Download or read book Forced Folds and Fractures written by Mohammed S. Ameen and published by Geological Society of London. This book was released on 2000 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Folding and Fracturing of Rocks written by C.E. Bond and published by Geological Society of London. This book was released on 2020-01-02 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Publication is a celebration of research into the Folding and Fracturing of Rocks to mark the 50th anniversary of the publication of the seminal textbook by J. G. Ramsay. Folding and Fracturing of Rocks summarised the key structural geology concepts of the time. Through his numerical and geometric focus John pioneered and provided solutions to understanding the processes leading to the folding and fracturing of rocks. His strong belief that numerical and geometric solutions, to understanding crustal processes, should be tested against field examples added weight and clarity to his work. The basic ideas and solutions presented in the text are as relevant now as they were 50 years ago, and this collection of papers celebrates John’s contribution to structural geology. The papers explore the lasting impact of John and his work, they present case studies and a modern understanding of the process documented in the Folding and Fracturing of Rocks.
Download or read book Rock Fractures and Fluid Flow written by National Research Council and published by National Academies Press. This book was released on 1996-08-27 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific understanding of fluid flow in rock fracturesâ€"a process underlying contemporary earth science problems from the search for petroleum to the controversy over nuclear waste storageâ€"has grown significantly in the past 20 years. This volume presents a comprehensive report on the state of the field, with an interdisciplinary viewpoint, case studies of fracture sites, illustrations, conclusions, and research recommendations. The book addresses these questions: How can fractures that are significant hydraulic conductors be identified, located, and characterized? How do flow and transport occur in fracture systems? How can changes in fracture systems be predicted and controlled? Among other topics, the committee provides a geomechanical understanding of fracture formation, reviews methods for detecting subsurface fractures, and looks at the use of hydraulic and tracer tests to investigate fluid flow. The volume examines the state of conceptual and mathematical modeling, and it provides a useful framework for understanding the complexity of fracture changes that occur during fluid pumping and other engineering practices. With a practical and multidisciplinary outlook, this volume will be welcomed by geologists, petroleum geologists, geoengineers, geophysicists, hydrologists, researchers, educators and students in these fields, and public officials involved in geological projects.
Download or read book Fundamentals of Fractured Reservoir Engineering written by T.D. van Golf-Racht and published by Elsevier. This book was released on 1982-04-01 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the modem language of reservoir engineering by reservoir description is understood the totality of basic local information concerning the reservoir rock and fluids which by various procedures are extrapolated over the entire reservoir. Fracture detection, evaluation and processing is another essential step in the process of fractured reservoir description. In chapter 2, all parameters related to fracture density and fracture intensity, together with various procedures of data processing are discussed in detail. After a number of field examples, developed in Chap. 3, the main objective remains the quantitative evaluation of physical properties. This is done in Chap. 4, where the evaluation of fractures porosity and permeability, their correlation and the equivalent ideal geometrical models versus those parameters are discussed in great detail. Special rock properties such as capillary pressure and relative permeability are reexamined in the light of a double-porosity reservoir rock. In order to complete the results obtained by direct measurements on rock samples, Chap. 5 examines fracturing through indirect measurements from various logging results. The entire material contained in these five chapters defines the basic physical parameters and indicates procedures for their evaluation which may be used further in the description of fractured reservoirs.
Download or read book Folds and Fractures written by John G. Ramsay and published by . This book was released on 1987 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Techniques of Modern Structural Geology written by John G. Ramsay and published by Academic Press. This book was released on 1983 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: CD-ROM contains the programs described v. 3 and listed in the appendices of the sessions.
Download or read book Geologic Fracture Mechanics written by Richard A. Schultz and published by Cambridge University Press. This book was released on 2019-08-08 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to geologic fracture mechanics covering geologic structural discontinuities from theoretical and field-based perspectives.
Download or read book Physical Geology written by Steven Earle and published by . This book was released on 2016-08-12 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a discount Black and white version. Some images may be unclear, please see BCCampus website for the digital version.This book was born out of a 2014 meeting of earth science educators representing most of the universities and colleges in British Columbia, and nurtured by a widely shared frustration that many students are not thriving in courses because textbooks have become too expensive for them to buy. But the real inspiration comes from a fascination for the spectacular geology of western Canada and the many decades that the author spent exploring this region along with colleagues, students, family, and friends. My goal has been to provide an accessible and comprehensive guide to the important topics of geology, richly illustrated with examples from western Canada. Although this text is intended to complement a typical first-year course in physical geology, its contents could be applied to numerous other related courses.
Download or read book Industrial Structural Geology written by F.L. Richards and published by Geological Society of London. This book was released on 2015-10-22 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The practical application of structural geology in industry is varied and diverse; it is relevant at all scales, from plate-wide screening of new exploration areas down to fluid-flow behaviour along individual fractures. From an industry perspective, good structural practice is essential since it feeds into the quantification and recovery of reserves and ultimately underpins commercial investment choices. Many of the fundamental structural principles and techniques used by industry can be traced back to the academic community, and this volume aims to provide insights into how structural theory translates into industry practice. Papers in this publication describe case studies and workflows that demonstrate applied structural geology, covering a spread of topics including trap definition, fault seal, fold-and-thrust belts, fractured reservoirs, fluid flow and geomechanics. Against a background of evolving ideas, new data types and advancing computational tools, the volume highlights the need for structural geologists to constantly re-evaluate the role they play in solving industrial challenges.
Download or read book Analysis of Geological Structures written by Neville J. Price and published by Cambridge University Press. This book was released on 1990-08-16 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: A knowledge of structural geology is fundamental to understanding the processes by which the earth's crust has evolved. It is a subject of fundamental importance to students of geology, experienced field geologists and academic researchers as well as to petroleum and mining engineers. In contrast to many structural textbooks which dwell upon geometrical descriptions of geological structures, this book emphasises mechanical principles and the way in which they can be used to understand how and why a wide range of geological structures develop. Structures on all scales are considered but the emphasis of the book is on those that can be seen on the scale of hand specimen or outcrop. Drawing on their considerable teaching experience the authors present a coherent and lucid analysis of geological structures which will be welcomed by a wide variety of earth scientists.
Download or read book The Techniques of Modern Structural Geology written by John G. Ramsay and published by . This book was released on 1987 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization Modeling Monitoring and Remediation of Fractured Rock written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2021-01-29 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractured rock is the host or foundation for innumerable engineered structures related to energy, water, waste, and transportation. Characterizing, modeling, and monitoring fractured rock sites is critical to the functioning of those infrastructure, as well as to optimizing resource recovery and contaminant management. Characterization, Modeling, Monitoring, and Remediation of Fractured Rock examines the state of practice and state of art in the characterization of fractured rock and the chemical and biological processes related to subsurface contaminant fate and transport. This report examines new developments, knowledge, and approaches to engineering at fractured rock sites since the publication of the 1996 National Research Council report Rock Fractures and Fluid Flow: Contemporary Understanding and Fluid Flow. Fundamental understanding of the physical nature of fractured rock has changed little since 1996, but many new characterization tools have been developed, and there is now greater appreciation for the importance of chemical and biological processes that can occur in the fractured rock environment. The findings of Characterization, Modeling, Monitoring, and Remediation of Fractured Rock can be applied to all types of engineered infrastructure, but especially to engineered repositories for buried or stored waste and to fractured rock sites that have been contaminated as a result of past disposal or other practices. The recommendations of this report are intended to help the practitioner, researcher, and decision maker take a more interdisciplinary approach to engineering in the fractured rock environment. This report describes how existing tools-some only recently developed-can be used to increase the accuracy and reliability of engineering design and management given the interacting forces of nature. With an interdisciplinary approach, it is possible to conceptualize and model the fractured rock environment with acceptable levels of uncertainty and reliability, and to design systems that maximize remediation and long-term performance. Better scientific understanding could inform regulations, policies, and implementation guidelines related to infrastructure development and operations. The recommendations for research and applications to enhance practice of this book make it a valuable resource for students and practitioners in this field.
Download or read book Folding and Fracturing of Rocks written by John G. Ramsay and published by . This book was released on 2003 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Folding and Fracturing of Rocks was first published in 1967. It was one of the first major publications aimed at developing for geologists the basic theory of stress and strain in mathematical terms and explaining how this theory could be used to solve practical problems in structural geology and tectonics. Although out-of-print for many years, it is still one of the most frequently cited and quoted texts in modern research publications in structural geology. Although texts discussing the basic theory of stress and strain had been long available in engineering, metallurgic and materials science, very few of these texts made any reference to the application of these principles to the study of rock strain, fracturing and folding processes commonly arising in geology. Folding and Fracturing of Rocks developed the theory of both small and large finite strain with particular emphasis on progressive deformation and its geological implications for the development of the structures actually observed in naturally deformed rocks. It was one of the first textbooks to discuss the practical methods for evaluating the states of finite strain in two and three dimensions and the implications of these methods to further our understanding of structural geometry. The book set out the concepts of displacement and finite strain and showed how strain states could be represented in diagrammatic forms as originally devised by Otto Mohr for states of stress. Many of the developments were novel at the time of publication and have had major applications in subsequent research. The discussions and methods of strain analysis set out in Folding and Fracturing of Ricks have stood the test of time and many of the subsequent research developments in structural geology have their origins in this book. The reasons for the relevance of this book to current research are first, the book is based on sound mathematical principles that have not become dated and second, the discussions of deformation theory are illustrated with many photographs of the structures seen in naturally deformed rocks. The author has always been of the opinion that the structures actually observed in naturally formed rocks form the key to our understanding of tectonic processes and that the development of mechanical models for the origin of these structures must always be compared with natural systems if they are to be truly relevant. John Ramsay was born in London in 1931. He did his doctoral research in the Scottish Highlands working on the deformation patterns seen in complexly folded rocks of the Moine Series and the relationships seen in folded basement and cover rocks obtaining his Ph.D. in 1954. After undertaking his military service in the Corps of the Royal Engineers (as Violoncellist and Tenor drummer) he was appointed to the teaching staff of Imperial College in 1957. Subsequently he held Professorships at London University and Leeds University. In 1977, he was appointed to a Professorship of Geology at the Eidgen ssische Technische Hochschule and University of Z rich, Switzerland. John Ramsay has been author and co-author of four books and many papers in structural geology. His work in advancing structural geology has been recognized by the awards of the Bigsby and Wollaston medals of the Geological Society, the Prestwich Medal of the Soci t G ologique de France, the Holmes Medal of the European Union of Geosciences, the Tranenster Medal of the University of Li ge, and in 1992 he was appointed to the Order of Commander of the British Empire in the Queen's Honours list.
Download or read book Folds and Tensile Fractures in Stratified Rocks written by Günther Kampfer and published by . This book was released on 2011-05 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Folds and Tensile Fractures in Stratified Rocks This work tries to contribute to the development of quantitative tools for an objective interpretation, based on mechanical equilibrium and material strength of folds, which can be potential oil reservoirs. Furthermore, the objective is to improve the prediction of fracture distributions in layered sequences, which control the permeability. Experiments, analytical and numerical results are presented on the onset and evolution of folds and fractures, which happens at different scales. Analogue experiments, conducted in the Shell-Laboratory in Rijswijk, The Netherlands are discussed. The outcomes are compared with results obtained by a theoretical study. A geometrical imperfection and activation of bed parallel slip is shown to be essential for the creation of folds to be more likely compared to other failure modes (thrusting, compaction bands). Interfacial properties in a multilayered setting are also affecting the fracture spacing. Saturation is linked to the delamination of the interface between the layer and its foundation. At last, a new experimental device for the study of bending fractures is introduced.
Download or read book Thrust Belts and Foreland Basins written by Olivier Lacombe and published by Springer Science & Business Media. This book was released on 2007-08-10 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is the important geologic information recorded in Thrust Belts and Foreland Basins (TBFB) on the evolution of orogens? How do they transcript the coupled influence of deep and surficial geological processes? Is it still worth looking for hydrocarbons in foothills areas? These and other questions are addressed in the volume edited by Lacombe, Lavé, Roure and Vergés, which constitutes the Proceedings of the first meeting of the new ILP task force on "Sedimentary Basins", held in December 2005 at the Institut Français du Pétrole, on behalf of the Société Géologique de France and the Sociedad Geologica de España. This volumes spans a timely bridge between recent advances in the understanding of surface processes, field investigations, high resolution imagery, analogue-numerical modelling, and hydrocarbon exploration in TBFB. With 25 thematic papers including well-documented regional case studies, it provides a milestone publication as a new in-depth examination of TBFB.
Download or read book Proceedings of the International Field Exploration and Development Conference 2020 written by Jia'en Lin and published by Springer Nature. This book was released on 2021-06-17 with total page 3487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 10th International Field Exploration and Development Conference (IFEDC 2020). The proceedings focuses on Reservoir Surveillance and Management, Reservoir Evaluation and Dynamic Description, Reservoir Production Stimulation and EOR, Ultra-Tight Reservoir, Unconventional Oil and Gas Resources Technology, Oil and Gas Well Production Testing, Geomechanics. The conference not only provides a platform to exchanges experience, but also promotes the development of scientific research in oil & gas exploration and production. The main audience for the work includes reservoir engineer, geological engineer, enterprise managers senior engineers as well as professional students.
Download or read book Fracture and Life written by Brian Cotterell and published by World Scientific. This book was released on 2010 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an interdisciplinary review of the effect of fracture on life, following the development of the understanding of fracture written from a historical perspective. After a short introduction to fracture, the first section of the book covers the effects of fracture on the evolution of the Earth, plants and animals, and man. The second section of the book covers the largely empirical control of fracture from ancient times to the end of the nineteenth century. The final section reviews the development of fracture theory as a discipline and its application during the twentieth century through to the present time.
