Download or read book Flexible pressure and temperature sensors towards e skin material mechanism structure and fabrication written by Shengrui Tian and published by OAE Publishing Inc.. This book was released on 2023-08-07 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic skin (E-skin) has gained significant attention due to its potential applications in the Internet of Things (IoT), artificial intelligence (AI), and flexible multi-sensing systems. Mimicking human skin, e-skin sensing devices can be employed in various scenarios. Among the most important sensing elements for tactile e-skin sensors are pressure and temperature sensors, which have increasingly garnered research interest over the past few decades. However, the design and fabrication of advanced pressure and temperature sensors can be challenging owing to complications such as signal interference, complex mechanism integration, and structural design issues. This review provides an overview of flexible pressure and temperature sensors used in e-skin, covering four main perspectives: material selection, mechanism integration, structural design, and manufacturing methods. The materials of different elements in the entire sensing system are comprehensively discussed, along with single and compound mechanisms of pressure and temperature sensing. Pressure and temperature sensors are divided into two types based on their electric output signals, which are exemplified in detail. The manufacturing methods used to fabricate these sensors, including printing methods, are outlined. Lastly, a summary of the future challenges faced by flexible pressure and temperature sensors used in e-skin is presented.

Download or read book Organic Sensors written by Eduardo Garcia-Breijo and published by IET. This book was released on 2016-11-25 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Sensors: Materials and Applications features contributions from an international panel of leading researchers in organic electronics and their applications as sensors. It reviews the state-of-the-art in the use of organic electronic materials such as organic semiconductors, conducting polymers, chemically functionalized materials, and composite materials as physical, chemical and biomedical sensors in a variety of application settings. Topics covered include organic semiconductors for chemical and physical sensing; conducting polymers in sensor applications; chemically functionalized organic semiconductors for highly selective sensing; composite organic-inorganic sensors; artificial skin applications; organic thin film transistor strain gauges for biomedical applications; OTFT infrared sensors for touchless human-machine interaction; smart fabric sensors and e-textile technologies; image capture with organic sensors; organic gas sensors and electronic noses; electrolyte gated organic transistors for biochemical sensing; ion-selective organic electrochemical transistors; DNA biosensors; metabolic organic sensors; and conductive polymer-based sensors for biomedical applications. This book is cross-disciplinary in its approach and combines electronic engineering, materials science, chemistry, physics and healthcare technology. It will be an invaluable resource for researchers working in sensors and organic electronics.

Download or read book Printed Flexible Sensors written by Anindya Nag and published by Springer. This book was released on 2019-03-11 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the design, fabrication and implementation of flexible printed sensors. It explores a range of materials for developing the electrode and substrate parts of the sensors, on the basis of their electrical and mechanical characteristics. The sensors were processed using laser cutting and 3D printing techniques, and the sensors developed were employed in a number of healthcare, environmental and industrial applications, including: monitoring of physiological movements, respiration, salinity and nitrate measurement, and tactile sensing. The type of sensor selected for each application depended on its dimensions, robustness and sensitivity. The sensors fabricated were also embedded in an IoT-based system, allowing them to be integrated into real-time applications.

Download or read book Laser induced Graphene written by Ruquan Ye and published by . This book was released on 2020-11-30 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: LIG is a revolutionary technique that uses a common CO2 infrared laser scriber, like the one used in any machine shop, for the direct conversion of polymers into porous graphene under ambient conditions. This technique combines the preparation and patterning of 3D graphene in a single step, without the use of wet chemicals. The ease in the structural engineering and excellent mechanical properties of the 3D graphene obtained have made LIG a versatile technique for applications across many fields. This book compiles cutting-edge research on LIG by different research groups all over the world. It discusses the strategies that have been developed to synthesize and engineer graphene, including controlling its properties such as porosity, composition, and surface characteristics. The authors are pioneers in the discovery and development of LIG and the book will appeal to anyone involved in nanotechnology, chemistry, environmental sciences, and device development, especially those with an interest in the synthesis and applications of graphene-based materials.

Download or read book Graphene Bioelectronics written by Ashutosh Tiwari and published by Elsevier. This book was released on 2017-11-22 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene Bioelectronics covers the expending field of graphene biomaterials, a wide span of biotechnological breakthroughs, opportunities, possibilities and challenges. It is the first book that focuses entirely on graphene bioelectronics, covering the miniaturization of bioelectrode materials, bioelectrode interfaces, high-throughput biosensing platforms, and systemic approaches for the development of electrochemical biosensors and bioelectronics for biomedical and energy applications. The book also showcases key applications, including advanced security, forensics and environmental monitoring. Thus, the evolution of these scientific areas demands innovations in crosscutting disciplines, starting from fabrication to application. This book is an important reference resource for researchers and technologists in graphene bioelectronics—particularly those working in the area of harvest energy biotechnology—employing state-of-the-art bioelectrode materials techniques. - Offers a comprehensive overview of state-of-art research on graphene bioelectronics and their potential applications - Provides innovative fabrication strategies and utilization methodologies, which are frequently adopted in the graphene bioelectronics community - Shows how graphene can be used to make more effective energy harvesting devices

Download or read book Robotic Tactile Sensing written by Ravinder S. Dahiya and published by Springer Science & Business Media. This book was released on 2012-07-29 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future robots are expected to work closely and interact safely with real-world objects and humans alike. Sense of touch is important in this context, as it helps estimate properties such as shape, texture, hardness, material type and many more; provides action related information, such as slip detection; and helps carrying out actions such as rolling an object between fingers without dropping it. This book presents an in-depth description of the solutions available for gathering tactile data, obtaining aforementioned tactile information from the data and effectively using the same in various robotic tasks. The efforts during last four decades or so have yielded a wide spectrum of tactile sensing technologies and engineered solutions for both intrinsic and extrinsic touch sensors. Nowadays, new materials and structures are being explored for obtaining robotic skin with physical features like bendable, conformable, and stretchable. Such features are important for covering various body parts of robots or 3D surfaces. Nonetheless, there exist many more hardware, software and application related issues that must be considered to make tactile sensing an effective component of future robotic platforms. This book presents an in-depth analysis of various system related issues and presents the trade-offs one may face while developing an effective tactile sensing system. For this purpose, human touch sensing has also been explored. The design hints coming out of the investigations into human sense of touch can be useful in improving the effectiveness of tactile sensory modality in robotics and other machines. Better integration of tactile sensors on a robot’s body is prerequisite for the effective utilization of tactile data. The concept of semiconductor devices based sensors is an interesting one, as it allows compact and fast tactile sensing systems with capabilities such as human-like spatio-temporal resolution. This book presents a comprehensive description of semiconductor devices based tactile sensing. In particular, novel Piezo Oxide Semiconductor Field Effect Transistor (POSFET) based approach for high resolution tactile sensing has been discussed in detail. Finally, the extension of semiconductors devices based sensors concept to large and flexile areas has been discussed for obtaining robotic or electronic skin. With its multidisciplinary scope, this book is suitable for graduate students and researchers coming from diverse areas such robotics (bio-robots, humanoids, rehabilitation etc.), applied materials, humans touch sensing, electronics, microsystems, and instrumentation. To better explain the concepts the text is supported by large number of figures.

Download or read book Principles of Voice Production written by Ingo R. Titze and published by . This book was released on 2000 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: FEATURES

Download or read book Smart Sensor Systems written by Gerard Meijer and published by John Wiley & Sons. This book was released on 2014-04-02 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from an internationally-renowned group of experts, this book uses a multidisciplinary approach to review recent developments in the field of smart sensor systems, covering important system and design aspects. It examines topics over the whole range of sensor technology from the theory and constraints of basic elements, physics and electronics, up to the level of application-orientated issues. Developed as a complementary volume to ‘Smart Sensor Systems’ (Wiley 2008), which introduces the basics of smart sensor systems, this volume focuses on emerging sensing technologies and applications, including: State-of-the-art techniques for designing smart sensors and smart sensor systems, including measurement techniques at system level, such as dynamic error correction, calibration, self-calibration and trimming. Circuit design for sensor systems, such as the design of precision instrumentation amplifiers. Impedance sensors, and the associated measurement techniques and electronics, that measure electrical characteristics to derive physical and biomedical parameters, such as blood viscosity or growth of micro-organisms. Complete sensor systems-on-a-chip, such as CMOS optical imagers and microarrays for DNA detection, and the associated circuit and micro-fabrication techniques. Vibratory gyroscopes and the associated electronics, employing mechanical and electrical signal amplification to enable low-power angular-rate sensing. Implantable smart sensors for neural interfacing in bio-medical applications. Smart combinations of energy harvesters and energy-storage devices for autonomous wireless sensors. Smart Sensor Systems: Emerging Technologies and Applications will greatly benefit final-year undergraduate and postgraduate students in the areas of electrical, mechanical and chemical engineering, and physics. Professional engineers and researchers in the microelectronics industry, including microsystem developers, will also find this a thorough and useful volume.

Download or read book Triboelectric Nanogenerators written by Zhong Lin Wang and published by Springer. This book was released on 2016-08-17 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces an innovative and high-efficiency technology for mechanical energy harvesting. The book covers the history and development of triboelectric nanogenerators, basic structures, working principles, performance characterization, and potential applications. It is divided into three parts: Part A illustrates the fundamental working modes of triboelectric nanogenerators with their prototype structures and theoretical analysis; Part B and Part C introduce two categories of applications, namely self-powered systems and self-powered active sensors. The book will be an ideal guide to scientists and engineers beginning to study triboelectric nanogenerators or wishing to deepen their knowledge of the field. Readers will be able to place the technical details about this technology in context, and acquire the necessary skills to reproduce the experimental setups for fabrication and measurement.

Download or read book Semiconductor Gas Sensors written by Raivo Jaaniso and published by Woodhead Publishing. This book was released on 2019-09-24 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Gas Sensors, Second Edition, summarizes recent research on basic principles, new materials and emerging technologies in this essential field. Chapters cover the foundation of the underlying principles and sensing mechanisms of gas sensors, include expanded content on gas sensing characteristics, such as response, sensitivity and cross-sensitivity, present an overview of the nanomaterials utilized for gas sensing, and review the latest applications for semiconductor gas sensors, including environmental monitoring, indoor monitoring, medical applications, CMOS integration and chemical warfare agents. This second edition has been completely updated, thus ensuring it reflects current literature and the latest materials systems and applications. - Includes an overview of key applications, with new chapters on indoor monitoring and medical applications - Reviews developments in gas sensors and sensing methods, including an expanded section on gas sensor theory - Discusses the use of nanomaterials in gas sensing, with new chapters on single-layer graphene sensors, graphene oxide sensors, printed sensors, and much more

Download or read book Additive Manufacturing with Functionalized Nanomaterials written by Sunpreet Singh and published by Elsevier. This book was released on 2021-04-09 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The greatest benefits of nanoscale additive manufacturing lie in biomedicine, smart devices/sensors, energy harvesting, aerospace, and manufacturing. This book explores the recent applications of functionalized nanomaterials-based additive manufacturing to benefit different manufacturing domains, including design and process aspects, as well as outlining major application areas. This book summarizes recent progress of functionalized nanomaterials-based additive manufacturing on both an experimental and a theoretical model level. Though nanomaterials can be fabricated by bottom-up and top-down approaches (techniques include lithography, photolithography, and micro-machining), the applications of additive manufacturing processes are increasing at an exponential rate and therefore, the demand for high-performance materials has been greatly increasing. Recent applications covered in this book include biomedicine, aerospace, automobile, waste recycling, and energy storage devices. Environmental, regulatory and safety issues are also discussed. This book is an important reference source for materials scientists and engineers who are seeking to improve their understanding of how functionalized nanomaterials are playing an increasingly important role in the additive manufacturing process. Brings together recent innovations and practices of nanomaterials in additive manufacturing processes Outlines major nanomaterials-based additive manufacturing techniques Discusses major applications in a range of industry sectors, including in energy, automotive and biomedicine

Download or read book Handbook of Modern Sensors written by Jacob Fraden and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have passed since the publication of the previous edition of this book. During that time, sensor technologies have made a remarkable leap forward. The sensitivity of the sensors became higher, the dimensions became smaller, the sel- tivity became better, and the prices became lower. What have not changed are the fundamental principles of the sensor design. They are still governed by the laws of Nature. Arguably one of the greatest geniuses who ever lived, Leonardo Da Vinci, had his own peculiar way of praying. He was saying, “Oh Lord, thanks for Thou do not violate your own laws. ” It is comforting indeed that the laws of Nature do not change as time goes by; it is just our appreciation of them that is being re?ned. Thus, this new edition examines the same good old laws of Nature that are employed in the designs of various sensors. This has not changed much since the previous edition. Yet, the sections that describe the practical designs are revised substantially. Recent ideas and developments have been added, and less important and nonessential designs were dropped. Probably the most dramatic recent progress in the sensor technologies relates to wide use of MEMS and MEOMS (micro-electro-mechanical systems and micro-electro-opto-mechanical systems). These are examined in this new edition with greater detail. This book is about devices commonly called sensors. The invention of a - croprocessor has brought highly sophisticated instruments into our everyday lives.

Download or read book Carbon Nanotube Electronics written by Ali Javey and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete overview of the field of carbon nanotube electronics. It covers materials and physical properties, synthesis and fabrication processes, devices and circuits, modeling, and finally novel applications of nanotube-based electronics. The book introduces fundamental device physics and circuit concepts of 1-D electronics. At the same time it provides specific examples of the state-of-the-art nanotube devices.

Download or read book Piezoelectricity written by Walter Heywang and published by Springer Science & Business Media. This book was released on 2008-11-14 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered in 1880, piezoelectric materials play a key role in an innovative market of several billions of dollars. Recent advances in applications derive from new materials and their development, as well as to new market requirements. With the exception of quartz, ferroelectric materials are used for they offer both high efficiency and sufficient versatility to meet adequately the multidimensional requirements for application. Consequently, strong emphasis is placed on tailoring materials and technology, whether one deals with single crystals, ceramics or plastic materials. Tailoring requires a basic understanding of both physical principles and technical possibilities and limitations. This report elucidates these developments by a broad spectrum of examples, comprising ultrasound in medicine and defence industry, frequency control, signal processing by SAW-devices, sensors, actuators, including novel valves for modern motor management. It delivers a mutual fertilization of technology push and market pull that should be of interest not only to materials scientists or engineers but also to managers who dedicate themselves to a sound future-oriented R&D policy.

Download or read book Smart Textiles Production written by Inga Gehrke and published by MDPI. This book was released on 2019-04-11 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research field of smart textiles is currently witnessinga rapidly growing number of applicationsintegrating intelligent functions in textile substrates.With an increasing amount of new developed productprototypes, the number of materials used and that ofspecially designed production technologies are alsogrowing.This book is intended to provide an overview of materials,production technologies, and product conceptsto different groups concerned with smart textiles. Itwill help designers to understand the possibilities ofsmart textile production, so that they are enabled todesign this type of products. It will also help textileand electronics manufacturers to understand whichproduction technologies are suitable to meet certainproduct requirements.After an introduction to smart textiles and their marketrelevance, different material types for functionaltextiles are described along with their properties,application areas, and product examples. Specialattention is given to materials for the realization ofelectrical conductivity in textiles, as these are crucialfor the following overview on sensor and productiontechnologies. Next, textile-based sensors areintroduced. While numerous textile-based sensors,ranging from sensing fibers to coatings and three-dimensionalstructures, have been developed, theirspecific properties and usage are not clear. Bosowskiet al. have suggested a structure for a classified catalogueas knowledge basis to support the smart textileproduct development process. This chapter developsthe classification further and implements it in a catalogueto be used by practitioners from research andindustry when developing and designing textiles withsensing capabilities. The full catalogue is reported inthe appendix. The third part of the book starts by describingthe state of the art of research on productiontechnologies for the integration of conductive materialsinto textile substrates, which include weaving,knitting, embroidering, printing, without mentioningspecific products. Different variants of each technologyare presented. Additionally, associated technologiesto integrate electrical components in textile substratesare outlined. This part closes by reporting thecurrent state of research on automated productionsystems for electronics integration into textiles. In thelast part of the book, product and design conceptsfor smart textiles are evaluated along the example oftouchpads.

Download or read book Cellular and Molecular Neurophysiology written by Constance Hammond and published by Academic Press. This book was released on 2014-12-30 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellular and Molecular Neurophysiology, Fourth Edition, is the only up-to-date textbook on the market that focuses on the molecular and cellular physiology of neurons and synapses. Hypothesis-driven rather than a dry presentation of the facts, the book promotes a real understanding of the function of nerve cells that is useful for practicing neurophysiologists and students in a graduate-level course on the topic alike. This new edition explains the molecular properties and functions of excitable cells in detail and teaches students how to construct and conduct intelligent research experiments. The content is firmly based on numerous experiments performed by top experts in the field This book will be a useful resource for neurophysiologists, neurobiologists, neurologists, and students taking graduate-level courses on neurophysiology. - 70% new or updated material in full color throughout, with more than 350 carefully selected and constructed illustrations - Fifteen appendices describing neurobiological techniques are interspersed in the text

Download or read book Woven Textile Structure written by B K Behera and published by Elsevier. This book was released on 2010-03-01 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding and predicting the structure and properties of woven textiles is important for achieving specific performance characteristics in various woven applications. Woven textiles are used in a range of products such as apparel, technical and industrial textiles. Woven textile structure: Theory and applications provides comprehensive coverage of the structure, behaviour, modeling and design of woven fabrics and their relevance to the textile industry.The first group of chapters review the fundamental principles of woven fabric structures. Part two discusses the mechanics of woven fabrics, topics include shrinkage in woven fabrics, yarn behaviour in woven fabrics and bending behaviour of woven fabrics. Part three presents a selection of chapters on design engineering of woven fabrics, themes such as textile product design methods and modelling for woven fabric design are covered. A final group of chapters is dedicated to addressing practical applications of woven fabrics.Woven textile structure: Theory and applications is essential reading for designers, engineers and technicians involved in the design, manufacture and use of woven textiles and garments. It will also bebeneficial to academics and students. - Provides comprehensive coverage of the fundamentals of woven fabric structure including geometrical modeling - Examines mechanisms of woven fabric structure featuring shrinkage, buckling, bending and creasing behaviour of textiles - Illustrates mathematical modeling and building predictive models for textile product design incorporating validation and testing