Download or read book Fluid Dynamics in Gas liquid Stirred Tank Reactors written by Rahman Sudiyo and published by . This book was released on 2006 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrodynamics of Gas Liquid Reactors written by Barry Azzopardi and published by John Wiley & Sons. This book was released on 2011-05-12 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of chemical reactors and their safety are as critical to the success of a chemical process as the actual chemistry taking place within the reactor. This book provides a comprehensive overview of the practical aspects of multiphase reactor design and operation with an emphasis on safety and clean technology. It considers not only standard operation conditions, but also the problems of runaway reaction conditions and protection against ensuing over-pressure. Hydrodynamics of Multiphase Reactors addresses both practical and theoretical aspects of this topic. Initial chapters discuss various different types of gas/liquid reactors from a practical viewpoint, and later chapters focus on the modelling of multiphase systems and computational methods for reactor design and problem solving. The material is written by experts in their specific fields and will include chapters on the following topics: Multiphase flow, Bubble columns, Sparged stirred vessels, Macroscale modelling, Microscale modelling, Runaway conditions, Behaviour of vessel contents, Choked flow, Measurement techniques.
Download or read book Numerical and Experimental Investigation of Liquid and Gas liquid Flows in Stirred Tank Reactors written by Hamed Bashiri and published by . This book was released on 2015 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Bioreactor Hydrodynamics and Gas Liquid Mass Transfer written by Enes Kadic and published by John Wiley & Sons. This book was released on 2014-03-14 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews and compares the major types of bioreactors, defines their pros and cons, and identifies research needs and figures of merit that have yet to be addressed Describes common modes of operation in bioreactors Covers the three common bioreactor types, including stirred-tank bioreactors, bubble column bioreactors, and airlift bioreactors Details less common bioreactors types, including fixed bed bioreactors and novel bioreactor designs Discusses advantages and disadvantages of each bioreactor and provides a procedure for optimal bioreactor selection based on current process needs Reviews the problems of bioreactor selection globally while considering all bioreactor options rather than concentrating on one specific bioreactor type
Download or read book Numerical Simulation of Multiphase Reactors with Continuous Liquid Phase written by Chao Yang and published by Academic Press. This book was released on 2014-09-04 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation of multiphase reactors with continuous liquid phase provides current research and findings in multiphase problems, which will assist researchers and engineers to advance this field. This is an ideal reference book for readers who are interested in design and scale-up of multiphase reactors and crystallizers, and using mathematical model and numerical simulation as tools. Yang and Mao's book focuses on modeling and numerical applications directly in the chemical, petrochemical, and hydrometallurgical industries, rather than theories of multiphase flow. The content will help you to solve reacting flow problems and/or system design/optimization problems. The fundamentals and principles of flow and mass transfer in multiphase reactors with continuous liquid phase are covered, which will aid the reader's understanding of multiphase reaction engineering. - Provides practical applications for using multiphase stirred tanks, reactors, and microreactors, with detailed explanation of investigation methods - Presents the most recent research efforts in this highly active field on multiphase reactors and crystallizers - Covers mathematical models, numerical methods and experimental techniques for multiphase flow and mass transfer in reactors and crystallizers
Download or read book Fluid Flow and Gas Dispersion in Stirred Tank Reactors written by Jouko Laine and published by . This book was released on 1981 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Mixing and Gas Dispersion in Agitated Tanks written by Gary B. Tatterson and published by . This book was released on 2003-04-01 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an organized literature review of research in mixing, power requirements and gas dispersion in agitated tanks up to 1991.
Download or read book Gas Mixing in Gas liquid Stirred Tank Reactor written by Zahira Yaakob and published by . This book was released on 1996 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: A structured model based on simple fluid mechanical interactions between buoyant bubbles and the impeller generated liquid flow has been examined. This work aims to describe in a more general and fundamental way typical flow behavior in a gas-liquid stirred tank reactor. The model called `network-of-zones' envisages the reactor as axi-symmetric and thus 2-dimensional, with impeller flow divided into several concentric nested loops. Gas leaves each ...
Download or read book Basic Bioreactor Design written by Klaas van't Riet and published by CRC Press. This book was released on 1991-01-07 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a graduate course in biochemical engineering, provides the basic knowledge needed for the efficient design of bioreactors and the relevant principles and data for practical process engineering, with an emphasis on enzyme reactors and aerated reactors for microorganisms. Includes exercises,
Download or read book Computational Flow Modeling for Chemical Reactor Engineering written by Vivek V. Ranade and published by Academic Press. This book was released on 2002 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book relates the individual aspects of chemical reactor engineering and computational flow modeling in a coherent way to explain the potential of computational flow modeling for reactor engineering research and practice.
Download or read book 2nd International Conference on Bioreactor Fluid Dynamics written by Roger King and published by . This book was released on 1988 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Industrial Mixing written by Edward L. Paul and published by John Wiley & Sons. This book was released on 2004-02-17 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Industrial Mixing will explain the difference and uses of a variety of mixers including gear mixers, top entry mixers, side entry mixers, bottom entry mixers, on-line mixers, and submerged mixers The Handbook discusses the trade-offs among various mixers, concentrating on which might be considered for a particular process. Handbook of Industrial Mixing explains industrial mixers in a clear concise manner, and also: * Contains a CD-ROM with video clips showing different type of mixers in action and a overview of their uses. * Gives practical insights by the top professional in the field. * Details applications in key industries. * Provides the professional with information he did receive in school
Download or read book Gas Liquid Flow Modeling for Renewable Fuels Production written by and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerobic/anaerobic and gas fermentation pathways have emerged as promising new technologies for the generation of renewable fuels/chemicals from biomass derived sugars, and mixtures of greenhouse/energy rich gas streams (CO2/CH4/H2/CO) via microbial action. Example pathways include sugars-to-ethanol conversion, biomethanation (CO2/H2 to CH4), biogas upgrading, CO fermentation and wet-waste conversion. Gas and liquid phase transport, mass-transfer, and mixing physics at large length scales can significantly affect microbial conversion rates, particularly when the microbial reaction requires a narrow set of conditions. These phenomena are difficult to study in small-scale bench-top reactors that are typically well-mixed. Predictive computational fluid dynamics (CFD) based simulations can therefore aid in the scale-up, design and optimization of these reactors. This work presents multiphase Euler-Euler CFD simulations of at-scale (~500 m3) bioreactors. Our mathematical model treats the gas and liquid as interpenetrating phases. This approach reduces the computational complexity of tracking individual gas bubbles that are several orders of magnitude smaller than reactor dimensions. We solve the Reynolds averaged Navier-Stokes (RANS) multiphase equations that account for phase and chemical species transport, interphase mass and momentum transfer and uses a phenomenological model for gas uptake by microbes. We use a customized solver derived from open-source CFD toolbox, OpenFOAM [1], to perform these simulations, which has been validated against small-scale reactors in our previous work [2]. There is currently a knowledge-gap regarding bubble-size distributions when using gas mixtures with vastly different properties, which can have a significant impact overall mass-transfer. For example, hydrogen bubbles are more buoyant compared to other relatively heavier gases (CO2/CH4/CO), resulting in a large distribution of residence times and bubble sizes. This work therefore develops a deeper understanding of bubble dynamics and interphase mass transfer in such heterogenous gas mixtures through well-resolved computational models. We use a population balance model (PBM) for bubble-size-distribution modeling that is validated against small-scale experiments in our solver with an uncertainty quantification study for bubble coalescence and break-up model parameters. Results pertaining to multiple simulations of gas-fermentation reactors are presented where gas mixtures with varying compositions of CO2/CH4/CO/H2 are imposed at the sparger boundaries. The spatio-temporal variations in bubble-size distribution and mass transfer coefficient are analyzed for varying superficial velocities and gas-compositions for varying sizes of bubble-column and airlift reactors. This work will also examine the performance of different reactor designs, viz. bubble column reactor, airlift reactor with an internal draft tube, and a stirred-tank reactor with Rushton impellers. Reactor mass-transfer coefficient, gas hold-up, and dissolved gas distribution are critically analyzed among reactors, and sensitivity studies pertaining to gas flow rates and reactor geometry will be presented. [1] Weller, H., Tabor, G., Jasak, H. and Fureby, C., A tensorial approach to computational continuum mechanics using object-oriented techniques, Computers in physics, 12, 6, 620--631, 1998. [2] Rahimi, M., Sitaraman, H., Humbird, D. and Stickel, J., Computational fluid dynamics study of full-scale aerobic bioreactors: Evaluation of gas-liquid mass transfer, oxygen uptake, and dynamic oxygen distribution, Chemical Engineering Research and Design, 139: 283-295.
Download or read book Hydrodynamics and Mass Transfer Studies of a Self inducing Gas liquid Stirred Tank Reactor written by Caroline Leguay and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Reactive Flows written by R. Borghi and published by Springer. This book was released on 2012-10-20 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent reactive flows are of common occurrance in combustion engineering, chemical reactor technology and various types of engines producing power and thrust utilizing chemical and nuclear fuels. Pollutant formation and dispersion in the atmospheric environment and in rivers, lakes and ocean also involve interactions between turbulence, chemical reactivity and heat and mass transfer processes. Considerable advances have occurred over the past twenty years in the understanding, analysis, measurement, prediction and control of turbulent reactive flows. Two main contributors to such advances are improvements in instrumentation and spectacular growth in computation: hardware, sciences and skills and data processing software, each leading to developments in others. Turbulence presents several features that are situation-specific. Both for that reason and a number of others, it is yet difficult to visualize a so-called solution of the turbulence problem or even a generalized approach to the problem. It appears that recognition of patterns and structures in turbulent flow and their study based on considerations of stability, interactions, chaos and fractal character may be opening up an avenue of research that may be leading to a generalized approach to classification and analysis and, possibly, prediction of specific processes in the flowfield. Predictions for engineering use, on the other hand, can be foreseen for sometime to come to depend upon modeling of selected features of turbulence at various levels of sophistication dictated by perceived need and available capability.
Download or read book Transport Phenomena for Chemical Reactor Design written by Laurence A. Belfiore and published by John Wiley & Sons. This book was released on 2003-04-11 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laurence Belfiore’s unique treatment meshes two mainstream subject areas in chemical engineering: transport phenomena and chemical reactor design. Expressly intended as an extension of Bird, Stewart, and Lightfoot’s classic Transport Phenomena, and Froment and Bischoff’s Chemical Reactor Analysis and Design, Second Edition, Belfiore’s unprecedented text explores the synthesis of these two disciplines in a manner the upper undergraduate or graduate reader can readily grasp. Transport Phenomena for Chemical Reactor Design approaches the design of chemical reactors from microscopic heat and mass transfer principles. It includes simultaneous consideration of kinetics and heat transfer, both critical to the performance of real chemical reactors. Complementary topics in transport phenomena and thermodynamics that provide support for chemical reactor analysis are covered, including: Fluid dynamics in the creeping and potential flow regimes around solid spheres and gas bubbles The corresponding mass transfer problems that employ velocity profiles, derived in the book’s fluid dynamics chapter, to calculate interphase heat and mass transfer coefficients Heat capacities of ideal gases via statistical thermodynamics to calculate Prandtl numbers Thermodynamic stability criteria for homogeneous mixtures that reveal that binary molecular diffusion coefficients must be positive In addition to its comprehensive treatment, the text also contains 484 problems and ninety-six detailed solutions to assist in the exploration of the subject. Graduate and advanced undergraduate chemical engineering students, professors, and researchers will appreciate the vision, innovation, and practical application of Laurence Belfiore’s Transport Phenomena for Chemical Reactor Design.
Download or read book Advances in Engineering Fluid Mechanics Multiphase Reactor and Polymerization System Hydr written by Nicholas P Cheremisinoff and published by Elsevier. This book was released on 1996-08-27 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the Advances in Engineering Fluid Mechanics Series covers topics in hydrodynamics related to polymerization of elastomers and plastics. Emphasis is given to advanced concepts in multiphase reactor systems often used in the manufacturing of products. This volume is comprised of 30 chapters that address key subject areas such as multiphase mixing concepts, multicomponet reactors and the hydrodynamics associated with their operations, and slurry flow behavior associated with non-Newtonian flows.
