Download or read book Fluid Flow and Gas Dispersion in Stirred Tank Reactors written by Jouko Laine and published by . This book was released on 1981 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Dispersion in Gas liquid Stirred Tank Reactor written by Zahira Yaakob and published by . This book was released on 1998 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Bioreactor Hydrodynamics and Gas Liquid Mass Transfer written by Enes Kadic and published by John Wiley & Sons. This book was released on 2014-03-14 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews and compares the major types of bioreactors, defines their pros and cons, and identifies research needs and figures of merit that have yet to be addressed Describes common modes of operation in bioreactors Covers the three common bioreactor types, including stirred-tank bioreactors, bubble column bioreactors, and airlift bioreactors Details less common bioreactors types, including fixed bed bioreactors and novel bioreactor designs Discusses advantages and disadvantages of each bioreactor and provides a procedure for optimal bioreactor selection based on current process needs Reviews the problems of bioreactor selection globally while considering all bioreactor options rather than concentrating on one specific bioreactor type
Download or read book Hydrodynamics of Gas Liquid Reactors written by Barry Azzopardi and published by John Wiley & Sons. This book was released on 2011-05-12 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of chemical reactors and their safety are as critical to the success of a chemical process as the actual chemistry taking place within the reactor. This book provides a comprehensive overview of the practical aspects of multiphase reactor design and operation with an emphasis on safety and clean technology. It considers not only standard operation conditions, but also the problems of runaway reaction conditions and protection against ensuing over-pressure. Hydrodynamics of Multiphase Reactors addresses both practical and theoretical aspects of this topic. Initial chapters discuss various different types of gas/liquid reactors from a practical viewpoint, and later chapters focus on the modelling of multiphase systems and computational methods for reactor design and problem solving. The material is written by experts in their specific fields and will include chapters on the following topics: Multiphase flow, Bubble columns, Sparged stirred vessels, Macroscale modelling, Microscale modelling, Runaway conditions, Behaviour of vessel contents, Choked flow, Measurement techniques.
Download or read book Fluid Mixing and Gas Dispersion in Agitated Tanks written by Gary B. Tatterson and published by . This book was released on 2003-04-01 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an organized literature review of research in mixing, power requirements and gas dispersion in agitated tanks up to 1991.
Download or read book Fluid Dynamics in Gas liquid Stirred Tank Reactors written by Rahman Sudiyo and published by . This book was released on 2006 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Bioreactor Design written by Klaas van't Riet and published by CRC Press. This book was released on 1991-01-07 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a graduate course in biochemical engineering, provides the basic knowledge needed for the efficient design of bioreactors and the relevant principles and data for practical process engineering, with an emphasis on enzyme reactors and aerated reactors for microorganisms. Includes exercises,
Download or read book Hydrodynamic Characterization of Heterogeneities in Aerated Stirred Tank Reactors Band 10 written by Jürgen Fitschen and published by Cuvillier Verlag. This book was released on 2022-10-12 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerated stirred tank reactors are commonly used for chemical, biological and pharmaceutical processes with the highest requirements for constant and efficient mass transport and mixing performance. These reactors are known for their simple design and a very extensive description of their operating behavior in the relevant literature. The purpose of this work is to identify heterogeneities and coherent structures in aerated stirred tank reactors and to describe what the influences of these structures have on the mass transport and mixing processes. For this purpose, both the global and local mixing time distributions and, for the first time, the dispersion coefficients are determined with high local resolution.
Download or read book Design of Multiphase Reactors written by Vishwas G. Pangarkar and published by John Wiley & Sons. This book was released on 2015-01-27 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details simple design methods for multiphase reactors in the chemical process industries Includes basic aspects of transport in multiphase reactors and the importance of relatively reliable and simple procedures for predicting mass transfer parameters Details of design and scale up aspects of several important types of multiphase reactors Examples illustrated through design methodologies presenting different reactors for reactions that are industrially important Includes simple spreadsheet packages rather than complex algorithms / programs or computational aid
Download or read book Lead Zinc 2000 written by J. E. Dutrizac and published by John Wiley & Sons. This book was released on 2013-09-12 with total page 1071 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Lead-Zinc 2000 Symposium is the fourth in the series of decennial conferences on the processing of lead and zinc; it isorganized by the Minerals, Metals and MaterialsSociety (TMS). The Symposium the culmination of over two years of work that included the preparation of the papers by the authors, as well as the refereeing, proof-reading and indexing by the editors. The proceedings volume contains sixty-four papers which cover all aspects of lead and zinc processing, including the global business trends of the metals, plant operations, new processing installations, emerging technologies and environmental considerations. The Lead-Zinc 2000 Symposium will also honor Dr. T.R.A. Davey for his many contributions to metallurgical science and the industry throughout his distinguished career.
Download or read book Handbook of Industrial Mixing written by Edward L. Paul and published by John Wiley & Sons. This book was released on 2004-02-17 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Industrial Mixing will explain the difference and uses of a variety of mixers including gear mixers, top entry mixers, side entry mixers, bottom entry mixers, on-line mixers, and submerged mixers The Handbook discusses the trade-offs among various mixers, concentrating on which might be considered for a particular process. Handbook of Industrial Mixing explains industrial mixers in a clear concise manner, and also: * Contains a CD-ROM with video clips showing different type of mixers in action and a overview of their uses. * Gives practical insights by the top professional in the field. * Details applications in key industries. * Provides the professional with information he did receive in school
Download or read book Chemical Reactor Modeling written by Hugo A. Jakobsen and published by Springer Science & Business Media. This book was released on 2008-10-15 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book closes the gap between Chemical Reaction Engineering and Fluid Mechanics. It provides the basic theory for momentum, heat and mass transfer in reactive systems. Numerical methods for solving the resulting equations as well as the interplay between physical and numerical modes are discussed. The book is written using the standard terminology of this community. It is intended for researchers and engineers who want to develop their own codes, or who are interested in a deeper insight into commercial CFD codes in order to derive consistent extensions and to overcome "black box" practice. It can also serve as a textbook and reference book.
Download or read book Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment written by Jyeshtharaj Joshi and published by Woodhead Publishing. This book was released on 2019-06-11 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment presents the latest computational fluid dynamic technologies. It includes an evaluation of safety systems for reactors using CFD and their design, the modeling of Severe Accident Phenomena Using CFD, Model Development for Two-phase Flows, and Applications for Sodium and Molten Salt Reactor Designs. Editors Joshi and Nayak have an invaluable wealth of experience that enables them to comment on the development of CFD models, the technologies currently in practice, and the future of CFD in nuclear reactors. Readers will find a thematic discussion on each aspect of CFD applications for the design and safety assessment of Gen II to Gen IV reactor concepts that will help them develop cost reduction strategies for nuclear power plants.
Download or read book Gas Dispersion and Vapor Bubble Collapse in a Stirred Tank Reactor written by James R. McConaghy (Jr) and published by . This book was released on 1966 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering Dynamics written by John Ingham and published by John Wiley & Sons. This book was released on 2008-02-08 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the modelling of dynamic chemical engineering processes is presented in a highly understandable way using the unique combination of simplified fundamental theory and direct hands-on computer simulation. The mathematics is kept to a minimum, and yet the nearly 100 examples supplied on www.wiley-vch.de illustrate almost every aspect of chemical engineering science. Each example is described in detail, including the model equations. They are written in the modern user-friendly simulation language Berkeley Madonna, which can be run on both Windows PC and Power-Macintosh computers. Madonna solves models comprising many ordinary differential equations using very simple programming, including arrays. It is so powerful that the model parameters may be defined as "sliders", which allow the effect of their change on the model behavior to be seen almost immediately. Data may be included for curve fitting, and sensitivity or multiple runs may be performed. The results can be seen simultaneously on multiple-graph windows or by using overlays. The resultant learning effect of this is tremendous. The examples can be varied to fit any real situation, and the suggested exercises provide practical guidance. The extensive experience of the authors, both in university teaching and international courses, is reflected in this well-balanced presentation, which is suitable for the teacher, the student, the chemist or the engineer. This book provides a greater understanding of the formulation and use of mass and energy balances for chemical engineering, in a most stimulating manner. This book is a third edition, which also includes biological, environmental and food process examples.
Download or read book Biochemical Engineering written by Shigeo Katoh and published by John Wiley & Sons. This book was released on 2009-12-18 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by renowned professors drawing on their experience gained in the world's most innovative biotechnology market, Japan, this advanced textbook provides an excellent and comprehensive introduction to the latest developments in the field. It provides an array of questions & answers and features numerous applied examples, extending to industrial applications with chapters on medical devices and downstream operations in bioprocesses. Useful for students studying the fundamentals of biochemical engineering, as well as for chemical engineers already working in this vital and expanding field.
Download or read book Mixing in the Process Industries written by A W NIENOW and published by Butterworth-Heinemann. This book was released on 1997-09-11 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions.
