Download or read book Fluid Mixture Separation Technologies for Cost Reduction and Process Improvement written by Jose L. Bravo and published by William Andrew. This book was released on 1986 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Separation Technologies for the Industries of the Future written by Panel on Separation Technology for Industrial Reuse and Recycling and published by National Academies Press. This book was released on 1999-01-22 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processes—or processes that use physical, chemical, or electrical forces to isolate or concentrate selected constituents of a mixture—are essential to the chemical, petroleum refining, and materials processing industries. In this volume, an expert panel reviews the separation process needs of seven industries and identifies technologies that hold promise for meeting these needs, as well as key technologies that could enable separations. In addition, the book recommends criteria for the selection of separations research projects for the Department of Energy's Office of Industrial Technology.

Download or read book Unit Operations in Environmental Engineering written by Robert Noyes and published by William Andrew. This book was released on 1994-12-31 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the practical aspects of environmental technology organized into eight chapters relating to unit operations as follows: 1. Biological Technology2. Chemical Technology3. Containment and Barrier Technology4. Immobilization Technology5. Membrane Technology6. Physical Technology7. Radiation and Electrical Technology8. Thermal Destruction TechnologyTraditional technologies have been included, as well as those that can be considered innovative and emerging. The traditional approaches have been the most successful, as contractors are careful about bidding on some of the newer technologies. However, as regulatory requirements increase, markets will open for the innovative and emerging processes. There will be increasing pressure to break down complex waste streams, with each subsequent stream demanding separate treatment. In addition, a number of technologies have been developed by combining processes directly, or in a treatment train, and these developments are expected to assume increasing importance. However, such concerns as uncertainties due to liability, regulatory approval, price competition, and client approval have limited the application of some of these newer technologies.

Download or read book Melt Crystallization Technology written by Tine Arkenbout-de Vroome and published by CRC Press. This book was released on 1995-05-02 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Author's Preface There is a growing demand for ultrapure organic compounds such as fine chemicals, pharmaceuticals, and basic materials for use in the polymer industry. . . . In quite a number of cases, it is difficult or impossible to manufacture ultrapure organics efficiently using conventional separation techniques such as distillation. Moreover, conventional techniques usually require large amounts of energy. To improve the purification efficiency of organics, special techniques based on crystallization from the melt have been developed. Melt crystallization meets industry's need for a highly selective separation process for organic compounds which operates at low enough temperatures to prevent thermal degradation. Melt crystallization processes have the added advantage that they are energy-efficient and ecologically sound. Melt crystallization techniques appear to be particularly promising for upgrading organic materials and are one of the few routes that appear to be feasible for purifying starter materials for high-tech polymers. The aim of this book is to provide basic information on melt crystallization technology. . . . This monograph consists of three parts: 1. basic principles, 2. process options, and 3. technical equipment and applicability. This new book is the first unified guide and reference to an important chemical process technology. It is comprehensive and organized for easy reference. More than 150 diagrammatic representations, flow charts and photographs illustrate equipment and processes. More than 40 tables provide useful reference data. The Author Dr. Arkenbout studied chemistry at the University of Utrecht, and joined TNO, the Netherlands Organization for Applied Scientific Research. He has specialized in research on new separation processes and has had thirty of his articles on this subject published. He recently retired from the position of manager of physical separation research, but has remained active in this field through affiliations with the Laboratory of Solid State Chemistry at the University of Nijmegen, the Laboratory for Process Equipment, Delft University of Technology, and TNO.

Download or read book Journal of Petroleum Technology written by and published by . This book was released on 1987 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book JPT Journal of Petroleum Technology written by and published by . This book was released on 2000 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal of Separation Process Technology written by and published by . This book was released on 1988 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Research Agenda for Transforming Separation Science written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-10-30 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation science plays a critical role in maintaining our standard of living and quality of life. Many industrial processes and general necessities such as chemicals, medicines, clean water, safe food, and energy sources rely on chemical separations. However, the process of chemical separations is often overlooked during product development and this has led to inefficiency, unnecessary waste, and lack of consensus among chemists and engineers. A reevaluation of system design, establishment of standards, and an increased focus on the advancement of separation science are imperative in supporting increased efficiency, continued U.S. manufacturing competitiveness, and public welfare. A Research Agenda for Transforming Separation Science explores developments in the industry since the 1987 National Academies report, Separation and Purification: Critical Needs and Opportunities. Many needs stated in the original report remain today, in addition to a variety of new challenges due to improved detection limits, advances in medicine, and a recent emphasis on sustainability and environmental stewardship. This report examines emerging chemical separation technologies, relevant developments in intersecting disciplines, and gaps in existing research, and provides recommendations for the application of improved separation science technologies and processes. This research serves as a foundation for transforming separation science, which could reduce global energy use, improve human and environmental health, and advance more efficient practices in various industries.

Download or read book Process Engineering written by and published by . This book was released on 1986 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Separation Technologies for the Industries of the Future written by National Research Council and published by National Academies Press. This book was released on 1999-01-08 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processesâ€"or processes that use physical, chemical, or electrical forces to isolate or concentrate selected constituents of a mixtureâ€"are essential to the chemical, petroleum refining, and materials processing industries. In this volume, an expert panel reviews the separation process needs of seven industries and identifies technologies that hold promise for meeting these needs, as well as key technologies that could enable separations. In addition, the book recommends criteria for the selection of separations research projects for the Department of Energy's Office of Industrial Technology.

Download or read book Recent Developments in Chemical Process and Plant Design written by Henry A. McGee and published by Wiley-Interscience. This book was released on 1987 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This sourcebook describes the latest developments and applications of chemical process and plant design methodology. It provides reviews of a variety of topics, including catalyst design, process heat-exchange design, separation process design and process integration.

Download or read book Chemical Separation Technologies and Related Methods of Nuclear Waste Management written by Gregory R. Choppin and published by Springer Science & Business Media. This book was released on 1999-02-28 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation technologies are of crucial importance to the goal of significantly reducing the volume of high-level nuclear waste, thereby reducing the long-term health risks to mankind. International co-operation, including the sharing of concepts and methods, as well as technology transfer, is essential in accelerating research and development in the field. The writers of this book are all internationally recognised experts in the field of separation technology, well qualified to assess and criticize the current state of separation research as well as to identify future opportunities for the application of separation technologies to the solution of nuclear waste management problems. The major emphases in the book are research opportunities in the utilization of innovative and potentially more efficient and cost effective processes for waste processing/treatment, actinide speciation/separation methods, technological processing, and environmental restoration.

Download or read book Abstract Bulletin of the Institute of Paper Chemistry written by and published by . This book was released on 1987 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Membrane Separations written by Anil Kumar Pabby and published by CRC Press. This book was released on 2015-04-09 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Membrane Separations: Chemical, Pharmaceutical, Food, and Biotechnological Applications, Second Edition provides detailed information on membrane separation technologies from an international team of experts. The handbook fills an important gap in the current literature by providing a comprehensive discussion of membrane application

Download or read book Assessment of Potential Energy Savings in Fluid Separation Technologies written by and published by . This book was released on 1984 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Oil Shale Symposium Proceedings written by and published by . This book was released on 1992 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ionic Liquids in Separation Technology written by Antonia Perez De Los Rios and published by Elsevier. This book was released on 2014-08-08 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ionic Liquids in Separation Technology reports on the most important fundamental and technological advances in separation processes using ionic liquids. It brings together the latest developments in this fascinating field, supplements them with numerous practical tips, and thus provides those working in both research and industry with an indispensable source of information. The book covers fundamental topics of physical, thermal, and optical properties of ionic liquids, including green aspects. It then moves on to contexts and applications, including separation of proteins, reduction of environmental pollutants, separation of metal ions and organic compounds, use in electrochromic devices, and much more. For the specialist audience the book serves as a recompilation of the most important knowledge in this field, whereas for starting researchers in ionic liquid separation technology the book is a great introduction to the field. - First book in the marketplace dedicated to ionic liquids in separation technology - Contributions from scientists in academia and researchers in industry ensure the coverage of both scientific fundamentals and industrial applications - Covers a broad collection of applications in separation technology which makes the book a single source of information - Includes many practical tips for researchers in industry and scientists who apply ionic liquids in their work