Download or read book Flame Hardening written by Hans Wilhelm Grönegress and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book intended for shop use tries to familiarize the reader with the peculiari ties of a hardening method which due to its many advantages is now in use,many shops. A general knowledge of the principles of hardening and heat treating is presumed. Introduction 1. The name of the process. Flame hardening is a method derived from the old quench hardening and is used for the surface hardening of heat treatable steels. Flame hardening is so named in analogy to flame cutting as the use of a flame is a distinctive feature of this process as opposed to the use of a furnace. 2. Characteristics of flame hardening. In flame hardening the area to be 6 hardened is heated with a burner of large heat capacity (approx. 0.5 · 10 kcaljhr/ meter of flame lengths or 50,000 BTUfhr/inch of flame length) supplied with a mixture of fuel gas and oxygen. The hardening temperature is thus reached in so short a time at the surface that a heat jam is created, that is, more heat is supplied to the surface than can be dissipated to the interior of the workpiece. As the querr ehing takes place immediately after the heating the penetration of the heat to greater depth is prevented and only the outer layer subject to wear is hardened. The core of the workpiece remains unaffected by this heat treatment in cantrast to the other hardening methods where the entire piece is through heated in a furnace.
Download or read book Surface Hardening of Steels written by Joseph R. Davis and published by ASM International. This book was released on 2002-01-01 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation A practical selection guide to help engineers and technicians choose the mot efficient surface hardening techniques that offer consistent and repeatable results. Emphasis is placed on characteristics such as processing temperature, case/coating thickness, bond strength, and hardness level obtained. The advantages and limitations of the various thermochemical, thermal and coating/surface modification technologies are compared
Download or read book Practical Heat Treating written by Jon L. Dossett and published by ASM International. This book was released on 2006-01-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is heat treatment? This book describes heat treating technology in clear, concise, and nontheoretical language. It is an excellent introduction and guide for design and manufacturing engineers, technicians, students, and others who need to understand why heat treatment is specified and how different processes are used to obtain desired properties. The new Second Edition has been extensively updated and revised by Jon. L. Dossett, who has more than forty years of experience in theat treating operations and management. The update adds important information about new processes and process control techniques that have been developed or refined in recent years. Helpfull appendices have been added on decarburization of steels, boost/diffues cycles for carburizing, and process verification.
Download or read book Steel and Its Heat Treatment written by Karl-Erik Thelning and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel and Its Heat Treatment, Second Edition presents information, research, and developments in the heat treatment of steel. The book contains chapters that discuss the fundamentals of TTT-diagrams and hardening mechanisms, injection metallurgy and continuous casting, annealing processes, strain aging and temper brittleness. Existing CCT-diagrams are subjected to critical review, the mechanisms controlling hardenability are discussed, and the detailing of the properties of boron constructional steels, micro-alloyed steels and dual-phase steels are also included. Metallurgists, metal workers, and engineers will find the book very useful.
Download or read book Handbook of Metallurgical Process Design written by George E. Totten and published by CRC Press. This book was released on 2004-05-25 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviewing an extensive array of procedures in hot and cold forming, casting, heat treatment, machining, and surface engineering of steel and aluminum, this comprehensive reference explores a vast range of processes relating to metallurgical component design-enhancing the production and the properties of engineered components while reducing manufacturing costs. It surveys the role of computer simulation in alloy design and its impact on material structure and mechanical properties such as fatigue and wear. It also discusses alloy design for various materials, including steel, iron, aluminum, magnesium, titanium, super alloy compositions and copper.
Download or read book Handbook of Induction Heating written by Valery Rudnev and published by CRC Press. This book was released on 2017-07-14 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Handbook of Induction Heating reflects the number of substantial advances that have taken place over the last decade in theory, computer modeling, semi-conductor power supplies, and process technology of induction heating and induction heat treating. This edition continues to be a synthesis of information, discoveries, and technical insights that have been accumulated at Inductoheat Inc. With an emphasis on design and implementation, the newest edition of this seminal guide provides numerous case studies, ready-to-use tables, diagrams, rules-of-thumb, simplified formulas, and graphs for working professionals and students.
Download or read book Technical Aids for Small Business Annual written by United States. Small Business Administration and published by . This book was released on 1956 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flame Hardening written by H. W. Gronegress and published by . This book was released on 2014-09-01 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASM Handbook written by and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of the Hydraulics of Horizontal Drains in Plumbing Systems written by Robert S. Wyly and published by . This book was released on 1964 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Results are reported from an investigation of the hydraulics of flow in experimental apparatus simulating nominally horizontal simple and branching drains of plumbing systems. The data are correlated with limited findings in an earlier, unpublished NBS study the results of which have been utilized in current plumbing codes. The need for further research is pointed out, particularly in relation to hydraulic performance of drain systems as affected by steep slopes, drain storage volume, energy losses at stack bases, attenuation of water depths and discharge rates in long drains, and large drain diameters.
Download or read book Official Gazette of the United States Patent Office written by United States. Patent Office and published by . This book was released on 1942 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of heat treatment of steels written by Romesh C. Sharma and published by New Age International. This book was released on 2003 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Treatment Of Steels As An Art To Improve Their Service Performance Has Been Practised Ever Since It Started To Be Used As Tools And Weapons.However, The Scientific Basis Of Heat Treatment Of Steels Became More Apparent Only In The First Half Of This Century And Still Some Gaps Remain In Its Complete Understanding.Earlier Books On Heat Treatment Of Steels Mainly Emphasised The Art And The Empirically Arrived Principles Of Heat Treatment. In The Last Few Decades, Our Understanding Of Phase Transformations And Mechanical Behaviour Of Steels, And Consequently Of Heat Treatment Of Steels, Has Considerably Increased.In This Book On Principles Of Heat Treatment Of Steels The Emphasis Is On The Scientific Principles Behind The Various Heat Treatment Processes Of Steels. Though It Is Expected That The Reader Has Sufficient Background In Phase Transformations And Mechanical Behaviour Of Materials, First Few Chapters Review These Topics With Specific Reference To Steels. Basic Principles Of Various Heat Treatment Processes Of Steels Including Surface Hardening Processes, Are Then Covered In Sufficient Detail To Give A Good Overall Understanding Of These Processes. The Detail Engineering Aspects Are, However, Omitted. These Are Easily Available In Various Handbooks On Heat Treatment. The Book Also Covers Heat Treatment Of Tool Steels And Cast Irons.The Book Has Been Well Written And Can Be Used A Textbook On Heat Treatment For Undergraduate Students. It Is Also A Good Reference Book For Teachers And Researchers In This Area And Engineers In The Industry.
Download or read book Manufacturing Technology written by D. K. Singh and published by Pearson Education India. This book was released on 2008 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of Manufacturing Technology retains the flavour of the first edition by providing readers with comprehensive coverage of theory with a diverse array of exercises. Designed for extensive practice and self study, this book presents theory in an encapsulated format for quick reading. Objective questions and numerical problems are accompanied by their solutions to aid understanding.
Download or read book Manufacturing Technology written by Helmi A. Youssef and published by CRC Press. This book was released on 2023-08-17 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition textbook provides comprehensive knowledge and insight into various aspects of manufacturing technology, processes, materials, tooling, and equipment. Its main objective is to introduce the grand spectrum of manufacturing technology to individuals who will be involved in the design and manufacturing of finished products and to provide them with basic information on manufacturing technologies. Manufacturing Technology: Materials, Processes, and Equipment, Second Edition, is written in a descriptive manner, where the emphasis is on the fundamentals of the process, its capabilities, typical applications, advantages, and limitations. Mathematical modeling and equations are used only when they enhance the basic understanding of the material dealt with. The book is a fundamental textbook that covers all the manufacturing processes, materials, and equipment used to convert the raw materials to a final product. It presents the materials used in manufacturing processes and covers the heat treatment processes, smelting of metals, and other technological processes such as casting, forming, powder metallurgy, joining processes, and surface technology. Manufacturing processes for polymers, ceramics, and composites are also covered. The book also covers surface technology, fundamentals of traditional and nontraditional machining processes, numerical control of machine tools, industrial robots and hexapods, additive manufacturing, and industry 4.0 technologies. The book is written specifically for undergraduates in industrial, manufacturing, mechanical, and materials engineering disciplines of the second to fourth levels to cover complete courses of manufacturing technology taught in engineering colleges and institutions all over the world. It also covers the needs of production and manufacturing engineers and technologists participating in related industries where it is expected to be part of their professional library. Additionally, the book can be used by students in other disciplines concerned with design and manufacturing, such as automotive and aerospace engineering.
Download or read book A Text Book of Metallurgy written by AVINASH KAMBLE and published by HARSHAL PUBLICATIONS. This book was released on 2017-07-04 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material selection is very important phase of development of new product. Metallurgy subject deals with the study of compositions and properties of ferrous and non-ferrous materials. Metallurgy is an important subject for Mechanical/ Production/ Metallurgy branch. It gives us an immense pleasure to present first edition of Text book of Metallurgy for Mechanical Engineering students. This book contains nine chapters. Initially, properties and applications of ferrous and non-ferrous alloys are described. Later, various heat treatment processes are described. Along with this, powder metallurgy process and destructive and non-destructive testing methods are briefly described. We hope the entire manuscript of this book will serve the purpose and reach to the students as ready text as well as reference book.
Download or read book Technical Data Digest written by and published by . This book was released on 1949 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for Engineers and Technicians written by William Bolton and published by Routledge. This book was released on 2014-10-03 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive yet accessible introduction to materials engineering which provides a straightforward, readable approach to the subject. The sixth edition includes a new chapter on the selection of materials, an updated discussion of new materials, and a complete glossary of key terms used in materials engineering. This renowned text has provided many thousands of students with an easily accessible introduction to the wide ranging subject area of materials engineering and manufacturing processes for over forty years. It avoids the excessive jargon and mathematical complexity so often found in textbooks for this subject, retaining the practical down-to-earth approach for which the book is noted. The increased emphasis on the selection of materials reflects the increased emphasis on this aspect of materials engineering now seen within current vocational and university courses. In addition to meeting the requirements of vocational and undergraduate engineering syllabuses, this text will also provide a valuable desktop reference for professional engineers working in product design who require a quick source of information on materials and manufacturing processes.
