Download or read book Fire Design of Concrete Structures Materials Structures and Modelling written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2007-01-01 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire design of concrete structures has emerged in recent years as a high profile subject of great interest to both experts and the public. This has been largely prompted by severe damage to concrete in a number of recent tunnel fires, as well as a considerable amount of research and development that has taken place world-wide. fib Task Group 4.3, "Fire Design of Concrete Structures", therefore took the initiative to develop this bulletin in order to present the results of this international research to a wider group of concrete professionals. The report presents a general brief outline of the effect of fire on both concrete material and concrete structures, with emphasis placed on the important developments of the past few years, namely: (a) the increasing use of high strength concrete (HSC) in buildings, tunnels and bridges; (b) the growing acceptance of the use of performance based fire engineering calculations for the structural analysis and design against fire; (c) the problem of, and solutions to, explosive spalling; and (d) fires in tunnels. This report is not intended to be an exhaustive review of the effect of fire on concrete and concrete structures, nor to present a database of properties at high temperature. Instead, the main aims of this document are to present recent trends and developments, highlight key influencing factors, bring together the disparate but related issues in one short document, highlight the deficiencies in current practice and point to the future. The basic principles of performance based codes and fire engineering are also presented on the assumption that the reader is not a specialist in this field.
Download or read book Fire Design of Concrete Structures Structural Behaviour and Assessment written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2008-01-01 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is well known to behave efficiently in fire conditions, as it is incombustible, does not emit smoke, and provides good thermal insulation. Furthermore, in reinforced concrete structures, the concrete cover gives a natural protection to the reinforcement, and the size of the sections often delays the heating of the core, thus favouring the fire resistance of the structural members. In addition, concrete structures are often robust and therefore able to accommodate local damage without major consequences to the overall structural integrity. However, past experience with real fires shows that a thorough understanding of concrete behaviour and structural mechanics is still needed to improve the design of R/C structures with respect to fire. The objective of fib Bulletin 46 is to augment the current knowledge about concrete and concrete structures under fire, not only for the design of new structures, but also for the analysis and repair of existing fire-damaged structures. Both structural and materials issues are examined, and the results of the most recent research activities on the structural performance of concrete subjected to fire are reported. Special attention is paid to the indirect actions caused by the restrained thermal deformations and several basic examples show how a local fire influences global structural behaviour. fib Bulletin 46 is intended for use by practicing engineers to improve their understanding of the behaviour of concrete structures in fire and thereby produce better and safer design standards.
Download or read book Abstracts of the International Workshop Fire Design of Concrete Structures From Materials Modelling to Structural Performance written by Fédération internationale du béton and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire design of concrete structures in accordance with CEB FIP model code 90 written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1991-07-01 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book fib Model Code for Concrete Structures 2010 written by fib - federation internationale du beton and published by John Wiley & Sons. This book was released on 2013-12-04 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Federation for Structural Concrete (fib) is a pre-normative organization. 'Pre-normative' implies pioneering work in codification. This work has now been realized with the fib Model Code 2010. The objectives of the fib Model Code 2010 are to serve as a basis for future codes for concrete structures, and present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. The fib Model Code 2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement. It is expected to become an important document for both national and international code committees, practitioners and researchers. The fib Model Code 2010 was produced during the last ten years through an exceptional effort by Joost Walraven (Convener; Delft University of Technology, The Netherlands), Agnieszka Bigaj-van Vliet (Technical Secretary; TNO Built Environment and Geosciences, The Netherlands) as well as experts out of 44 countries from five continents.
Download or read book Structural Concrete written by and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Fire resistant Concrete Structures written by Kristian Dahl Hertz and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Fire-resistant Concrete Structures gives a thorough insight into the behaviour of concrete structures when exposed to fire. It mixes theory, including physics and analysed data, with practice, and shows design methods for beams, slabs, columns and walls of fire-exposed cross-sections. It explains the physical processes that concrete materials experience when exposed to high temperatures, therefore allowing engineers to make informed decisions when choosing materials and designing concrete structures.
Download or read book Structural Concrete Textbook Volume 4 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2010-06-01 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) to fib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.
Download or read book Proceedings of the InternationaI Workshop Fire Design of Concrete Structures From Materials Modelling to Structural Performance written by João Paulo Correia Rodrigues and published by . This book was released on 2008 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Fire Performance of Contemporary Post tensioned Concrete Construction written by John Gales and published by Springer. This book was released on 2015-10-19 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SpringerBrief equips readers to develop defensible fire safety designs for a range of concrete structures. It identifies current gaps in the research and provides a more complete understanding of the structural and thermal response of contemporary Post-tensioned (PT) concrete structures to fire. The brief includes chapters on contemporary construction using PT concrete, previous structural fire test research programs, recent research programs, real fire case studies, and current research needs. It explores the progression of PT concrete structures, looking at the sustainability and aesthetic benefits, the ongoing development of stronger concretes, and best practice guidance for improving safety in the event of fire. Designed for practitioners and researchers in fire engineering, this brief is a valuable tool for those studying the impact of fire on concrete, fire safety designs, and building safety optimization. Advanced-level students in civil engineering will also find the content useful.
Download or read book Design of Fire resistant Concrete Structures written by Kristian Dahl Hertz and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Concrete Volume 2 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2010-01-01 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the Textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated Textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the Textbook.
Download or read book Integrated life cycle assessment of concrete structures written by fib Fédération Internationale du béton and published by fib Fédération Internationale du béton. This book was released on 2013-09-03 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is after water the second most used material. The production of concrete in the industrialized countries annually amounts to 1.5-3 tonne per capita and is still increasing. This has significant impact on the environment. Thus there is an urgent need for more effective use of concrete in structures and their assessment. The scope of activities of the fib Task Group 3.7 was to define the methodology for integrated life-cycle assessment of concrete structures considering main essential aspects of sustainability such as: environmental, economic and social aspects throughout the whole life of the concrete structure. The aim was to set up basic methodology to be helpful in development of design and assessment tools focused on sustainability of concrete structure within the whole life cycle. Integrated Life Cycle Assessment (ILCA) represents an advanced approach integrating different aspects of sustainability in one complex assessment procedure. The integrated approach is necessary to insure that the structure will serve during the whole expected service life with a maximum functional quality and safety, while environmental and economic loads will be kept at a low level. The effective application and quality of results are dependent on the availability of relevant input data obtained using a detailed inventory analysis, based on specific regional conditions. The evaluation of the real level of total quality of concrete structure should be based on a detailed ILCA analysis using regionally or locally relevant data sets.
Download or read book Code type models for concrete behaviour written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2013-11-01 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Model Code 2010 represents the state-of-the-art of code-type models for structural behaviour of concrete. It comprises constitutive relations and material models together with the most important explanatory notes. However the underlying normative work, i.e. the fundamental data as well as the considerations and discussions behind the formulas could not be given within the Model Code text. Based on various experiences gained after the publication of Model Code 1990 this lacking background information will lead in the following to numerous questions arising from Model Code users. Consequently the present bulletin claims to conquer this general weakness of codes in a way to guard against any future misunderstandings of the Model Code 2010 related to its chapter 5.1 (Concrete). It discusses the given formulas in connection with experimental data and the most important international literature. The constitutive relations or material models, being included in MC1990 and forming the basis and point of origin of the Task Group’s work, were critically evaluated, if necessary and possible adjusted, or replaced by completely new approaches. Major criteria have been the physical and thermodynamical soundness as well as practical considerations like simplicity and operationality. This state-of-the-art report is intended for practicizing engineers as well as for researchers and represents a comprehensible summary of the relevant knowledge available to the members of the fib Task Group 8.7 at the time of its drafting. Besides the fact that the bulletin is a background document for Chapter 5.1 of MC2010, it will provide an important foundation for the development of future generations of code-type models related to the characteristics and the behaviour of structural concrete. Further it will offer insights into the complexity of the normative work related to concrete modelling, leading to a better understanding and adequate appreciation of MC2010.
Download or read book Earthquake Engineering and Structural Dynamics in Memory of Ragnar Sigbj rnsson written by Rajesh Rupakhety and published by Springer. This book was released on 2017-12-07 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents methods and results that cover and extend beyond the state-of-the-art in structural dynamics and earthquake engineering. Most of the chapters are based on the keynote lectures at the International Conference in Earthquake Engineering and Structural Dynamics (ICESD), held in Reykjavik, Iceland, on June 12-14, 2017. The conference is being organised in memory of late Professor Ragnar Sigbjörnsson, who was an influential teacher and one of the leading researchers in the fields of structural mechanics, random fields, engineering seismology and earthquake engineering. Professor Sigbjörnsson had a close research collaboration with the Norwegian Institute of Science and Technology (NTNU), where his research was mainly focused in dynamics of marine and offshore structures. His research in Iceland was mainly focused on engineering seismology and earthquake engineering. The keynote-lecture based chapters are contributed by leading experts in these fields of research and showcase not only the historical perspective but also the most recent developments as well as a glimpse into the future. These chapters showcase a synergy of the fields of structural dynamics, engineering seismology, and earthquake engineering. In addition, some chapters in the book are based on works carried out under the leadership and initiative of Professor Sigbjörnsson and showcase his contribution to the understanding of seismic hazard and risk in Iceland. As such, the book is useful for both researchers and practicing engineers who are interested in recent research advances in structural dynamics and earthquake engineering, and in particular to those interested in seismic hazard and risk in Iceland.
Download or read book Model Code 2010 Final draft written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2012-01-01 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of MC2010 are to (a) serve as a basis for future codes for concrete structures, and (b) present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. MC2010 includes the whole life cycle of a concrete structure, from design and construction to conservation (assessment, maintenance, strengthening) and dismantlement, in one code for buildings, bridges and other civil engineering structures. Design is largely based on performance requirements. The chapter on materials is extended with new types of concrete and reinforcement (such as fibres and non-metallic reinforcements). The fib Model Code 2010 also gives corresponding explanations in a separate column of the document. Additionally, MC2010 is supported by background documents that have already been (or will soon be) published in fib bulletins and journal articles. MC2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement.
Download or read book Structures in Fire written by Venkatesh Kodur and published by DEStech Publications, Inc. This book was released on 2010 with total page 1047 pages. Available in PDF, EPUB and Kindle. Book excerpt: