Download or read book Flow Induced Microstructural Evolution of Thermoreversible Colloidal Gels of Adhesive Spheres written by Priya Varadan and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow induced Microstructural Evolution in Colloidal Particulate Gels written by Priya Varadan and published by . This book was released on 2002 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Rheology written by and published by . This book was released on 2008 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes abstracts from the Journal of the Society of Rheology, Japan.
Download or read book Response of Dilute Colloidal Gels to Shear Deformation written by Bharath Rajaram and published by . This book was released on 2011 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal gels are often subject to transient shear deformation during steps involved in their manufacturing, processing and handling. Understanding the microstructural and rheological implications of this deformation is of critical importance to a wide host of technologies that use these materials as feedstock, including the food processing and ceramic industries, and in emerging technologies such as direct write assembly. For these systems, the rheology and microstructural evolution are coupled by a circular interplay between the interparticle and hydrodynamic interactions at the micro- and nano- scale, and the macroscopically imposed stresses or strains making their predictions from theoretical models difficult. In this study, we directly probe the shear-induced evolution of the microstructure, dynamics and rheology of dilute, depletion-induced colloidal gels suspended in a refractive index- and density- matched solvent mixture. The real time response of the gel network to shear flow is quantified using a fast scanning confocal microscope coupled with a custom-built cone-and-plate shear cell. Our results capture, for the first time in real space, local dynamic and structural information during the gel's evolution to the applied shear. Broadly, the particle dynamics evolve through three prominent regimes: (i) a period of movement immediately following the imposition of shear, (ii) an intermediate interval characterized by a predominantly immobilized microstructure, albeit with sporadic local rearrangements and, (iii) a final regime consisting of disconnected clusters advecting along the shear flow direction with a plug-like flow profile. Here, the intermediate interval is associated with transient heterogeneities in the particle dynamics and the appearance of chain-like domains oriented along the extensional axis of the flow field. We also unveil a secondary yield point previously unforseen in such dilute systems. Remarkably, the onset of gel rupture is progressively delayed at positions closer to the center of the cone; the microstructural and rheological signatures of this behavior are interrogated and a unified theory accounting for hydrodynamic contributions is proposed. Finally, the terminal microstructure of the sheared gels is investigated by systematically varying the strength and range of the attractive interactions, and the rate of deformation, and the implications on the phase behavior of colloidal gels are discussed.
Download or read book Theory and Applications of Colloidal Suspension Rheology written by Norman J. Wagner and published by Cambridge University Press. This book was released on 2021-04-15 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential text on the practical application and theory of colloidal suspension rheology, written by an international coalition of experts.
Download or read book Encyclopedia of Complexity and Systems Science written by and published by Springer. This book was released on 2009-06-26 with total page 10398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia provides an authoritative single source for understanding and applying the concepts of complexity theory together with the tools and measures for analyzing complex systems in all fields of science and engineering. It links fundamental concepts of mathematics and computational sciences to applications in the physical sciences, engineering, biomedicine, economics and the social sciences.
Download or read book Rheology written by Frederick R. Eirich and published by Academic Press. This book was released on 2014-05-12 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology: Theory and Applications, Volume 5 focuses on overtly fluid behavior of polymers, including the theory of large deformations, thermoelastic effects, elastic phenomena observed during the extrusion of polymeric melts, and theories of the structure of liquids and glasses. The selection first elaborates on the application of large deformation theory to the thermomechanical behavior of rubberlike polymers and unstable flow of molten polymers. Discussions focus on the mechanism proposed for unstable flow, ripple and associated effects, direct observation of waviness phenomena, empirical behavior of porous, unfilled, and filled rubberlike polymers, and problems connected with the interpretation of mechanical response parameters. The text then examines elasticity effects in polymer extrusion and strength and extensibility of elastomers. The publication takes a look at free volume and polymer rheology and studies of the deformation of crystalline polymers. Topics include the contribution of the two orientation processes to the birefringence, deformation of superstructure, rate of orientation of crystalline regions, free volume and physical state, glass transition and free volume, and reappraisal of time-temperature superposition. The manuscript also elaborates on the deformation and dissipative processes in high polymeric solids and the thermodynamics of deformation. The selection is a vital source of data for researchers interested in the theories and applications of rheology.
Download or read book Product Design and Engineering written by Ulrich Bröckel and published by John Wiley & Sons. This book was released on 2013-08-02 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the whole value chain - from product requirements and properties via process technologies and equipment to real-world applications - this reference represents a comprehensive overview of the topic. The editors and majority of the authors are members of the European Federation of Chemical Engineering, with backgrounds from academia as well as industry. Therefore, this multifaceted area is highlighted from different angles: essential physico-chemical background, latest measurement and prediction techniques, and numerous applications from cosmetic up to food industry. Recommended reading for process, pharma and chemical engineers, chemists in industry, and those working in the pharmaceutical, food, cosmetics, dyes and pigments industries.
Download or read book Colloidal Suspension Rheology written by Jan Mewis and published by Cambridge University Press. This book was released on 2012 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in an accessible and introductory manner, this is the first book devoted to the comprehensive study of colloidal suspensions.
Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge, driven both by the development of mature technologies, e.g. latexes for coatings, as well as the advancement of new materials and applications, such as building blocks for 2D/3D structures and medicine. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field. Based on a specialised course by the editors, this book provides the reader with an invaluable single source of reference. The first section describes formation, explaining basic properties of emulsions and dispersion polymerization, microfluidic approaches to produce polymer-based colloids and formation via directed self-assembly. The next section details characterisation methodologies from microscopy and small angle scattering, to surface science and simulations. The final chapters close with applications, including Pickering emulsions and molecular engineering for materials development. A comprehensive guide to polymer colloids, with contributions by leaders in their respective areas, this book is a must-have for researchers and practitioners working across polymers, soft matter and chemical and molecular engineering.
Download or read book Introduction to Sol Gel Processing written by Alain C. Pierre and published by Springer Nature. This book was released on 2020-03-10 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad, general introduction to the processing of Sol-Gel technologies. This updated volume serves as a general handbook for researchers and students entering the field. This new edition provides updates in fields that have undergone rapid developments, such as Ceramics, Catalysis, Chromatropgraphy, biomaterials, glass science, and optics. It provides a simple, compact resource that can also be used in graduate-level materials science courses.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Soft Matter written by Ian W. Hamley and published by John Wiley & Sons. This book was released on 2013-03-18 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to this exciting and relativelynew subject with chapters covering natural and synthetic polymers,colloids, surfactants and liquid crystals highlighting the many andvaried applications of these materials. Written by an expert in thefield, this book will be an essential reference for people workingin both industry and academia and will aid in understanding of thisincreasingly popular topic. Contains a new chapter on biological soft matter Newly edited and updated chapters including updated coverageof recent aspects of polymer science. Contain problems at the end of each chapter to facilitateunderstanding
Download or read book The Perfect Slime written by Hans-Curt Flemming and published by IWA Publishing. This book was released on 2016-09-15 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Perfect Slime presents the latest state of knowledge and all aspects of the Extracellular Polymeric Substances, (EPS) matrix – from the ecological and health to the antifouling perspectives. The book brings together all the current material in order to expand our understanding of the functions, properties and characteristics of the matrix as well as the possibilities to strengthen or weaken it. The EPS matrix represents the immediate environment in which biofilm organisms live. From their point of view, this matrix has paramount advantages. It allows them to stay together for extended periods and form synergistic microconsortia, it retains extracellular enzymes and turns the matrix into an external digestion system and it is a universal recycling yard, it protects them against desiccation, it allows for intense communication and represents a huge genetic archive. They can remodel their matrix, break free and eventually, they can use it as a nutrient source. The EPS matrix can be considered as one of the emergent properties of biofilms and are a major reason for the success of this form of life. Nevertheless, they have been termed the “black matter of biofilms” for good reasons. First of all: the isolation methods define the results. In most cases, only water soluble EPS components are investigated; insoluble ones such as cellulose or amyloids are much less included. In particular in environmental biofilms with many species, it is difficult to impossible isolate, separate the various EPS molecules they are encased in and to define which species produced which EPS. The regulation and the factors which trigger or inhibit EPS production are still very poorly understood. Furthermore: bacteria are not the only microorganisms to produce EPS. Archaea, Fungi and algae can also form EPS. This book investigates the questions, What is their composition, function, dynamics and regulation? What do they all have in common?
Download or read book Ionic Liquids written by Mark B. Shiflett and published by ACS Symposium. This book was released on 2018-07-02 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to provide an update on some of the latest research and applications in the broad field of ionic liquids. This volume spans research and development activities ranging from fundamental and experimental investigations to commercial applications. A brief history of the field is included, as well as both new developments and reviews organized in the general topical areas of applications, materials, biomass processing, and fundamental studies. This book attempts to propel the field forward by bringing together contributions from some of the foremost researchers on ionic liquids. Recent products and new large-scale processes using ionic liquids, both in operation and being announced, indicate that an exciting new chapter in this field is about to begin. The authors summarize some of the history, applications, conferences, books, databases, issues related to data quality and toxicity for researchers working in the field of ionic liquids and includes an overview for each proceeding chapter with an introduction about the authors.
Download or read book Compendium of Polymer Terminology and Nomenclature written by Richard G Jones and published by Royal Society of Chemistry. This book was released on 2009-01-19 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUPAC system of polymer nomenclature has aided the generation of unambiguous names that re ect the historical development of chemistry. However, the explosion in the circulation of information and the globalization of human activities mean that it is now necessary to have a common language for use in legal situations, patents, export-import regulations, and environmental health and safety information. Rather than recommending a ‘unique name’ for each structure, rules have been developed for assigning ‘preferred IUPAC names’, while continuing to allow alternatives in order to preserve the diversity and adaptability of nomenclature. Compendium of Polymer Terminology and Nomenclature is the only publication to collect the most important work on this subject into a single volume. It serves as a handy compendium for scientists and removes the need for time consuming literature searches. One of a series issued by the International Union of Pure and Applied Chemistry (IUPAC), it covers the terminology used in many and varied aspects of polymer science as well as the nomenclature of several di erent types of polymer including regular and irregular single-strand organic polymers, copolymers and regular double-strand (ladder and spiro) organic polymers.
Download or read book Gels Structures Properties and Functions written by Masayuki Tokita and published by Springer. This book was released on 2009-10-08 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes 28 contributions to the Toyoichi Tanaka Memorial Symposium on Gels which took place at Arcadia Ichigaya on September 10th-12th, 2008. The contributions from leading scientists cover a broad spectrum of topics concerning: Structure and Functional Properties of Gels - Swelling of Gels - Industrial and Biomedical Application. The symposium was held in the style of Faraday Discussions, which stimulated the active discussion. After the symposium, each manuscript was rewritten based on the discussion and the critical review. Since the research on gels is becoming more and more important both for academia and industry, this book will be an essential source of information.
