Download or read book Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering written by The Organizing Committee of the 16th ICSMGE and published by IOS Press. This book was released on 2005-09-12 with total page 3742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.
Download or read book Consolidation Analyses of Soils written by Jian-Hua Yin and published by CRC Press. This book was released on 2020-12-28 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: When stresses are applied to saturated soil, deformation will occur as water in voids is squeezed out. Consolidation Analyses of Soils focuses on the consolidation of fully saturated soils. The book follows a classic approach by beginning with one-dimensional constitutive relations of soils and one-dimensional consolidation. It then moves on to analytical solutions to several one-dimensional consolidation problems and one-dimensional finite strain consolidation. The authors also present a finite element method for consolidation analysis of one-dimensional problems, analytical solutions to consolidation of soil with vertical drains, and a finite difference method for consolidation analysis of one-dimensional problems. Simplified methods for consolidation analysis of soils exhibiting creep are introduced and applied to different cases. Three-dimensional consolidation equations and solutions of typical three-dimensional consolidation problems are covered, as well as simplified finite element consolidation analysis of soils with vertical drain and finite element method for three-dimensional consolidation problems. The book is unique in that it covers both classic solutions and state-of-the-art work in consolidation analyses of soils. Authors Jian-Hua Yin is Chair Professor of Soil Mechanics in the Department of Civil and Environmental Engineering at The Hong Kong Polytechnic University. Guofu Zhu is a Professor in the Department of Engineering Structures and Mechanics at Wuhan University of Technology, China.
Download or read book Advanced Geotechnical Engineering written by Chandrakant S. Desai and published by CRC Press. This book was released on 2013-11-27 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soil-structure interaction is an area of major importance in geotechnical engineering and geomechanics Advanced Geotechnical Engineering: Soil-Structure Interaction using Computer and Material Models covers computer and analytical methods for a number of geotechnical problems. It introduces the main factors important to the application of computer methods and constitutive models with emphasis on the behavior of soils, rocks, interfaces, and joints, vital for reliable and accurate solutions. This book presents finite element (FE), finite difference (FD), and analytical methods and their applications by using computers, in conjunction with the use of appropriate constitutive models; they can provide realistic solutions for soil–structure problems. A part of this book is devoted to solving practical problems using hand calculations in addition to the use of computer methods. The book also introduces commercial computer codes as well as computer codes developed by the authors. Uses simplified constitutive models such as linear and nonlinear elastic for resistance-displacement response in 1-D problems Uses advanced constitutive models such as elasticplastic, continued yield plasticity and DSC for microstructural changes leading to microcracking, failure and liquefaction Delves into the FE and FD methods for problems that are idealized as two-dimensional (2-D) and three-dimensional (3-D) Covers the application for 3-D FE methods and an approximate procedure called multicomponent methods Includes the application to a number of problems such as dams , slopes, piles, retaining (reinforced earth) structures, tunnels, pavements, seepage, consolidation, involving field measurements, shake table, and centrifuge tests Discusses the effect of interface response on the behavior of geotechnical systems and liquefaction (considered as a microstructural instability) This text is useful to practitioners, students, teachers, and researchers who have backgrounds in geotechnical, structural engineering, and basic mechanics courses.
Download or read book Porous Media written by Wolfgang Ehlers and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume offers a state-of-the-art report on the various recent sci entific developments in the Theory of Porous Media (TPM) comprehending the basic theoretical concepts in continuum mechanics on porous and mul tiphasic materials as well as the wide range of experimental and numerical applications. Following this, the volume does not only address the sophisti cated reader but also the interested beginner in the area of Porous Media by presenting a collection of articles. These articles written by experts in the field concern the fundamental approaches to multiphasic and porous materials as well as various applications to engineering problems. In many branches of engineering just as in applied natural sciences like bio- and chemomechanics, one often has to deal with continuum mechanical problems which cannot be uniquely classified within the well-known disci plines of either "solid mechanics" or "fluid mechanics". These problems, characterized by the fact that they require a unified treatment of volumetri cally coupled solid-fluid aggregates; basically fall into the categories of either mixtures or porous media. Following this, there is a broad variety of problems ranging in this category as for example the investigation of reacting fluid mix tures or solid-fluid suspensions as well as the investigation of the coupled solid deformation and pore-fluid flow behaviour of liquid- and gas-saturated porous solid skeleton materials like geomaterials (soil, rock, concrete, etc. ), polymeric and metallic foams or biomaterials (hard and soft tissues, etc).
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1971 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Dissertation Index written by and published by . This book was released on 1989 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oilfield Engineering with Polymers Conference written by and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series of conferences, occurring regularly since 1996, is becoming recognised as the leading forum for open discussion on the behaviour of non-metallic materials when used in upstream oilfield service. Offshore oil & gas production is frequently associated with harsh operating environments. Equipment, systems and components used must survive these rigours whilst continuing to operate efficiently for long periods. The event provided an excellent overview of the current state and future potential for polymers in the oilfield environment. Session 1: Rapid Gas (Explosive) Decompression: Mechanisms And Laboratory Versus Field; Session 2: Laminated Polymer/Metal Structures: Development And Design Session 3: Risers And Pipelines Thermoplastics: Testing And Qualification; Session 4: Pipelines: Repair Guidelines And Insulation; Session 5: High Pressure Gas Permeation Through Oilfield Polymers Session 6: Advanced Composites: Durability In Water And Service In Downhole Environments; Session 7: Thermoplastics For High Pressure And Other Oilfield Service; Session 8: Fluorinated Elastomers For Severe Oilfield Service; Session 9: Thermal Insulation
Download or read book Embankments on Soft Clay written by S. Leroueil and published by . This book was released on 1990 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1984 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical abstracts written by and published by . This book was released on 1986 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book HRIS Abstracts written by and published by . This book was released on 1988 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Aspects of Underground Construction in Soft Ground written by Giulia Viggiani and published by CRC Press. This book was released on 2012-09-05 with total page 1099 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Aspects of Underground Construction in Soft Ground comprises a collection of 118 papers, four reports on symposium themes, and four invited lectures presented at the seventh International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, held in Rome, Italy, 16-18 May 2011.The symposium was organized by the
Download or read book Computational Modeling of Multiphase Geomaterials written by Fusao Oka and published by CRC Press. This book was released on 2012-07-05 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on the authors' well-regarded work in the field, this book provides readers with the knowledge and tools to tackle problems in geomechanics. It shows how numerical methods and constitutive modeling can help predict the behavior of geomaterials such as soil and rock. The authors describe the constitutive modeling of soils for rate-dependent behavior, strain localization, multiphase theory, and applications in the context of large deformations. They also emphasize viscoplasticity and water-soil coupling.
Download or read book Soils and Foundations written by and published by . This book was released on 2000 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Analysis in Geotechnical Engineering written by David M Potts and published by Thomas Telford. This book was released on 2001 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: An insight into the use of the finite method in geotechnical engineering. The first volume covers the theory and the second volume covers the applications of the subject. The work examines popular constitutive models, numerical techniques and case studies.
Download or read book Finite Element Bibliography written by Gerard De Vries and published by Springer. This book was released on 1976-12 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thjs bibliography had its inception in 1967, when the compilers first attempted a comprehensive cov erage of the finite element literature using both manual and computer-based retrieval. Initially, the data base was stored on a card index, but this was subsequently transferred to punched cards and magnetic tape. Computer processing was adopted at an early stage to derive the three index formats from the data base. Over the subsequent years, several versions of the bibliography were produced, with two of these being made available in a report form to other researchers. From the widespread interest in these documents, it became evident that there was a need for a commercially-available comprehensive bibliography in this area. A major effort was undertaken to revise, update, and extend the data base, resulting in this present volume. The bibliography covers the period 1956-1975 primarily, although some earlier publications of histori cal interest are included. The citations are not restricted to the English language and documents are listed in many languages and from diverse places of origin. All publication formats were accepted, so that references will be found to books, monographs, journal papers and articles, theses, dissertations, reports, surveys, and the like.
Download or read book Prediction Analysis and Design in Geomechanical Applications written by International Association for Computer Methods and Advances in Geomechanics and published by Pàtron. This book was released on 2005 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt:
