Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Diesel Combustion and Emissions written by Society of Automotive Engineers and published by . This book was released on 1981 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion for Power Generation and Transportation written by Avinash Kumar Agarwal and published by Springer. This book was released on 2017-01-20 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research monograph presents both fundamental science and applied innovations on several key and emerging technologies involving fossil and alternate fuel utilization in power and transport sectors from renowned experts in the field. Some of the topics covered include: autoignition in laminar and turbulent nonpremixed flames; Langevin simulation of turbulent combustion; lean blowout (LBO) prediction through symbolic time series analysis; lasers and optical diagnostics for next generation IC engine development; exergy destruction study on small DI diesel engine; and gasoline direct injection. The book includes a chapter on carbon sequestration and optimization of enhanced oil and gas recovery. The contents of this book will be useful to researchers and professionals working on all aspects on combustion.
Download or read book Highway Safety Literature written by and published by . This book was released on 1980 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Combustion Science written by Tsuneo Someya and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-uniform combustion, as encountered in diesel and gas turbine engines, furnaces, and boilers, is responsible for the conversion of fossil fuel to energy and also for the corresponding formation of pollutants. In spite of great research efforts in the past, the mechanism of non-uniform combustion has remained less explored than that of other combustion types, since it consists of many, mostly transient processes which influence each other. In view of this background, a group research project, "Exploration of Combustion Mechanism", was established to explore the mechanism of combustion, especially that of diffusive combustion, and also to find efficient ways to control the combustion process for better utilization of fuel and the reduction of pollutant emission. The group research was started, after preparatory activity of 2 years, in April 1988, for a period of 3 years, as a project with a Grant-in-Aid for Scientific Research of Priority Area subsidized by the Ministry of Education, Science and Culture of Japan. The entire group of 43 members was set up as an organizing committee of 13 members, and five research groups, consisting of 36 members. The research groups were: (1) Steady combustion, (2) Unsteady spray combustion, (3) Control of combustion, (4) Chemistry of combustion, and (5) Effects of fuels. At the beginning of the project it was agreed that we should pursue the mechanism of combustion from a scientific viewpoint, namely, the target of the project was to obtain the fundamentals, or "know why", rather than "know how" of combustion.
Download or read book Proceedings of the Fall Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Technical Conference and published by . This book was released on 2007 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biojet Fuel in Aviation Applications written by Cheng Tung Chong and published by Elsevier. This book was released on 2021-06-27 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biojet fuels have the potential to make an important contribution towards decarbonising the aviation sector. Biojet Fuel in Aviation Applications: Production, Usage and Impact of Biofuels covers all aspects of this sustainable aviation fuel including aviation biofuel public policies, production technologies, physico-chemical properties, combustion performances, techno-economics of sustainable fuel production, sustainability and energywater-food (EWF) nexus. This must-have book also charts the current state of the industry by discussing the relevant industry players who are currently producing alternative aviation fuels and flight tests, while also providing a glimpse of the future of the industry. This comprehensive book is written for undergraduate students, postgraduate students, researchers, engineers and policy makers wanting to build up knowledge in the specific area of biojet fuel or the broader fields of sustainable energy and aeronautics. - Reviews major aviation and biojet fuel policies, legislations, initiatives and roadmaps around the world - Features existing and emerging biojet fuel production pathways from various feedstocks - Highlights the key properties of biojet fuels that ensures inter-operability with conventional jet aviation fuel - Discusses the economic aspects of the biojet fuel industry and the barriers preventing its commercialisation - Examines the sustainability of biojet fuel from a life cycle assessment, energy balance and EWF nexus point of views
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Combustion Phenomena written by Jozef Jarosinski and published by CRC Press. This book was released on 2009-02-12 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively using experimental and numerical illustrations, CombustionPhenomena: Selected Mechanisms of Flame Formation, Propagation, and Extinction provides a comprehensive survey of the fundamental processes of flame formation, propagation, and extinction. Taking you through the stages of combustion, leading experts visually display, mathematically explain, and clearly theorize on important physical topics of combustion. After a historical introduction to the field, they discuss combustion chemistry, flammability limits, and spark ignition. They also study counterflow twin-flame configuration, flame in a vortex core, the propagation characteristics of edge flames, instabilities, and tulip flames. In addition, the book describes flame extinction in narrow channels, global quenching of premixed flames by turbulence, counterflow premixed flame extinction limits, the interaction of flames with fluids in rotating vessels, and turbulent flames. The final chapter explores diffusion flames as well as combustion in spark- and compression-ignition engines. It also examines the transition from deflagration to detonation, along with the detonation wave structure. With downloadable resources of images that beautifully illustrate a range of combustion phenomena, this book facilitates a practical understanding of the processes occurring in the conception, spread, and extinguishment of a flame. It will help you on your way to finding solutions to real issues encountered in transportation, power generation, industrial processes, chemical engineering, and fire and explosion hazards.
Download or read book S A E Transactions written by Society of Automotive Engineers and published by . This book was released on 1982 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning in 1985, one section is devoted to a special topic
Download or read book Diesel Emissions and Their Control written by Magdi K Khair and published by SAE International. This book was released on 2006-12-01 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will assist readers in meeting today's tough challenges of improving diesel engine emissions, diesel efficiency, and public perception of the diesel engine. It can be used as an introductory text, while at the same time providing practical information that will be useful for experienced readers. This comprehensive book is well illustrated with more than 560 figures and 80 tables. Each main section is broken down into chapters that offer more specific and extensive information on current issues, as well as answers to technical questions.
Download or read book Materials Industrial and Manufacturing Engineering Research Advances 1 1 written by Denni Kurniawan and published by Trans Tech Publications Ltd. This book was released on 2013-12-04 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2013), December 4 – 6, 2013, Johor Bahru, Malaysia
Download or read book Engine Combustion Instrumentation and Diagnostics written by Hua Zhao and published by SAE International. This book was released on 2001-01-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete description of instrumentation and in-cylinder measurement techniques for internal combustion engines. Written primarily for researchers and engineers involved in advanced research and development of internal combustion engines, the book provides an introduction to the instrumentation and experimental techniques, with particular emphasis on diagnostic techniques for in-cylinder measurements.
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2006 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomization and Sprays written by Arthur Lefebvre and published by CRC Press. This book was released on 1988-12-01 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomization and Sprays examines the atomization of liquids and characteristics of sprays. It explains the physical processes of atomization as well as guidelines for designing atomizers. In addition, it demonstrates how the importance of the size and velocity of a particle contributes to improved spray characterization. Coverage includes general co
Download or read book Automotive Engineering written by and published by . This book was released on 1920 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Joint Meeting of the U S Sections of the Combustion Institute Western States Central States Eastern States written by and published by . This book was released on 2005 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
