Download or read book Fretting Corrosion written by Raymond H. Comyn and published by . This book was released on 1963 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data from over 200 reports from the English literature on fretting corrosion were summarized for ready reference--for engineers who must consider its effect in designing mechanical and electrical devices and for scientists who may wish to investigate the underlying mechanism. The actual wear, frictional changes, variations in electrical resistances and electrical noise, and fatigue due to fretting are described to acquaint the designer with difficulties to be anticipated from this problem. Factors affecting fretting, its effect on the fatigue strength of materials and methods of preventing it are discussed. The main theories that have been proposed to explain fretting corrosion and test methods that have been used to study it are reviewed. (Author).

Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.

Download or read book Corrosion Tests and Standards written by Robert Baboian and published by ASTM International. This book was released on 2005 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials Evaluation Under Fretting Conditions written by S. R. Brown and published by ASTM International. This book was released on 1982 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Istfa 2005 written by ASM International and published by ASM International. This book was released on 2005-01-01 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Symposium on Fretting Corrosion written by ASTM International and published by . This book was released on 1952-01-01 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Encyclopedia Of Corrosion Technology written by Philip A. Schweitzer, P.E. and published by CRC Press. This book was released on 2004-03-17 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRINT/ONLINE PRICING OPTIONS AVAILABLE UPON REQUEST AT [email protected]

Download or read book Symposium on Fretting Corrosion written by American Society for Testing Materials and published by . This book was released on 1953 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Symposium on Fretting Corrosion written by and published by . This book was released on 1953 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tribocorrosion of Passive Metals and Coatings written by D Landolt and published by Elsevier. This book was released on 2011-10-12 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribocorrosion causes the degradation or alteration of materials through the combined action of corrosion and wear. It limits the performance and life-time of installations, machines and devices with moving parts, and controls certain manufacturing processes such as chemical–mechanical polishing. The effects of tribocorrosion are most pronounced on passive metals which owe their corrosion resistance to a thin protecting oxide film. Most corrosion-resistant engineering alloys belong to this category.This book provides an introduction to the developing field of tribocorrosion and an overview of the latest research. Part one reviews basic notions of corrosion and tribology, before presenting the most recent results on the growth and structure of passive oxide films. Tribocorrosion mechanisms under fretting, sliding and erosion conditions, respectively, are then discussed. Part two focuses on methods for measuring and preventing tribocorrosion. It includes chapters on electrochemical techniques, the design of tribocorrosion test equipment, data evaluation and the optimisation of materials' properties for tribocorrosion systems. Part three presents a selection of tribocorrosion problems in engineering and medicine. Three chapters address the tribocorrosion of medical implants including test methods and clinical implications. Other chapters examine tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits, elevated-temperature metal working and chemical–mechanical polishing.With its distinguished editors and international team of expert contributors Tribocorrosion of passive metals and coatings is an invaluable reference tool for engineers and researchers in industry and academia confronted with tribocorrosion problems. - Comprehensively reviews current research on the tribocorrosion of passive metals and coatings, with particular reference to the design of tribocorrosion test equipment, data evaluation and the optimisation of materials' properties for tribocorrosion systems - Chapters discuss tribocorrosion mechanisms under fretting, sliding and erosion conditions before focussing on methods for measuring and preventing tribocorrosion - Includes a comprehensive selection of tribocorrosion problems in engineering and medicine, such as the tribocorrosion of medical implants, and tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits and elevated-temperature metal working

Download or read book Electrical Contacts written by Paul G. Slade and published by CRC Press. This book was released on 1999-03-31 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the choice, attachment, and testing of contact materials, Electrical Contacts introduces a thorough discussion on making electric contact and contact interface conduction, presents a general outline of, and measurement techniques for, important corrosion mechanisms, discusses the results of contact wear when plug-in connections are made and broken, investigates the effect of thin noble metal plating on electronic connections, relates crucial considerations for making high- and low-power contact joints, details arcing effects on contacts including contact erosion, welding, and contamination, and contains nearly 2800 references, tables, equations, drawings, and photographs.

Download or read book Investigation of Fretting Corrosion by Microscopic Observation written by Douglas Godfrey and published by . This book was released on 1950 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fretting corrosion was concluded to be caused by the removal of finely divided and apparently virgin material due to inherent forces and that its primary reaction is independent of of vibratory motion or high sliding speeds. Fretting corrosion occurred to clean nonmetals and metals readily and glass microscope slides and steel balls provided an excellent method for visual studies.

Download or read book Introduction to Corrosion Science written by E. McCafferty and published by Springer Science & Business Media. This book was released on 2010-01-04 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for a one-semester course in corrosion science at the graduate or advanced undergraduate level. The approach is that of a physical chemist or materials scientist, and the text is geared toward students of chemistry, materials science, and engineering. This textbook should also be useful to practicing corrosion engineers or materials engineers who wish to enhance their understanding of the fundamental principles of corrosion science. It is assumed that the student or reader does not have a background in electrochemistry. However, the student or reader should have taken at least an undergraduate course in materials science or physical chemistry. More material is presented in the textbook than can be covered in a one-semester course, so the book is intended for both the classroom and as a source book for further use. This book grew out of classroom lectures which the author presented between 1982 and the present while a professorial lecturer at George Washington University, Washington, DC, where he organized and taught a graduate course on “Environmental Effects on Materials.” Additional material has been provided by over 30 years of experience in corrosion research, largely at the Naval Research Laboratory, Washington, DC and also at the Bethlehem Steel Company, Bethlehem, PA and as a Robert A. Welch Postdoctoral Fellow at the University of Texas. The text emphasizes basic principles of corrosion science which underpin extensions to practice.

Download or read book Corrosion of Aluminium written by Christian Vargel and published by Elsevier. This book was released on 2004-10-02 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of Aluminium highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references. In addition to that, the first chapter allows the reader who is not very familiar with aluminium to understand the metallurgical, chemical and physical features of the aluminium alloys. The author Christian Vargel, has adopted a practitioner approach, based on the expertise and experience gained from a 40 year career in aluminium corrosion This approach is most suitable for assessing the corrosion resistance of aluminium- an assessment which is one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission etc. - 600 bibliographic references provide a comprehensive guide to over 100 years of related study - Providing practical applications to the reader across many industries - Accessible to both the beginner and the expert

Download or read book Corrosion for Everybody written by Alec Groysman and published by Springer Science & Business Media. This book was released on 2009-11-21 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: People seldom enjoy corrosion. They usually perceive it as a nasty phenomenon with which they must cope. Yet many people, far from the corrosion field, come across it because of their professional duty. Lawyers, historians, doctors, architects, philosophers, artists, and archeologists, to name a few, may want or need to understand the principles of corrosion. This volume explains this important topic in a lucid, interesting, and popular form to everybody: to students and young engineers who are only beginning their studies, to scientists and engineers who have dealt with corrosion for many years, and to non-specialists involved in corrosion problems. The book uses a fresh writing style, with some new explanations relating to thermodynamics of oxidation of iron and mild steels in water, reversible and irreversible potential, solubility of oxygen in water and aqueous solutions of electrolytes, corrosion of metals in fuels, corrosion of storage tanks for fuels and their corrosion control, corrosion monitoring in practice, humanitarian aspects of corrosion science and technology (history of the evolution of knowledge about corrosion, relationships between corrosion and philosophy, corrosion and art). Many practical examples of various corrosion phenomena are given.

Download or read book Corrosion Control written by S. Bradford and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human beings undoubtedly became aware of corrosion just after they made their first metals. These people probably began to control corrosion very so on after that by trying to keep metal away from corrosive environments. "Bring your tools in out of the rain" and "Clean the blood off your sword right after battle" would have been early maxims. Now that the mechanisms of corrosion are better understood, more techniques have been developed to control it. My corrosion experience extends over 10 years in industry and research and over 20 years teaching corrosion courses to university engineering students and industrial consulting. During that time I have developed an approach to corrosion that has successfully trained over 1500 engineers. This book treats corrosion and high-temperature oxidation separately. Corrosion is divided into three groups: (1) chemical dissolution including uniform attack, (2) electrochemical corrosion from either metallurgicalor environmental cells, and (3) corrosive-mechanical interactions. It seems more logical to group corrosion according to mechanisms than to arbitrarily separate them into 8 or 20 different types of corrosion as if they were unrelated. University students and industry personnel alike generally are afraid of chemistry and consequently approach corrosion theory very hesitantly. In this text the electrochemical reactions responsible for corrosion are summed up in only five simple half-cell reactions. When these are combined on a polarization diagram, which is explained in detail, the electrochemical pro cesses become obvious.

Download or read book Fretting Wear and Fretting Fatigue written by Tomasz Liskiewicz and published by Elsevier. This book was released on 2022-12-07 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fretting Wear and Fretting Fatigue: Fundamental Principles and Applications takes a combined mechanics and materials approach, providing readers with a fundamental understanding of fretting phenomena, related modeling and experimentation techniques, methods for mitigation, and robust examples of practical applications across an array of engineering disciplines. Sections cover the underpinning theories of fretting wear and fretting fatigue, delve into experimentation and modeling methods, and cover a broad array of applications of fretting fatigue and fretting wear, looking at its impacts in medical implants, suspension ropes, bearings, heating exchangers, electrical connectors, and more. - Covers theoretical fundamentals, modeling and experimentation techniques, and applications of fretting wear and fatigue - Takes a combined mechanics and materials approach - Discusses the differences and similarities between fretting wear and fretting fatigue as well as combined experimental and modeling methods - Covers applications including medical implants, heat exchangers, bearings, automotive components, gas turbines, and more