Download or read book Fractional Linear Systems and Electrical Circuits written by Tadeusz Kaczorek and published by Springer. This book was released on 2014-10-13 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph covers some selected problems of positive and fractional electrical circuits composed of resistors, coils, capacitors and voltage (current) sources. The book consists of 8 chapters, 4 appendices and a list of references. Chapter 1 is devoted to fractional standard and positive continuous-time and discrete-time linear systems without and with delays. In chapter 2 the standard and positive fractional electrical circuits are considered and the fractional electrical circuits in transient states are analyzed. Descriptor linear electrical circuits and their properties are investigated in chapter 3, while chapter 4 is devoted to the stability of fractional standard and positive linear electrical circuits. The reachability, observability and reconstructability of fractional positive electrical circuits and their decoupling zeros are analyzed in chapter 5. The fractional linear electrical circuits with feedbacks are considered in chapter 6. In chapter 7 solutions of minimum energy control for standard and fractional systems with and without bounded inputs is presented. In chapter 8 the fractional continuous-time 2D linear systems described by the Roesser type models are investigated.
Download or read book Fractional Order Electrical Circuit Theory written by Bo Zhang and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a concise and insightful view of the knowledge on fractional-order electrical circuits, which belongs to the subject of Electric Engineering and involves mathematics of fractional calculus. It offers an overview of fractional calculus and then describes and analyzes the basic theories and properties of fractional-order elements and fractional-order electrical circuit composed of fractional-order elements. Therein, the fundamental theorems, time-domain analysis, steady-state analysis, complex frequency domain analysis and state variable analysis of fractional-order electrical circuit are included. The fractional-order two-port networks and generalized fractional-order linear electrical circuits are also mentioned. Therefore, this book provides readers with enough background and understanding to go deeper into the topic of fractional-order electrical circuit, so that it is useful as a textbook for courses related to fractional-order elements, fractional-order electrical circuits, etc. This book is intended for students without an extensive mathematical background and is suitable for advanced undergraduate and graduate students, engineers and researchers who focus on the fractional-order elements, electrical circuits and systems. .
Download or read book Electrical Circuits in Biomedical Engineering written by Ali Ümit Keskin and published by Springer. This book was released on 2017-05-03 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive and in-depth analysis of electrical circuit theory in biomedical engineering, ideally suited as textbook for a graduate course. It contains methods and theory, but the topical focus is placed on practical applications of circuit theory, including problems, solutions and case studies. The target audience comprises graduate students and researchers and experts in electrical engineering who intend to embark on biomedical applications.
Download or read book Fractional Order Systems written by Ahmad Taher Azar and published by Academic Press. This book was released on 2018-08-16 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractional Order Systems: Optimization, Control, Circuit Realizations and Applications consists of 21 contributed chapters by subject experts. Chapters offer practical solutions and novel methods for recent research problems in the multidisciplinary applications of fractional order systems, such as FPGA, circuits, memristors, control algorithms, photovoltaic systems, robot manipulators, oscillators, etc. This book is ideal for researchers working in the modeling and applications of both continuous-time and discrete-time dynamics and chaotic systems. Researchers from academia and industry who are working in research areas such as control engineering, electrical engineering, mechanical engineering, computer science, and information technology will find the book most informative. - Discusses multi-disciplinary applications with new fundamentals, modeling, analysis, design, realization and experimental results - Includes new circuits and systems based on the new nonlinear elements - Covers most of the linear and nonlinear fractional-order theorems that will solve many scientific issues for researchers - Closes the gap between theoretical approaches and real-world applications - Provides MATLAB® and Simulink code for many of the applications in the book
Download or read book Fractional Order Design written by Ahmed G. Radwan and published by Academic Press. This book was released on 2021-10-22 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractional-Order Design: Devices, Circuits, and Systems introduces applications from the design perspective so that the reader can learn about, and get ready to, design these applications. The book also includes the different techniques employed to comprehensively and straightforwardly design fractional-order systems/devices. Furthermore, a lot of mathematics is available in the literature for solving the fractional-order calculus for system application. However, a small portion is employed in the design of fractional-order systems. This book introduces the mathematics that has been employed explicitly for fractional-order systems. Students and scholars who wants to quickly understand the field of fractional-order systems and contribute to its different domains and applications will find this book a welcomed resource. - Presents a simple and comprehensive understanding of the field of fractional-order systems - Offers practical knowledge on the design of fractional-order systems for different applications - Exposes users to the possible new areas of applications of fractional-order systems
Download or read book Automation 2019 written by Roman Szewczyk and published by Springer. This book was released on 2019-02-16 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers presented at AUTOMATION2019, an international conference held in Warsaw from March 27 to 29, 2019. It discusses the radical technological changes occurring due to the INDUSTRY 4.0. To follow these changes, both scientists and engineers have to face the challenge of interdisciplinary approach directed at the development of cyber-physical systems. This approach encompasses interdisciplinary theoretical knowledge, numerical modelling and simulation as well as application of artificial intelligence techniques. Both software and physical devices are composed into systems that will increase production efficiency and resource savings. The theoretical results, practical solutions and guidelines presented are valuable for both researchers working in the area of engineering sciences and practitioners looking for solutions to industrial problems.
Download or read book Positive 1D and 2D Systems written by Tadeusz Kaczorek and published by Springer Science & Business Media. This book was released on 2002 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is devoted to the positive multivariable 1D and 2D linear, time-invariant, finite-dimensional system. The book is based on the author's lectures for Ph.D. students, delivered at Warsaw University of Technology in the academic year 1999/2000. The book consists of two parts; the first part is devoted to the 1D positive linear systems and the second to the 2D positive linear systems described by the Rosser model and the Fornasini-Marchesini models. Definitions, basic properties and theorems concerning positive matrices and graphs are presented; the externally and internally positive linear continuous-time and discrete-time linear systems are considered; and the reachability, controlability and observability of positive linear systems are discussed. The realisation problem for positive 1D and 2D systems is also considered, and the 2D models of externally and internally positive and their properties and controllability and minimum energy control of positive 2D systems are investigated.
Download or read book New Trends in Fractional Differential Equations with Real World Applications in Physics written by Jagdev Singh and published by Frontiers Media SA. This book was released on 2020-12-30 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.
Download or read book Design of CMOS Analog Integrated Fractional Order Circuits written by Georgia Tsirimokou and published by Springer. This book was released on 2017-04-12 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the design and realization of analog fractional-order circuits, which are suitable for on-chip implementation, capable of low-voltage operation and electronic adjustment of their characteristics. The authors provide a brief introduction to fractional-order calculus, followed by design issues for fractional-order circuits of various orders and types. The benefits of this approach are demonstrated with current-mode and voltage-mode filter designs. Electronically tunable emulators of fractional-order capacitors and inductors are presented, where the behavior of the corresponding chips fabricated using the AMS 0.35um CMOS process has been experimentally verified. Applications of fractional-order circuits are demonstrated, including a pre-processing stage suitable for the implementation of the Pan-Tompkins algorithm for detecting the QRS complexes of an electrocardiogram (ECG), a fully tunable implementation of the Cole-Cole model used for the modeling of biological tissues, and a simple, non-impedance based measuring technique for super-capacitors.
Download or read book Fractional Dynamical Systems Methods Algorithms and Applications written by Piotr Kulczycki and published by Springer Nature. This book was released on 2022-01-04 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a wide and comprehensive spectrum of issues and problems related to fractional-order dynamical systems. It is meant to be a full-fledge, comprehensive presentation of many aspects related to the broadly perceived fractional-order dynamical systems which constitute an extension of the traditional integer-order-type descriptions. This implies far-reaching consequences, both analytic and algorithmic, because—in general—properties of the traditional integer-order systems cannot be directly extended by a straightforward generalization to fractional-order systems, modeled by fractional-order differential equations involving derivatives of an non-integer order. This can be useful for describing and analyzing, for instance, anomalies in the behavior of various systems, chaotic behavior, etc. The book contains both analytic contributions with state-of-the-art and theoretical foundations, algorithmic implementation of tools and techniques, and—finally—some examples of relevant and successful practical applications.
Download or read book Automation 2021 Recent Achievements in Automation Robotics and Measurement Techniques written by Roman Szewczyk and published by Springer Nature. This book was released on 2021-04-29 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 38 papers authored by both scientists and practitioners focused on an interdisciplinary approach to the development of cyber-physical systems. Recently our civilization has been facing one of the most severe challenges in modern history. The COVID-19 pandemic devastated the global economy and significantly disrupted numerous areas of economic activity. Only radical increase of efficiency and versatility of industrial production, with further limitation of human involvement, paralleled by the decrease of environmental burden, will enable us to cope with such challenges. We hope that the presented book provides input to the solution of at least some problems brought about by this challenge. This approach relies on the development of measuring techniques, robotic and mechatronic systems, industrial automation, numerical modeling and simulation as well as application of artificial intelligence techniques required by the transformation leading to Industry 4.0.
Download or read book Fractional Differential Equations written by Anatoly Kochubei and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-02-19 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-volume handbook is the most up-to-date and comprehensive reference work in the field of fractional calculus and its numerous applications. This second volume collects authoritative chapters covering the mathematical theory of fractional calculus, including ordinary and partial differential equations of fractional order, inverse problems, and evolution equations.
Download or read book Automation 2018 written by Roman Szewczyk and published by Springer. This book was released on 2018-03-07 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers presented at Automation 2018, an international conference held in Warsaw from March 21 to 23, 2018. It discusses the radical technological changes occurring due to the INDUSTRY 4.0, with a focus on offering a better understanding of the Fourth Industrial Revolution. Each chapter presents a detailed analysis of interdisciplinary knowledge, numerical modeling and simulation as well as the application of cyber-physical systems, where information technology and physical devices create synergic systems leading to unprecedented efficiency. The theoretical results, practical solutions and guidelines presented are valuable for both researchers working in the area of engineering sciences and practitioners looking for solutions to industrial problems.
Download or read book Automation 2023 Key Challenges in Automation Robotics and Measurement Techniques written by Roman Szewczyk and published by Springer Nature. This book was released on 2023-02-04 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the results of recent research, which supports the postulated transformation. It contains papers written by both scientists and engineers dealing with diverse aspects of: measuring techniques, robotics, mechatronics systems, control, industrial automation, numerical modelling and simulation as well as application of artificial intelligence techniques required by the transformation of the industry towards the Industry 4.0. We strongly believe that the solutions and guidelines presented in this volume will be useful for both researchers and engineers solving problems that have emerged during the recent crisis.
Download or read book Selected Problems of Fractional Systems Theory written by Tadeusz Kaczorek and published by Springer. This book was released on 2011-05-10 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph covers some selected problems of positive fractional 1D and 2D linear systems. It is an extended and modified English version of its preceding Polish edition published by Technical University of Bialystok in 2009. This book is based on the lectures delivered by the author to the Ph.D. students of the Faculty of Electrical Engineering of Bialystok University of Technology and of Warsaw University of Technology and on invited lectures in several foreign universities in the last three years.
Download or read book Non Integer Order Calculus and its Applications written by Piotr Ostalczyk and published by Springer. This book was released on 2018-03-22 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on fractional calculus, presenting novel advances in both the theory and applications of non-integer order systems. At the end of the twentieth century it was predicted that it would be the calculus of the twenty-first century, and that prophecy is confirmed year after year. Now this mathematical tool is successfully used in a variety of research areas, like engineering (e.g. electrical, mechanical, chemical), dynamical systems modeling, analysis and synthesis (e.g technical, biological, economical) as well as in multidisciplinary areas (e.g. biochemistry, electrochemistry).As well as the mathematical foundations the book concentrates on the technical applications of continuous-time and discrete-time fractional calculus, investigating the identification, analysis and control of electrical circuits and dynamical systems. It also presents the latest results.Although some scientific centers and scientists are skeptical and actively criticize the applicability of fractional calculus, it is worth breaking through the scientific and technological walls. Because the “fractional community” is growing rapidly there is a pressing need for the exchange of scientific results. The book includes papers presented at the 9th International Conference on Non-integer Order Calculus and Its Applications and is divided into three parts:• Mathematical foundations• Fractional systems analysis and synthesis• System modelingSeven papers discuss the mathematical foundations, twelve papers address fractional order analysis and synthesis and three focus on dynamical system modeling by the fractional order differential and difference equations. It is a useful resource for fractional calculus scientific community.
Download or read book Foundations of Analog and Digital Electronic Circuits written by Anant Agarwal and published by Elsevier. This book was released on 2005-07-01 with total page 1009 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike books currently on the market, this book attempts to satisfy two goals: combine circuits and electronics into a single, unified treatment, and establish a strong connection with the contemporary world of digital systems. It will introduce a new way of looking not only at the treatment of circuits, but also at the treatment of introductory coursework in engineering in general. Using the concept of ''abstraction,'' the book attempts to form a bridge between the world of physics and the world of large computer systems. In particular, it attempts to unify electrical engineering and computer science as the art of creating and exploiting successive abstractions to manage the complexity of building useful electrical systems. Computer systems are simply one type of electrical systems.+Balances circuits theory with practical digital electronics applications.+Illustrates concepts with real devices.+Supports the popular circuits and electronics course on the MIT OpenCourse Ware from which professionals worldwide study this new approach.+Written by two educators well known for their innovative teaching and research and their collaboration with industry.+Focuses on contemporary MOS technology.
