Download or read book Foundation and Anchor Design Guide for Metal Building Systems written by Alexander Newman and published by McGraw Hill Professional. This book was released on 2012-09-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEET THE COMPLEX CHALLENGES OF METAL BUILDING SYSTEMS FOUNDATION DESIGN Expand your professional design skills and engineer safe, reliable foundations and anchors for metal building systems. Written by a practicing structural engineer, Foundation and Anchor Design Guide for Metal Building Systems thoroughly covers the entire process--from initial soil investigation through final design and construction. The design of different types of foundations is explained and illustrated with step-by-step examples. The nuts-and-bolts discussion covers the best design and construction practices. This detailed reference book explains how the design of metal building foundations differs from the design of conventional foundations and how to comply with applicable building codes while avoiding common pitfalls. COVERAGE INCLUDES: Metal building and foundation design fundamentals Soil types, properties, and investigation Unique aspects of foundation design for metal building systems Design of isolated column footings Foundation walls and wall footings Tie rods, hairpins, and slab ties Moment-resisting foundations Slab with haunch, trench footings, and mats Deep foundations Anchors in metal building systems Concrete embedments in metal building systems
Download or read book Metal Building Systems Design and Specifications 2 E written by Alexander Newman and published by McGraw Hill Professional. This book was released on 2003-12-11 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Reflects recent changes in the model building codes and in the MBMA (Metal Building Manual Association) manual * New review questions after each chapter * Revised data on insulation necessary to meet the new energy codes * New material on renovations of primary frames, secondary members, roofing, and walls
Download or read book Foundation and Anchor Design Guide for Metal Building Systems written by Alexander Newman and published by McGraw Hill Professional. This book was released on 2013 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide serves as the industry standard for foundation design of metal building systems.
Download or read book Steel and Composite Structures written by Y.C. Wang and published by CRC Press. This book was released on 2003-09-02 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel and Composite Structures: Behaviour and Design for Fire Safety presents a systematic and thorough description of the behaviour of steel and composite structures in fire, and shows how design methods are developed to quantify our understanding. Quantitative descriptions of fire behaviour, heat transfer in construction elements and structural analysis using numerical methods are all addressed and existing codes and standards for steel and composite fire safety design are critically examined. Using a comprehensive and systematic description of structural fire safety engineering principles, the author explains and illustrates the important difference between the behaviour of isolated structural elements and whole structures under fire conditions. This book is a vital source of information to structural and fire engineers. It will also be of considerable interest and value to students and researchers in this field.
Download or read book Parking Structures written by Anthony P. Chrest and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parking Structures provides a single-source reference for parking structure designers, builders, and owners. This third edition is still the only such book. It addresses how to select the best functional and structural designs for a given situation, ensure long-term durability, design for easy maintenance, decide on the number and placement of entrances and exits, design an easily understood wayfinding system, design for ADA compliance, plan for internal auto and pedestrian traffic circulation, select the most effective and energy efficient lighting system, avoid the most common design and construction pitfalls, provide for adequate patron safety and security, carry out needed repairs, and extend the parking structure life. Parking Structures addresses all the major issues related to parking garages. It is an essential reference for parking structure owners, structural engineers, architects, contractors, and other professionals. New in the third edition: This third edition of Parking Structures includes new material on metric dimensions and recommendations for functional design globally, new research on flow capacity and queuing at parking entry/exits, an entirely new chapter on planning for a new parking structure, including cost issues and alternatives to structure construction, pedestrian considerations, safety in parking facilities, plazas above parking structures, an expanded chapter on seismic design, seismic retrofit, life cycle cost analysis, and upgrades to existing structures.
Download or read book Metal Building Systems Design and Specifications 2 E written by Alexander Newman and published by McGraw-Hill Prof Med/Tech. This book was released on 2004 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book from an expert on metal building systems--the first an author unaffiliated with an industry trade group--offers important, valuable, and unbiased information that can save you money and time--and that may even save your building! Full of essential features, tips and advice, this guide goes beyond manufacturer-supplied information to warn you of potential design pitfalls and to point out specific recurring problems and failures of MBS drawn from actual experience. It provides specific help--unavailable elsewhere--with specifying and selecting secondary framing, walls, roofs, and much, much more. This is the one book that is a must-have for any professional involved with pre-engineered buildings.
Download or read book Structural Analysis and Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2016-04-19 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: As software skills rise to the forefront of design concerns, the art of structural conceptualization is often minimized. Structural engineering, however, requires the marriage of artistic and intuitive designs with mathematical accuracy and detail. Computer analysis works to solidify and extend the creative idea or concept that might have started o
Download or read book Metal Building Systems 3E PB written by Alexander Newman and published by McGraw Hill Professional. This book was released on 2014-09-22 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most complete, up-to-date metal building systems guide Fully revised for the latest building codes and industry trends, Metal Building Systems, Third Edition, explains how to select, specify, and design preengineered buildings with confidence. In this book, a practicing structural engineer goes beyond manufacturer-supplied specifications to provide impartial and objective information that can save you money and time. A new chapter on anchor bolts and embedments, many new illustrations, plus new and updated design examples, are included in this practical reference. End-of-chapter review questions reinforce the material presented. This is an essential resource for architects, engineers, construction specifiers, design professionals, facility managers, building officials, and contractors working with metal building systems. COMPREHENSIVE COVERAGE INCLUDES: Structural loads and design methods Structural system selection criteria Primary framing Secondary framing: girts and purlins Metal roofing Wall materials Insulation The process of buying a metal building Common problems and failures Lateral drift and vertical deflections Foundation design Anchor bolts and embedments Current design trends Reroofing and renovations Specifying crane buildings Avoiding construction problems
Download or read book Net Zero Energy Design written by Thomas Hootman and published by John Wiley & Sons. This book was released on 2012-10-15 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conveniently organized and packed with robust technical content and clear explanations of key principles Written by an architect who is the director of sustainability at a global architecture firm, Net Zero Energy Design is a practical guide for architects and related construction professionals who want to design and build net zero energy commercial architecture. It offers no-nonsense strategies, step-by-step technical analysis, and valuable examples, in addition to developed case studies. With a focus on application in a variety of building types and scales, the book also develops a broad-based understanding of all the integrated principles involved in achieving net zero energy. This book is an indispensable resource for anyone venturing into net zero energy design, construction, and operation, and it also serves as an excellent resource on a variety of sustainable design topics. Important features include: Organization based upon the commercial building delivery process Robust technical content for use in actual project applications Analysis examples that demonstrate key technical principles Plenty of design data for use as a valuable design resource Abundant and sophisticated information graphics and color illustrations and photographs A distinct design focus on the content that inspires adoption of principles into projects
Download or read book Failures in Concrete Structures written by Robin Whittle and published by CRC Press. This book was released on 2012-11-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of the author‘s firsthand experience with incidents related to reinforced and prestressed concrete structures, helping readers gain an understanding of errors that can occur in order to avoid making them. He includes mistakes discovered at the design stage, ones that led to failures, and some that involved partial structure collapse all of which required remedial action to ensure safety. The book focuses on specific incidents that occurred at various points in the construction process, including mistakes related to structural misunderstanding, extrapolation of codes of practice, and poor construction.
Download or read book Designing Urban Agriculture written by April Philips and published by John Wiley & Sons. This book was released on 2013-05-10 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of edible landscapes complete with more than 300 full-color photos and illustrations Designing Urban Agriculture is about the intersection of ecology, design, and community. Showcasing projects and designers from around the world who are forging new paths to the sustainable city through urban agriculture landscapes, it creates a dialogue on the ways to invite food back into the city and pave a path to healthier communities and environments. This full-color guide begins with a foundation of ecological principles and the idea that the food shed is part of a city's urban systems network. It outlines a design process based on systems thinking and developed for a lifecycle or regenerative-based approach. It also presents strategies, tools, and guidelines that enable informed decisions on planning, designing, budgeting, constructing, maintaining, marketing, and increasing the sustainability of this re-invented cityscape. Case studies demonstrate the environmental, economic, and social value of these landscapes and reveal paths to a greener and healthier urban environment. This unique and indispensable guide: Details how to plan, design, fund, construct, and leverage the sustainability aspects of the edible landscape typology Covers over a dozen typologies including community gardens, urban farms, edible estates, green roofs and vertical walls, edible school yards, seed to table, food landscapes within parks, plazas, streetscapes and green infrastructure systems and more Explains how to design regenerative edible landscapes that benefit both community and ecology and explores the connections between food, policy, and planning that promote viable food shed systems for more resilient communities Examines the integration of management, maintenance, and operations issues Reveals how to create a business model enterprise that addresses a lifecycle approach
Download or read book Driveways Paths and Patios written by Tony McCormack and published by Crowood. This book was released on 2011-09-20 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Driveways, paths and patios are an essential part of most properties and this comprehensive book provides a detailed explanation of exactly how they are designed, planned and constructed. Discusses the design of driveways, paths and patios with reference to their planned use, style, size, gradients and special features such as steps, ramps and terraces. Considers the range of materials available including block paving, flags, slabs, setts, cubes, cobbles, loose aggregates, plain & patterned concrete and tarmac. Analyses how to estimate costs and making the choice between the DIY approach and using a professional contractor. Examines the critical issue of drainage. Lays bare the mathematics associated with accurate setting-out and levelling. Describes the range of tools and equipment needed. Details the correct constructions of kerbs and edging and laying methods for flags, block paving and much more.
Download or read book Metal Building Systems 3E PB written by Alexander Newman and published by McGraw-Hill Companies. This book was released on 2023-06-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The most complete, up-to-date metal building systems guide Fully revised for the latest building codes and industry trends, Metal Building Systems, Third Edition, explains how to select, specify, and design preengineered buildings with confidence. In this book, a practicing structural engineer goes beyond manufacturer-supplied specifications to provide impartial and objective information that can save you money and time. A new chapter on anchor bolts and embedments, many new illustrations, plus new and updated design examples, are included in this practical reference. End-of-chapter review questions reinforce the material presented. Thisis an essential resource for architects, engineers, construction specifiers, design professionals, facility managers, building officials, and contractors working with metal building systems. COMPREHENSIVE COVERAGE INCLUDES: Structural loads and design methods Structural system selection criteria Primary framing Secondary framing: girts and purlins Metal roofing Wall materials Insulation The process of buying a metal building Common problems and failures Lateral drift and vertical deflections Foundation design Anchor bolts and embedments Current design trends Reroofing and renovations Specifying crane buildings Avoiding construction problems
Download or read book Green Roofs written by Earth Pledge (Organization) and published by Schiffer Publishing. This book was released on 2005 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examine possibilities for city-wide green roof development using 335 color photographs, 40 in-depth building case studies, and 7 municipal case studies of Berlin, Tokyo, London, Portland, Chicago, Toronto, and New York. This book includes an opening essay by William McDonough, an architect and leader of the sustainable development movement, and details the ecological benefits, technical requirements, architectural history, and design possibilities of vegetated rooftops.
Download or read book Design of FRP and Steel Plated RC Structures written by Deric Oehlers and published by Elsevier. This book was released on 2004-09-11 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are a large and ever-increasing number of structures and buildings worldwide that are in need of refurbishment, rehabilitation and strengthening. The retrofitting of beams and slabs for this purpose is now recognized as the most cost-effective and environmentally sustainable method of carrying out this essential renovation work. The authors of Design of FRP and Steel Plated RC Structures are both acknowledged world experts on these techniques and their book has been designed to provide the reader with a comprehensive overview of the established techniques and their applications as well as thorough coverage of newly emerging methodologies and their uses. The comparison of FRP and steel is a particular focus and the authors provide practical examples of where one material might be used in preference to another. Indeed practical, worked examples of how, when, and why specific solutions have been chosen in real-world situations are used throughout the text and provide the user with invaluable insights into the decision-making process and its technical background. Just as importantly these examples make the understanding and application of these techniques easier to understand for the student and the practitioner. The book is international in appeal, as while no reference is made to specific local codes the authors’ approach always follows that of the more advanced structural codes worldwide. As such it will remain an essential resource for many years to come. Design of FRP and Steel Plated RC Structures is an important reference for a broad range of researchers, students and practitioners including civil engineers and contractors, architects, designers and builders. Contains detailed worked examples throughout to aid understanding and provide technical insight Covers all types of metal plates and all types of FRP plates Uses design philosophies that can be used with any mathematical model Provides coverage of all main international guidelines
Download or read book Building Fences Gates written by Richard Freudenberger and published by Lark Books. This book was released on 1997 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete how-to manual, this book shows how to build, finish, maintain, and repair wooden fences and gates. The book includes advice on planning, deciding the purpose of the fence, adapting to the actual site, and selecting an appropriate gate. 120 photos, 60 in color.
Download or read book Design and Analysis of Connections in Steel Structures written by Alfredo Boracchini and published by John Wiley & Sons. This book was released on 2018-07-09 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces all the aspects needed for the safe and economic design and analysis of connections using bolted joints in steel structures. This is not treated according to any specific standard but making comparison among the different norms and methodologies used in the engineering practice, e.g. Eurocode, AISC, DIN, BS. Several examples are solved and illustrated in detail, giving the reader all the tools necessary to tackle also complex connection design problems. The book is introductory but also very helpful to advanced and specialist audiences because it covers a large variety of practice demands for connection design. Parts that are not taken to an advanced level are seismic design, welds, interaction with other materials (concrete, wood), and cold formed connections./p