reports; unbound conference proceedings; and other assorted reports. Both theoretical and ""how-to-do-it"" publications are well represented. This book places particular emphasis on terrestrial solar thermal and photovoltaic applications of solar energy. Subjects are classified according to physics, terrestrial wind, collectors, space heating and cooling, economics, materials, distillation, thermal-electric power systems, photoelectricity, solar furnaces, cooking, biological applications, water heaters, photochemistry, energy storage, mechanical devices, evaporation, sea power, space flight applications, and industrial applications. Topics covered range from wind energy and bioconversion to ocean thermal energy conversion, heliohydroelectric power plants, solar cells, turbine generation systems, thermionic converters, batteries and fuel cells, and pumps and engines. This monograph will be of interest to government officials and policymakers concerned with solar energy.

Download or read book Organic electronic devices for solar energy conversion and storage written by Yingzhi Jin and published by Linköping University Electronic Press. This book was released on 2020-08-19 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis focuses on two types of organic electronic devices: organic photovoltaic (OPV) devices for solar energy conversion, and photo-capacitors for energy storage. OPVs have been under the focus of research for decades as an effective technique to convert solar energy to electricity. So far, the efficiency of bulk heterojunction OPV consisting donor and acceptor materials is approaching to 18% with non-fullerene acceptor (NFA), which make it close to commercialization. The process of charge generation and recombination are two competing processes in OPVs, since their requirements for the active layer morphology are contradictory. Large donor/acceptor interfaces facilitate charge generation but hinder the transporting pathways for charge transportation. The simultaneously enhanced charge generation and transportation are achieved by using the ternary strategy in my first paper. The fully mixed donors and NFAs are beneficial for the charge generation and fullerene is introduced as an extra electron transport channel. The hierarchical morphology of the blend film is confirmed by the TEM results. The voltage loss analyses indicate that the hierarchical morphology could suppress unfavorable charge transfer state and non-radiative recombination loss. In my second paper, efficient charge generation with low voltage loss are achieved in the solar cells by rational designing a series of NFAs. The detailed voltage losses are discussed in these binary systems, revealing the critical relationship between radiative efficiency and device performance. To harvest photocurrent in OPVs, long lifetime triplet excitons are highly expected to be good candidates. The potential of triplet materials in OPVs has been explored since 1970s. However, the performance of the triplet materials-based OPVs is far behind. The voltage loss in triplet OPVs is intensively studied in my third work. A higher open circuit voltage (0.88 V) is observed for Ir(FOtbpa)3-based devices than those of Ir(Ftbpa)3 (0.80 V) despite a lower charge transfer state energy. To understand above result, the voltage losses through radiative and non-radiative recombination pathways in two devices are quantitively investigated, which indicate a reduced non-radiative recombination loss in the Ir(FOtbpa)3-based devices. The fluctuation of sun irradiation resulting the unstable output power of solar cells. Therefore, it is important to store electricity of solar cells for later use. Integrated photo-capacitor (IPC), combining a solar cell and a super-capacitor by sharing one common electrode, is able to simultaneously realize the energy harvesting and storage. Building upon this advantage, IPC devices received tremendous research attention. In my fourth and last papers, we introduced super-capacitors to construct IPC devices with OPV device or modules. A free standing thick- PEDOT:PSS film is successfully integrated into an all solution-processed IPC device as the common electrode. Resulting devices demonstrate good performance and outstanding stability. With solar PV modules, a higher voltage can be generated and stored by asymmetric supercapacitors, which could be used as a portable power unit.

Download or read book Energy Harvesting and Storage Devices written by Laxman Raju Thoutam and published by CRC Press. This book was released on 2023-11-29 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the materials, devices, and methodologies that can be used for energy harvesting including advanced materials, devices, and systems. It describes synthesis and fabrication details of energy storage materials. It explains use of high-energy density thin films for future power systems, flexible and biodegradable energy storage devices, fuel cells and supercapacitors, nanogenerators for self-powered systems, and innovative energy harvesting methodologies. Features: Covers all relevant topics in energy harvesting research and focuses on the current state-of-the-art techniques and materials for this application. Showcases the true potential of the nature in energy harvesting industry by discussing various harvesting mechanisms based on renewable and sustainable energy sources. Explains the recent trends in flexible and wearable energy storage devices that are currently being used in IoT-based smart devices. Overviews of the state-of-the-art research performed on design and development of energy harvesting devices. Highlights the interdisciplinary research efforts needed in energy harvesting and storage devices to transform conceptual ideas to working prototypes. This book is aimed at graduate students and researchers in emerging materials, energy engineering, including harvesting and storage.

Download or read book Solar Hydrogen Energy Systems written by Gabriele Zini and published by Springer Science & Business Media. This book was released on 2012-03-15 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is just a matter of time when fossil fuels will become unavailable or uneconomical to retrieve. On top of that, their environmental impact is already too severe. Renewable energy sources can be considered as the most important substitute to fossil energy, since they are inexhaustible and have a very low, if none, impact on the environment. Still, their unevenness and unpredictability are drawbacks that must be dealt with in order to guarantee a reliable and steady energy supply to the final user. Hydrogen can be the answer to these problems. This book presents the readers with the modeling, functioning and implementation of solar hydrogen energy systems, which efficiently combine different technologies to convert, store and use renewable energy. Sources like solar photovoltaic or wind, technologies like electrolysis, fuel cells, traditional and advanced hydrogen storage are discussed and evaluated together with system management and output performance. Examples are also given to show how these systems are capable of providing energy independence from fossil fuels in real life settings.

Download or read book Thin Film Coatings written by Fredrick Madaraka Mwema and published by CRC Press. This book was released on 2022-06-20 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin Film Coatings: Properties, Deposition, and Applications discusses the holistic subject of conventional and emerging thin film technologies without bias to a specific technology based on the existing literature. It covers properties and delves into the various methods of thin film deposition, including the most recent techniques and a direction for future developments. It also discusses the cutting-edge applications of thin film coatings such as self-healing and smart coatings, biomedical, hybrid, and scalable thin films. Finally, the concept of Industry 4.0 in thin film coating technology is examined. This book: Explores a wide range and is not specific to material and method of deposition Demonstrates the application of thin film coatings in nearly all sectors, such as energy and anti-microbial applications Details the preparation and properties of hybrid and scalable (ultra) thin materials for advanced applications Provides detailed bibliometric analyses on applications of thin film coatings Discusses Industry 4.0 and 3D printing in thin film technology With its broad coverage, this comprehensive reference will appeal to a wide audience of materials scientists and engineers and others studying and developing advanced thin film technologies.

Download or read book Energy Storage written by Gerard M Crawley and published by World Scientific. This book was released on 2017-06-19 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Anyone wanting to learn quickly about the latest developments in energy storage should read this book. It provides enough technical depth for the reader to understand the advantages and limitations of the various storage methods, and sufficient references to enable the reader to dig more deeply into the technical details.'IEEE Journals & MagazinesThe subject of energy storage is extremely important for the increased utilization of renewable energies such as solar and wind energy in times when their sources (e.g. the sun and wind) are unavailable. The ability to store energy can also level out the demand curve for electricity and thus lead to a decrease in the peak requirements of energy production. A storage system for ground transportation is also important as a potential replacement for fossil fuel powered transportation.Energy Storage offers a comprehensive look at the possible approaches to energy storage, which are relevant to various situations; from smoothing demand in electrical energy production, applications of energy storage, to transportation. The book covers a variety of approaches to the storage of energy. Beginning with a discussion of the critical importance of energy storage, the book discusses various possible storage options including hydro storage, compressed air energy storage, and electrical and chemical storage in batteries, capacitors and fuel cells. There is also a chapter on the mechanical storage of energy with flywheels using advanced materials. The various applications to power production and transportation are also included. The expertise and active involvement of the authors of the various chapters ensures that the information is reliable, current, and forward looking.

Download or read book Nanostructured Functional and Flexible Materials for Energy Conversion and Storage Systems written by Alagarsamy Pandikumar and published by Elsevier. This book was released on 2020-05-27 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured, Functional, and Flexible Materials for Energy Conversion and Storage Systems gathers and reviews developments within the field of nanostructured functional materials towards energy conversion and storage. Contributions from leading research groups involved in interdisciplinary research in the fields of chemistry, physics and materials science and engineering are presented. Chapters dealing with the development of nanostructured materials for energy conversion processes, including oxygen reduction, methanol oxidation, oxygen evolution, hydrogen evolution, formic acid oxidation and solar cells are discussed. The work concludes with a look at the application of nanostructured functional materials in energy storage system, such as supercapacitors and batteries. With its distinguished international team of expert contributors, this book will be an indispensable tool for anyone involved in the field of energy conversion and storage, including materials engineers, scientists and academics. Covers the importance of energy conversion and storage systems and the application of nanostructured functional materials toward energy-relevant catalytic processes Discusses the basic principles involved in energy conversion and storage systems Presents the role of nanostructured functional materials in the current scenario of energy-related research and development

Download or read book Renewable Energy System Design written by Ziyad Salameh and published by Academic Press. This book was released on 2014-05-12 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The limitation of fossil fuels has challenged scientists and engineers to search for alternative energy resources that can meet future energy demand. Renewable Energy System Design is a valuable reference focusing on engineering, design, and operating principles that engineers can follow in order to successfully design more robust and efficient renewable energy systems. Written by Dr. Ziyad Salameh, an expert with over thirty years of teaching, research, and design experience, Renewable Energy System Design provides readers with the "nuts and bolts" of photovoltaic, wind energy, and hybrid wind/PV systems. It explores renewable energy storage devices with an emphasis on batteries and fuel cells and emerging sustainable technologies like biomass, geothermal power, ocean thermal energy conversion, solar thermal, and satellite power. Renewable Energy System Design is a must-have resource that provides engineers and students with a comprehensive yet practical guide to the characteristics, principles of operation, and power potential of the most prevalent renewable energy systems. Explains and demonstrates design and operating principles for solar, wind, hybrid and emerging systems with diagrams and examples Utilizes case studies to help engineers anticipate and overcome common design challenges Explores renewable energy storage methods particularly batteries and fuel cells and emerging renewable technologies

Download or read book Smart and Flexible Energy Devices written by Ram K. Gupta and published by CRC Press. This book was released on 2022-03-23 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientific community and industry have seen tremendous progress in efficient energy production and storage in the last few years. With the advancement in technology, new devices require high-performance, stretchable, bendable, and twistable energy sources, which can be integrated into next-generation wearable, compact, and portable electronics for medical, military, and civilian applications. Smart and Flexible Energy Devices examines the materials, basic working principles, and state-of-the-art progress of flexible devices like fuel cells, solar cells, batteries, and supercapacitors. Covering the synthesis approaches for advanced energy materials in flexible devices and fabrications and fundamental design concepts of flexible energy devices, such as fuel cells, solar cells, batteries, and supercapacitors, top author teams explore how newer materials with advanced properties are used to fabricate the energy devices to meet the future demand for flexible electronics. Additional features include: • Addressing the materials, technologies, and challenges of various flexible energy devices under one cover • Emphasizing the future demand and challenges of the field • Considering all flexible energy types, such as fuel cells, solar cells, batteries, and supercapacitors • Suitability for undergraduate and postgraduate students of material science and energy programs This is a valuable resource for academics and industry professionals working in the field of energy materials, nanotechnology, and energy devices.