Download or read book Balancing of Rigid and Flexible Rotors written by Neville F. Rieger and published by . This book was released on 1986 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Balancing of High Speed Machinery written by Mark S. Darlow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern rotating machinery, particularly turbomachinery, is frequently being designed to operate at higher speeds than in the past. Consequently, there is an increased need to balance high-speed rotors. The purpose of this book is to provide the engineering student or practicing engineer with a single, complete reference on high-speed rotor balancing. To this end, a detailed analytical background and practical application procedures are presented for each of the principal high-speed rotor balancing methods, i.e. modal balancing, influence coefficient balancing and the Unified Balancing Approach. This information is supplemented and supported through a presentation of the theoretical development of synchronous rotor vibration and a brief overview of rigid rotor balancing techniques and machines. This is the first time this material is available in a single, concise volume, together with detailed descriptions of application procedures.
Download or read book Practical Balancing of Rotating Machinery written by Derek Norfield and published by Elsevier. This book was released on 2011-04-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotating machinery (eg pumps, motors, compressors) is normally manufactured to precise measurements but there comes a point when the costs of manufacture mean that further precision is not cost-effective and thus any slight imbalance inherent in the machine will need to be attended to after manufacture. When such machinery is in operation, often at very high speeds of thousands of revs per minute, any imbalance will set up vibration and often noise. In addition, such imbalance will cause extra wear and loss of efficiency in the machine. The answer is to balance the affected parts of the machine so that it operates smoothly and efficiently.This book is a practical account of such balancing techniques e.g how to balance a rotor, how to set up and verify performance of a balancing machine, and procedures for on-site balancing. In addition, other common causes of vibration will be covered e.g. misalignment, bad bearings and looseness.This book is the distillation of a successful course run by the author and developed over 20 years. University engineering departments do not teach balancing techniques beyond the very basic, and there is a need for educators and engineers to have a practical book available on the topic.·A practical book which will help the reader understand the importance of balance in today's high technology world·Outlines the history of dynamic balancing and other vibration reduction techniques·Profusely illustrated throughout
Download or read book Rotor Dynamics written by J. S. Rao and published by New Age International. This book was released on 1996 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third Revised And Enlarged Edition Of The Book Presents An In-Depth Study Of The Dynamic Behaviour Of Rotating And Reciprocating Machinery. It Evolved Out Of Lectures Delivered At Different Universities Over The Last Two Decades. The Book Deals With Torsional And Bending Vibrations Of Rotors, Stability Aspects, Balancing And Condition Monitoring. Closed Form Solutions Are Given Wherever Possible And Parametric Studies Presented To Give A Clear Understanding Of The Subject. Transfer Matrix Methods Is Extensively Used For General Class Of Rotors For Both Bending And Torsional Vibrations.Special Attentions Are Given To Transient Analysis Of The Rotors Which Is Becoming An Essential Part Of The Design Of High Speed Machinery. Systems With Fluid Film Bearings, Cracked Rotors And Two Spool Rotors Are Also Presented.A First Course On Theory Of Vibration Is A Prerequisite To This Study. Analysis Used Is Fairly Simple, But Sufficiently Advanced To The Requisite Level Of Predicting Practical Observations. As Far As Possible, Practical Examples Are Illustrated, So That The Book Is Also Useful To Practising Engineers.A Special Feature Of This Book Is Diagnostics Of Rotating Machinery Using Vibration Signature Analysis And Application Of Expert Systems To A Field Engineer In Trouble Shooting Work.
Download or read book Dynamics of Rotating Machines written by M. I. Friswell and published by Cambridge University Press. This book was released on 2010-03-31 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables engineers to understand the dynamics of rotating machines, from basic explanations to detailed numerical models and analysis.
Download or read book Flexible Rotor Balancing by the Influence Coefficient Method written by Juergen M. Tessarzik and published by . This book was released on 1975 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Rotor bearing System Dynamics written by and published by . This book was released on 1972 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machinery Vibration Balancing Special Reprint Edition written by Victor Wowk and published by McGraw Hill Professional. This book was released on 1998-10-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables you to measure, isolate, and reduce rotating component's vibration, resonance, or misalignment problem. This book helps you to balance everything from ceiling fans to turbine engines, and select and apply balancing sensors and systems for single-plane and two-plane balancing and overhung and flexible-rotor balancing.
Download or read book Rotordynamics of Turbomachinery written by John M. Vance and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the rotordynamic considerations that are important to the successful design or troubleshooting of a turbomachine. Shows how bearing design, fluid seals, and rotor geometry affect rotordynamic behavior (vibration, shaft whirling, bearing loads, and critical speeds), and describes two successful computational methods for rotordynamic analysis in terms that can be understood by practicing engineers. Gives descriptive accounts of the state of the art in several areas of the field and presents important mathematical or computational concepts, describing equations and formulas in physical terms for better understanding. Also offers tips for troubleshooting unstable machines and provides practical interpretations of vibration measurements.
Download or read book Rotor Systems written by Rajiv Tiwari and published by CRC Press. This book was released on 2017-11-22 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to give a basic understanding of rotor dynamics phenomena with the help of simple rotor models and subsequently, the modern analysis methods for real life rotor systems. This background will be helpful in the identification of rotor-bearing system parameters and its use in futuristic model-based condition monitoring and, fault diagnostics and prognostics. The book starts with introductory material for finite element methods and moves to linear and non-linear vibrations, continuous systems, vibration measurement techniques, signal processing and error analysis, general identification techniques in engineering systems, and MATLAB analysis of simple rotors. Key Features: • Covers both transfer matrix methods (TMM) and finite element methods (FEM) • Discusses transverse and torsional vibrations • Includes worked examples with simplicity of mathematical background and a modern numerical method approach • Explores the concepts of instability analysis and dynamic balancing • Provides a basic understanding of rotor dynamics phenomena with the help of simple rotor models including modern analysis methods for real life rotor systems.
Download or read book 10th International Conference on Vibrations in Rotating Machinery written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2012-09-11 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the 10th International Conference on Vibrations in Rotating Machinery. This conference, first held in 1976, has defined and redefined the state-of-the-art in the many aspects of vibration encountered in rotating machinery. Distinguished by an excellent mix of industrial and academic participation achieved, these papers present the latest methods of theoretical, experimental and computational rotordynamics, alongside the current issues of concern in the further development of rotating machines. Topics are aimed at propelling forward the standards of excellence in the design and operation of rotating machines. - Presents latest methods of theoretical, experimental and computational rotordynamics - Covers current issues of concern in the further development of rotating machines
Download or read book Machinery Vibration Measurement and Analysis written by Victor Wowk and published by McGraw Hill Professional. This book was released on 1991-07-22 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows how to use state-of-the-art instrumentation - transducers and fast fourier transform (FFT) specturm analyzers - to monitor machine conditions using the vibration signature.
Download or read book Dynamics of Rotating Systems written by Giancarlo Genta and published by Springer Science & Business Media. This book was released on 2007-01-04 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an up-to-date review of rotor dynamics, dealing with basic topics as well as a number of specialized topics usually available only in journal articles Unlike other books on rotordynamics, this treats the entire machine as a system, with the rotor as just one component
Download or read book Advances on Analysis and Control of Vibrations written by Mauricio Zapateiro and published by BoD – Books on Demand. This book was released on 2012-09-05 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration is a phenomenon that we can perceive in many systems. Their effects are as diverse as the personal discomfort that can produce the unevenness of a road or the collapse of a building or a bridge during an earthquake. This book is a compendium of research works on vibration analysis and control. It goes through new methodologies that help us understand and mitigate this phenomenon. This book is divided into two sections. The first one is devoted to new advances on vibration analysis while the second part is a series of case studies that illustrate novel techniques on vibration control. The applications are varied and include areas such as vehicle suspension systems, wind turbines and civil engineering structures.
Download or read book Advances in Mechanism and Machine Science written by Tadeusz Uhl and published by Springer. This book was released on 2019-06-13 with total page 4203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 15th IFToMM World Congress, which was held in Krakow, Poland, from June 30 to July 4, 2019. Having been organized every four years since 1965, the Congress represents the world’s largest scientific event on mechanism and machine science (MMS). The contributions cover an extremely diverse range of topics, including biomechanical engineering, computational kinematics, design methodologies, dynamics of machinery, multibody dynamics, gearing and transmissions, history of MMS, linkage and mechanical controls, robotics and mechatronics, micro-mechanisms, reliability of machines and mechanisms, rotor dynamics, standardization of terminology, sustainable energy systems, transportation machinery, tribology and vibration. Selected by means of a rigorous international peer-review process, they highlight numerous exciting advances and ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book Rotor and Structural Dynamics of Turbomachinery written by Raj Subbiah and published by Springer. This book was released on 2018-01-16 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides engineers and scientists with practical fundamentals for turbomachinery design. It presents a detailed analysis of existing procedures for the analysis of rotor and structure dynamics, while keeping mathematical equations to a minimum. Specific terminologies are used for rotors and structures, respectively, allowing the readers to clearly distinguish between the two. Further, the book describes the essential concepts needed to understand rotor failure modes due to lateral and torsional oscillations. It guides the reader from simple single-degree-of-freedom models to the most complex multi-degree-of-freedom systems, and provides useful information concerning steel pedestal stiffness degradation and other structural issues. Fluid-film bearing types and their dynamical behavior are extensively covered and discussed in the context of various turbomachinery applications. The book also discusses shaft alignment and rotor balancing from a practical point of view, providing readers with essential information to help them solve practical problems. As the main body of the book focuses on the diagnostics and description of case studies addressing the most pressing practical issues, together with their successful solutions, it offers a valuable reference guide, helping field engineers manage day-to-day issues with turbomachinery.
Download or read book Vibrations of Rotating Machinery written by Osami Matsushita and published by Springer. This book was released on 2017-05-22 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book opens with an explanation of the vibrations of a single degree-of-freedom (dof) system for all beginners. Subsequently, vibration analysis of multi-dof systems is explained by modal analysis. Mode synthesis modeling is then introduced for system reduction, which aids understanding in a simplified manner of how complicated rotors behave. Rotor balancing techniques are offered for rigid and flexible rotors through several examples. Consideration of gyroscopic influences on the rotordynamics is then provided and vibration evaluation of a rotor-bearing system is emphasized in terms of forward and backward whirl rotor motions through eigenvalue (natural frequency and damping ratio) analysis. In addition to these rotordynamics concerning rotating shaft vibration measured in a stationary reference frame, blade vibrations are analyzed with Coriolis forces expressed in a rotating reference frame. Other phenomena that may be assessed in stationary and rotating reference frames include stability characteristics due to rotor internal damping and instabilities due to asymmetric shaft stiffness and thermal unbalance behavior.
