Download or read book Flexibility Measurement in Production Systems written by Sven Rogalski and published by Springer Science & Business Media. This book was released on 2011-05-12 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: The requirements for production systems are constantly changing as a result of changing competitive conditions. This poses a challenge for manufacturers in the various branches of industry and creates an ever-increasing need for flexibility. With this as a background, this book explores the current developments and trends as well as their impact on today’s production systems. It also compares known strategies, concepts and methods used to achieve production flexibility. Similarly, the practical knowledge and current research will be drawn upon and subjected to a sound scientific analysis, through which the technical and organizational flexibility ranges can be measured in their application in a production system. The convenience and usefulness of this concept for manufacturers is substantiated by its implementation in a software tool called ecoFLEX and its practical application, based on extensive examples. This illustrates how flexibility flaws can be quickly identified, classified and properly disposed of using ecoFLEX. This tool helps to close the gap between ERP / PPS systems and digital factory planning tools.
Download or read book Flexibility Measurement in Production Systems written by Sven Rogalski and published by Springer. This book was released on 2011-05-15 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a guide for the application of methods to evaluate the flexibility of production systems. The book explores current developments and trends as well as their impact on today 's production systems. It also compares known strategies, concepts and methods.
Download or read book Manufacturing Systems Theory and Practice written by George Chryssolouris and published by Springer Science & Business Media. This book was released on 2006-02-28 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overviews manufacturing systems from the ground up, following the same concept as in the first edition. Delves into the fundamental building blocks of manufacturing systems: manufacturing processes and equipment. Discusses all topics from the viewpoint of four fundamental manufacturing attributes: cost, rate, flexibility and quality.
Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.
Download or read book Measures of Flexibility for Production Systems written by Brill, Percy H and published by Windsor, Ont. : University of Windsor, Faculty of Business Administration. This book was released on 1987 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Production Systems Management written by Cong Zhao and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation is devoted to the study of flexible production systems. Flexibility refers to the ability to make multiple different products on the same production line. It is a key feature that modern manufacturers seek to serve diversified and volatile customer market. However, most of the existing studies focus on investment cost, flexibility measurement, and scheduling. There is a need for a comprehensive study by taking into account of machine reliability, finite inventory, setup times, and inhomogeneous demands. In this work, we study flexibility in a hierarchical framework: at both the operational level and manufacturing plant planning level. At the operational level, we examine flexible serial production lines with multiple unreliable machines and finite buffers in the views of discrete time and continuous time. We derive closed-form solutions for one- and two-machine systems and develop accurate performance evaluation algorithms for systems at a large scale. To extend the methods, we generalize the analytical study of long flexible production lines to those lines with random setup time during product changeovers. Efficient aggregation algorithms are derived to evaluate line performance of such systems. Using the analytical tools developed, we study system bottlenecks, i.e., the machine and product whose improvement will lead to the largest improvement in system throughput. Various types of bottlenecks are visited, and bottleneck indicators are proposed to avoid complicated calculations and provide managerial insights. The tools are used to develop effective control policies for meeting throughput targets and reducing idle time. At the strategic level, we study production system flexibility measures regarding matching production capacities and demands. Closed-form bounds of demand shortfall, as well as an accurate estimate of the service level, are obtained. Sensitivity analyses of service level on reductions in setup time, downtime and cycle time are carried out, and the impact of new product launch and product correlation on system flexibility, are also investigated. Finally, case studies are introduced to illustrate the applicability of the work in this dissertation. The results of this work provide manufacturing enterprise managers and engineers quantitative tools for flexible system operation management and planning.
Download or read book Characterization and Measurement of Manufacturing Flexibility for Production Planning in High Mix Low Volume Manufacturing System written by Avaneesh Gupta and published by . This book was released on 2004 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Changeable and Reconfigurable Manufacturing Systems written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.
Download or read book Simulation Approach Towards Energy Flexible Manufacturing Systems written by Jan Beier and published by Springer. This book was released on 2017-03-23 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authored monograph provides in-depth analysis and methods for aligning electricity demand of manufacturing systems to VRE supply. The book broaches both long-term system changes and real-time manufacturing execution and control, and the author presents a concept with different options for improved energy flexibility including battery, compressed air and embodied energy storage. The reader will also find a detailed application procedure as well as an implementation into a simulation prototype software. The book concludes with two case studies. The target audience primarily comprises research experts in the field of green manufacturing systems.
Download or read book Agile Manufacturing written by A. Gunasekaran and published by Elsevier. This book was released on 2001-01-25 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agile manufacturing is defined as the capability of surviving and prospering in a competitive environment of continuous and unpredictable change by reacting quickly and effectively to changing markets, driven by customer-designed products and services. Critical to successfully accomplishing AM are a few enabling technologies such as the standard for the exchange of products (STEP), concurrent engineering, virtual manufacturing, component-based hierarchical shop floor control system, information and communication infrastructure, etc.The scope of the book is to present the undergraduate and graduate students, senior managers and researchers in manufacturing systems design and management, industrial engineering and information technology with the conceptual and theoretical basis for the design and implementation of AMS. Also, the book focuses on broad policy directives and plans of agile manufacturing that guide the monitoring and evaluating the manufacturing strategies and their performance. A problem solving approach is taken throughout the book, emphasizing the context of agile manufacturing and the complexities to be addressed.
Download or read book Manufacturing Systems written by George Chryssolouris and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overviews manufacturing systems from the ground up, following the same concept as in the first edition. Delves into the fundamental building blocks of manufacturing systems: manufacturing processes and equipment. Discusses all topics from the viewpoint of four fundamental manufacturing attributes: cost, rate, flexibility and quality.
Download or read book Dynamic and Seamless Integration of Production Logistics and Traffic written by Eberhard Abele and published by Springer. This book was released on 2016-10-14 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contributes a basic framework for and specific insights into interdisciplinary connections between production, logistics, and traffic subsystems. The book is divided into two parts, the first of which presents an overview of interdisciplinarity in value-added networks and freight traffic. This includes an introduction to the topic and a description of an integrated framework of production, logistics, and traffic. Furthermore, it describes the barriers and challenges of interdisciplinary decision-making and project management. In turn, the second part presents domain-specific perspectives on interdisciplinary decision support, exploring domain-specific challenges of interdisciplinary interfaces and requirements for management methods and instruments from the standpoint of production management, logistics management, traffic management, and information technologies.
Download or read book Design and Measurement of Flexibility in Manufacturing Systems written by Sanchoy Das and published by . This book was released on 1990 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.
Download or read book Control and Dynamic Systems V47 Manufacturing and Automation Systems Techniques and Technologies written by C.T. Leonides and published by Elsevier. This book was released on 2012-12-02 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Applications, Volume 47: Manufacturing and Automation Systems: Techniques and Technologies, Part 3 of 5 deals with techniques and technologies in manufacturing and automation systems. This book discusses techniques in modeling and control policies for production networks; effective planning and control of day-to-day operations; evaluation of automated manufacturing systems; the use of Petri Nets in modeling, control and performance analysis of automated manufacturing systems; and concurrent engineering and evaluation of concurrency in engineering design. The final chapter discusses the algorithm for solving allocation problems. This book will provide a uniquely significant reference source for practitioners in the field who want a comprehensive source of techniques with significant applied implications.
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2018-09-03 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.
Download or read book Control Systems written by Vsevolod Kuntsevich and published by CRC Press. This book was released on 2022-09-01 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, a considerable amount of effort has been devoted, both in industry and academia, towards the development of advanced methods of control theory with focus on its practical implementation in various fields of human activity such as space control, robotics, control applications in marine systems, control processes in agriculture and food production.Control Systems: Theory and Applications consists of selected best papers which were presented at XXIV International conference on automatic control “Automatics 2017” (September 13-15, 2017, Kyiv, Ukraine) organized by Ukrainian Association on Automatic Control (National member organization of IFAC – International Federation on Automatic Control) and National University of Life and Environmental Sciences of Ukraine. More than 120 presentations where discussed at the conference, with participation of the scientists from the numerous countries. The book is divided into two main parts, a first on Theory of Automatic Control (5 chapters) and the second on Control Systems Applications (8 chapters). The selected chapters provide an overview of challenges in the area of control systems design, modeling, engineering and implementation and the approaches and techniques that relevant research groups within this area are employing to try to resolve these.This book on advanced methods of control theory and successful cases in the practical implementation is ideal for personnel in modern technological processes automation and SCADA systems, robotics, space and marine industries as well as academic staff and master/research students in computerized control systems, automatized and computer-integrated systems, electrical and mechanical engineering.
