Download or read book Fuel Air Mixing and Flame Structure Measurements for Advance Low Emission Gas Turbine Combustors written by and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A gas turbine combustion facility with optical access was developed which allows the use of laser diagnostic techniques to measure temperature and species concentrations within the combustion zone. The mixing effectiveness of a dual annular counter-rotating swirler premixer was examined using planar laser induced fluorescence (PLIF) of acetone seeded gaseous fuel to provide quantitative maps of the spatial and temporal fuel/air distributions emanating from the premixer. Time averaged results showed maximum spatial variations on the order of 50% of the known overall equivalence ratio. Temporal unmixedness resulted in peak equivalence ratios 2.4 times greater than the overall stoichiometry.
Download or read book Fuel Air Mixing and Flame Structure Measurements for Advanced Low Emission Gas Turbine Combustors written by and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study of the fuel/air mixing and combustion processes downstream of a dual-annular counter-rotating swirler premixer was conducted. A brief description of the facility and results from planar laser-induced fluorescence (PLIF) OH experiments and emission measurements are included in this report. OH images show a fluctuating flame dominated by large-scale structures. The flame is anchored at the edge of the premixing duct exit in the region shown in previous mixing studies to possess fuel concentrations well above the overall equivalence ratio. The area near the center of the exit of the premixer duct is almost completely devoid of reaction. Emissions measurements of NOx, CO, and UHC were also performed. NOx emissions decrease approximately 60% as equivalence ratio is decreased from 0.7 to 0.6, attributable to decreased combustion temperatures. Though combustion temperatures increase slightly for higher pressure drop conditions, NOx emissions remain constant, likely due to decreased residence times and improved mixing for the higher pressure drops. CO emissions increase with both equivalence ratio and pressure drop. In addition to OH imaging and emission measurements, coherent anti-Stokes Raman scattering measurements have been used to quantify combustion temperature fluctuations.
Download or read book Analysis of Fuel Vaporization Fuel Air Mixing and Combustion in Integrated Mixer Flame Holders written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-27 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Requirements to limit pollutant emissions from the gas turbine engines for the future High-Speed Civil Transport (HSCT) have led to consideration of various low-emission combustor concepts. One such concept is the Integrated Mixer-Flame Holder (IMFH). This report describes a series of IMFH analyses performed with KIVA-II, a multi-dimensional CFD code for problems involving sprays, turbulence, and combustion. To meet the needs of this study, KIVA-II's boundary condition and chemistry treatments are modified. The study itself examines the relationships between fuel vaporization, fuel-air mixing, and combustion. Parameters being considered include: mixer tube diameter, mixer tube length, mixer tube geometry (converging-diverging versus straight walls), air inlet velocity, air inlet swirl angle, secondary air injection (dilution holes), fuel injection velocity, fuel injection angle, number of fuel injection ports, fuel spray cone angle, and fuel droplet size. Cases are run with and without combustion to examine the variations in fuel-air mixing and potential for flashback due to the above parameters. The degree of fuel-air mixing is judged by comparing average, minimum, and maximum fuel/air ratios at the exit of the mixer tube, while flame stability is monitored by following the location of the flame front as the solution progresses from ignition to steady state. Results indicate that fuel-air mixing can be enhanced by a variety of means, the best being a combination of air inlet swirl and a converging-diverging mixer tube geometry. With the IMFH configuration utilized in the present study, flashback becomes more common as the mixer tube diameter is increased and is instigated by disturbances associated with the dilution hole flow.Deur, J. M. and Cline, M. C.Glenn Research CenterGAS TURBINE ENGINES; FLAME HOLDERS; VAPORIZING; COMBUSTION; COMPUTATIONAL FLUID DYNAMICS; MIXERS; FUEL INJECTION; CONVERGENT-DIVERGENT NOZZLES; COMBUSTION CHAMBERS; FLAME PROPAGATION; FUEL SPRAY...
Download or read book Gas Turbine Emissions written by Timothy C. Lieuwen and published by Cambridge University Press. This book was released on 2013-07-08 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of clean, sustainable energy systems is a preeminent issue in our time. Gas turbines will continue to be important combustion-based energy conversion devices for many decades to come, used for aircraft propulsion, ground-based power generation, and mechanical-drive applications. This book compiles the key scientific and technological knowledge associated with gas turbine emissions into a single authoritative source.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Advanced Turbulent Combustion Physics and Applications written by N. Swaminathan and published by Cambridge University Press. This book was released on 2022-01-06 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore a thorough and up to date overview of the current knowledge, developments and outstanding challenges in turbulent combustion and application. The balance among various renewable and combustion technologies are surveyed, and numerical and experimental tools are discussed along with recent advances. Covers combustion of gaseous, liquid and solid fuels and subsonic and supersonic flows. This detailed insight into the turbulence-combustion coupling with turbulence and other physical aspects, shared by a number of the world leading experts in the field, makes this an excellent reference for graduate students, researchers and practitioners in the field.
Download or read book Combustion in Advanced Gas Turbine Systems written by I. E. Smith and published by Elsevier. This book was released on 2014-05-17 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cranfield International Symposium Series, Volume 10: Combustion in Advanced Gas Turbine Systems covers the proceedings of an International Propulsion Symposium, held at the College of Aeronautics in Cranfield in April 1967. The book focuses on the processes, methodologies, reactions, and transformations involved in chemical combustion. The selection first takes a look at the design considerations in advanced gas turbine combustion chambers, combustion in industrial gas turbines, and combustion development on the Rolls-Royce Spey engine. Discussions focus on mechanical condition, carbon-formation and exhaust smoke, system requirements, fuel oil ash deposition and corrosion, combustion-system design, performance requirements, types of primary zone, fuel injection, and combustion chamber types. The text then examines subsonic flow flameholder studies using a low pressure simulation technique; stabilization of hydrogen diffusion flames by flame-holders in supersonic flow at low stagnation temperatures; and augmentation systems for turbofan engines. The book takes a look at a consideration of the possible use of refractory ceramic materials for advanced combustion chamber design; cooling of flame tubes by steam injection; and combustion problems in the massive steam injection gas turbine. The selection is a valuable source of information for researchers interested in the process of combustion in advanced gas turbine systems.
Download or read book Combustion Measurements written by Norman Chigier and published by CRC Press. This book was released on 1991-04-01 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an introduction to the general problems of making measurements in high temperature and a presentation of chemically reacting flow systems. It describes each instrument with the various diagnostic techniques and discusses measurements that have been made in furnaces, flames, and rocket engines. The detailed measurement techniques described in this book cover a wide spectrum of applications in combustion systems, including gas turbine, rocket measurement techniques that were developed in laboratories. Information obtained on detailed temperature, velocity, particle size, and gas concentration distribution is leading to improve understanding of the chemical combustion process and to design imporvements in combustors.
Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything you wanted to know about industrial gas turbines for electric power generation in one source with hard-to-find, hands-on technical information.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1994 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Sensors and Monitors for Process Industries and the Environment written by Wim Adrianus De Groot and published by SPIE-International Society for Optical Engineering. This book was released on 1999 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at the Industrial and Environmental Monitors and Biosensors Symposium, January 1999. The eight sessions focused on subjects such as optical monitoring and control for process industries, emerging sensor technology, and environmental monitoring.
Download or read book Advanced Combustion Technologies for Low Carbon Emissions written by Jun Li and published by Frontiers Media SA. This book was released on 2023-07-10 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fossil Energy Update written by and published by . This book was released on 1978 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emissions and Stability of Gas Turbine Combustors with Rapid Fuel and Air Mixing written by Naman Ahmad Al-Dabbagh and published by . This book was released on 1982 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt:
