Download or read book Fire and Explosion Hazards Handbook of Industrial Chemicals written by Nicholas P. Cheremisinoff and published by Elsevier. This book was released on 2013-10-22 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook provides ready information on the fire and chemical reactivity of commonly used chemicals. Its purpose is to provide basic information important to the safe handling of chemicals and to help provide guidance in responding to a hazardous materials incident, in particular, incidents involving reactive chemicals and materials posing fire and explosion hazards. The volume has been written for chemical handling specialists, first responders to hazardous materials incidents, and firefighters. The basic definition used for a hazard materials incident is any situation that may potentially lead to catastrophic fire or explosion, and or human exposed to a toxic chemical. This situation may result from a spill of a hazardous material, a leak from a storage vessel or shipping container, or the mixing of incompatible chemicals whereby a chemical reaction could occur resulting in the release of energy and generation of toxic and perhaps flammable by-products. The volume provides chemical specific information, providing the reader with rigorous information on the chemical of interest.This book is a compendium of chemical specific fire and chemical reactivity data and information. More than 1,000 chemicals have been researched and organized into a reference handbook for fire specialists, chemical handling specialists, and plant safety engineers. The specific information provided for chemicals includes the flammability characteristics, recommended fire extinguishing practices, fire extinguishing agents not to be used, behavior in fires, burning characteristics, chemical reactivity with regard to water and common materials, incompatible chemical mixtures, containment and neutralization methods for spills. This reference book has been designed as a data bank for the hazardous materials handling specialist and industrial safety managers dealing with large chemical inventories. It is intended to be used by fire and loss prevention specialists and as a basis for developing procedures for safe storing and handling of chemicals. The authors have included an extensive physical properties section on chemicals, with information most pertinent to fire response situations.

Download or read book Fire Explosion Hazards Handbook Of Industrial Chemicals written by Davletshina & Chermisinoff and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compendium of chemical specific fire and chemical reactivity data and information. More than 1000 chemicals have been researched and organized into a reference handbook for fire specialist, chemical handling specialist, and plant safety engineers. The specific information provided for chemicals includes the flammability characteristics, recommended fire extinguishing practices, fire extinguishing agents not to be use, behavior in fires, burning characteristics, chemical reactivity with regard to water and common materials, incompatible chemical mixtures, containment and neutralization methods for spills.

Download or read book Handbook of Fire and Explosion Protection Engineering Principles written by Dennis P. Nolan and published by William Andrew. This book was released on 2014-05-28 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an engineer for engineers, this book is both training manual and on-going reference, bringing together all the different facets of the complex processes that must be in place to minimize the risk to people, plant and the environment from fires, explosions, vapour releases and oil spills. Fully compliant with international regulatory requirements, relatively compact but comprehensive in its coverage, engineers, safety professionals and concerned company management will buy this book to capitalize on the author’s life-long expertise. This is the only book focusing specifically on oil and gas and related chemical facilities. This new edition includes updates on management practices, lessons learned from recent incidents, and new material on chemical processes, hazards and risk reviews (e.g. CHAZOP). Latest technology on fireproofing, fire and gas detection systems and applications is also covered. An introductory chapter on the philosophy of protection principles along with fundamental background material on the properties of the chemicals concerned and their behaviours under industrial conditions, combined with a detailed section on modern risk analysis techniques makes this book essential reading for students and professionals following Industrial Safety, Chemical Process Safety and Fire Protection Engineering courses. A practical, results-oriented manual for practicing engineers, bringing protection principles and chemistry together with modern risk analysis techniques Specific focus on oil and gas and related chemical facilities, making it comprehensive and compact Includes the latest best practice guidance, as well as lessons learned from recent incidents

Download or read book Handbook of Industrial Toxicology and Hazardous Materials written by Nicholas P. Cheremisinoff and published by CRC Press. This book was released on 1999-01-12 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing vital safety information on over 1000 commerical chemicals, this work explores up-to-date data on fire and chemical compatibility, response methods for incidents involving chemical spills and fires, and personnel and worksite safety monitoring and sampling. The book includes more than 700 illustrations, structures, equations and tables, and a glossary with over 700 definitions.

Download or read book Bretherick s Handbook of Reactive Chemical Hazards written by L. Bretherick and published by Elsevier. This book was released on 2016-10-27 with total page 2058 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bretherick's Handbook of Reactive Chemical Hazards, Fourth Edition, has been prepared and revised to give access to a wide and up-to-date selection of documented information to research students, practicing chemists, safety officers, and others concerned with the safe handling and use of reactive chemicals. This will allow ready assessment of the likely potential for reaction hazards which may be associated with an existing or proposed chemical compound or reaction system. A secondary, longer-term purpose is to present the information in a way which will, as far as possible, bring out the causes of, and interrelationships between, apparently disconnected facts and incidents. This handbook includes all information which had become available to the author by April 1989 on the reactivity hazards of individual elements or compounds, either alone or in combination. It begins with an introductory chapter that provides an overview of the complex subject of reactive chemical hazards, drawing attention to the underlying principles and to some practical aspects of minimizing such hazards. This is followed by two sections: Section 1 provides detailed information on the hazardous properties of individual chemicals, either alone or in combination with other compounds; the entries in Section 2 are of two distinct types. The first type of entry gives general information on the hazardous behavior of some recognizably discrete classes or groups of the 4,600 or so individual compounds for which details are given in Section 1. The second type of entry concerns reactive hazard topics, techniques, or incidents which have a common theme or pattern of behavior involving compounds of several different groups, so that no common structural feature exists for the compounds involved.

Download or read book Safety of Reactive Chemicals and Pyrotechnics written by Y. Wada and published by Elsevier. This book was released on 1995-11-20 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents involving reactive chemicals can often be prevented, or their effects alleviated, if those handling them have a sound knowledge both of their hazardous properties and of appropriate handling methods. This book addresses this need. It opens with a definition of the key technical terms and evaluation methods for hazardous materials are outlined. Chapter 2 covers accidents involving self-reactive substances, accidents occurring during chemical reactions, and accidents involving hazardous products in the event of an earthquake. In the next three chapters, methods for evaluating fire and explosion hazards of reactive substances are covered. The test methods described include DSC test using a sealed cell, impact sensitivity tests, the ignitability test, burning tests, the pyrolytic severity test, and shock sensitivity tests. Recently, the Japanese Fire Services Law was amended, requiring hazardous materials to be evaluated and classified by appropriate tests. These test methods, described in chapter 4, are related to oxidising solids, combustible solids, spontaneous ignition substances, and water-reactive substances. The final chapter gives examples of the safety assessment of various pyrotechnics. There are few books available on this subject and none so comprehensive. Each of the methods described is practical, effective and of low cost; and many of the application results are from the author's own laboratory. The book will be invaluable to those in public and industrial safety laboratories, R & D chemical laboratories, Fire Departments, explosives manufacturers, and those responsible for the transportation of hazardous materials.

Download or read book Industrial Fire Hazards Handbook written by Gordon P. McKinnon and published by National Fire Protection Association (NFPA). This book was released on 1979 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hazardous Chemicals Handbook written by P A CARSON and published by Elsevier. This book was released on 2013-10-22 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes core information for quick reference in the workplace, using tables and checklists wherever possible. Essential reading for safety officers, company managers, engineers, transport personnel, waste disposal personnel, environmental health officers, trainees on industrial training courses and engineering students. This book provides concise and clear explanation and look-up data on properties, exposure limits, flashpoints, monitoring techniques, personal protection and a host of other parameters and requirements relating to compliance with designated safe practice, control of hazards to people's health and limitation of impact on the environment. The book caters for the multitude of companies, officials and public and private employees who must comply with the regulations governing the use, storage, handling, transport and disposal of hazardous substances. Reference is made throughout to source documents and standards, and a Bibliography provides guidance to sources of wider ranging and more specialized information. Dr Phillip Carson is Safety Liaison and QA Manager at the Unilever Research Laboratory at Port Sunlight. He is a member of the Institution of Occupational Safety and Health, of the Institution of Chemical Engineers' Loss Prevention Panel and of the Chemical Industries Association's `Exposure Limits Task Force' and `Health Advisory Group'. Dr Clive Mumford is a Senior Lecturer in Chemical Engineering at the University of Aston and a consultant. He lectures on several courses of the Certificate and Diploma of the National Examining Board in Occupational Safety and Health. [Given 5 star rating] - Occupational Safety & Health, July 1994 - Loss Prevention Bulletin, April 1994 - Journal of Hazardous Materials, November 1994 - Process Safety & Environmental Prot., November 1994

Download or read book Fire Hazards in Industry written by Norman Thomson and published by Elsevier. This book was released on 2001-12-06 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant loss to business occurs through fires in the workplace. Whether large or small, fire causes personal suffering, damage to plant, equipment and buildings, and loss of business. Fire legislation has changed over the past few years, especially with the introduction of European Directives. New regulations mean that employers have to carry out fire risk assessment and then, as a result of their findings, put in place control measures to prevent loss of life. Fire Hazards in Industry has been designed to cover, in general terms, exactly what is required of employers. It is written in simple language and considers the basics of good fire safety management. After reading Fire Hazards in Industry, any employer, safety professional or fire safety officer should be able to install a system for carrying out fire risk assessment. In addition to sections relating to the legal aspects of fire prevention, the book explains the concepts of fire modelling, explosions and combustion reactions. There is also a section relating to common industry fire hazards and hazards associated with electrical equipment. Knowledge of all these topics would be required if a person were to attempt to carry out fire risk assessment. Throughout the book, past case histories are used to illustrate certain aspects of fire and the causes of fire. The cases used have all been published by the Health and Safety Executive as a result of their investigations. These include; Abbeystead, Frodingham steelworks, HMS Glasgow, BP Grangemouth and many more. This book will be equally relevant to motor manufacturing as it is to the chemical industry. There are many case studies included that deal with fire hazards that are found in general industry.Fire Hazards in Industry is suitable for those who have relatively limited experience in fire safety and therefore use it as part of their career and educational development, but also can be used as reference material for those experienced professionals who have fire safety included in their day to day responsibility.

Download or read book Bretherick s Handbook of Reactive Chemical Hazards written by Peter Urben and published by Elsevier. This book was released on 2017-03-18 with total page 1522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bretherick's Handbook of Reactive Chemical Hazards, Eighth Edition presents the latest updates on the unexpected, but predictable, loss of containment and explosion hazards from chemicals and their admixtures and actual accidents. The extensively cross-referenced book enables readers to avoid explosion and loss of containment of chemicals. Primary and more specialized sources are easily traced, and this new edition includes available record updates, also adding a number of new records. In this newly updated and expanded edition, the content is presented in a clear and user-friendly format. Includes new pure compound/class of compounds records and updates on all existing records Presents a worldwide unique reference work on chemical reactive hazards Lists important hazardous reactions and includes references to real chemical incidents Provides guidelines on the safe use and handling of chemicals In the lab and industry

Download or read book Explosion Hazards in the Process Industries written by Rolf K. Eckhoff and published by Gulf Professional Publishing. This book was released on 2016-06-14 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosion Hazards in the Process Industries, Second Edition, delivers the most current and comprehensive content for today’s process engineer. Process safety and petrochemical engineers inherently accept that there is a risk of explosions when working on process facilities such as plants and refineries. Yet many that enter this field do not have a fundamental starting point to understand the nature of explosions, and there are a lot of misconceptions and impartial information in the market. Explosion Hazards in the Process Industries, Second Edition, answers this need by providing engineers and consultants a go-to reference and training guide to understand the principles of explosions, what causes them, and how to mitigate and prevent them from reoccurring. Enhanced to include new chapters on BLEVE (Boiling Liquid Expanding Vapor Explosions), water vapor explosions, and destructive effects from accidental explosions, this guide continues to fulfill a comprehensive introduction to the subject, rounded out with new case studies, references, and a discussion on methods of hazard and risk analysis. Eckoff, Dust Explosions in the Process Industries, 3rd Edition, 9780750676021, Jun 2003, $240.00 Amyotte, An Introduction to Dust Explosions, 9780123970077, Jun 2013, $49.95 Barton, Dust Explosion Prevention and Protection, 9780750675192, Mar 2002, $155.00 Nolan, Handbook of Fire and Explosion Protection Engineering Handbook Principles, 3rd, 9780323313018, May 2014, $160.00

Download or read book A Comprehensive Guide to the Hazardous Properties of Chemical Substances written by Pradyot Patnaik and published by John Wiley & Sons. This book was released on 2007-05-25 with total page 1086 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to the hazardous properties of chemical compounds Correlating chemical structure with toxicity to humans and the environment, and the chemical structure of compounds to their hazardous properties, A Comprehensive Guide to the Hazardous Properties of Chemical Substances, Third Edition allows users to assess the toxicity of a substance even when no experimental data exists. Thus, it bridges the gap between hazardous materials and chemistry. Extensively updated and expanded, this reference: Examines organics, metals and inorganics, industrial solvents, common gases, particulates, explosives, and radioactive substances, covering everything from toxicity and carcinogenicity to flammability and explosive reactivity to handling and disposal practices Arranges hazardous chemical substances according to their chemical structures and functional groups for easy reference Includes updated information on the toxic, flammable, and explosive properties of chemical substances Covers additional metals in the chapters on toxic and reactive metals Updates the threshold exposure limits in the workplace air for a number of substances Features the latest information on industrial solvents and toxic and flammable gases Includes numerous tables, formulas, and a glossary for quick reference Because it provides information that enables those with a chemistry background to perform assessments without prior data, this comprehensive reference appeals to chemists, chemical engineers, toxicologists, and forensic scientists, as well as industrial hygienists, occupational physicians, Hazmat professionals, and others in related fields.

Download or read book Bretherick s Handbook of Reactive Chemical Hazards written by Martin John Pitt and published by Academic Press. This book was released on 2007 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an assembly of all reported risks such as explosion, fire, toxic or high-energy events that result from chemical reactions gone astray, with extensive referencing to the primary literature. Entries are ordered by empirical formula and indexed under both name(s) and Chemical Abstracts Registry Numbers. Toxicity hazards are only included for unexpected reactions giving volatile poisons.

Download or read book Handbook of Hazardous Chemical Properties written by Nicholas P Cheremisinoff and published by Elsevier. This book was released on 1999-11-08 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides extensive health (toxicological) and safety handling information and data on over 1,000 chemicals of commercial and industrial importance. This volume will provide extensive health (toxicological) and safe-handling information and data on more than 1000 chemicals of commercial and industrial importance. It provides chemical specific information pertinent to safe handling and transportation of chemicals, worker protection, emergency response information to address spills, explosions on fire situations, and chemical stability/reactivity data. It is designed as a standard reference handbook for chemical engineers, safety engineers, toxicologists, fire safety specialists, chemists, laboratory and plant technicians. Provides extensive health and safe-handling information on more than 1,000 Standard reference work for those involved in chemical engineering and related fields

Download or read book Industrial Fire Hazards Handbook written by Jim L. Linville and published by National Fire Protection Association (NFPA). This book was released on 1984 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fire Fighter s Handbook of Hazardous Materials written by Charles J. Baker and published by Jones & Bartlett Learning. This book was released on 2005-05 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hazardous materials are an inevitable part of every fire fighter's job. Knowing how to operate safely and take the necessary precautions is crucial. The Fire Fighter's Handbook of Hazardous Materials, Seventh Edition is a quick and simple reference book of hazardous substances that fire fighters are likely to encounter.

Download or read book Industrial Fire Safety Guidebook written by Tatyana Davletshina and published by Elsevier. This book was released on 1998-12-31 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference has been written for emergency response personnel, plant safety specialists, and emergency response coordinators. It has been prepared at a practical level to assist both in training safety personnel and to provide technical information that can assist in responding to a hazard material incident that could lead to a fire hazard situation. Considerable information and technical data are given on petroleum based products since these are among the most widely consumed products, however, the reader will find ample information on other chemicals. Fire situations pose one of the most serious problems in an industrial setting, with the potential loss of lives and property, as well as damage to the environment. Proper response by trained personnel, as well as careful preplanning can minimize the risk and damage caused by fire.